| #include <linux/init.h> |
| #include <linux/suspend.h> |
| #include <asm/io.h> |
| #include <asm/time.h> |
| #include <asm/mpc52xx.h> |
| #include "mpc52xx_pic.h" |
| |
| /* defined in lite5200_sleep.S and only used here */ |
| extern void lite5200_low_power(void __iomem *sram, void __iomem *mbar); |
| |
| static struct mpc52xx_cdm __iomem *cdm; |
| static struct mpc52xx_intr __iomem *pic; |
| static struct mpc52xx_sdma __iomem *bes; |
| static struct mpc52xx_xlb __iomem *xlb; |
| static struct mpc52xx_gpio __iomem *gps; |
| static struct mpc52xx_gpio_wkup __iomem *gpw; |
| static void __iomem *sram; |
| static const int sram_size = 0x4000; /* 16 kBytes */ |
| static void __iomem *mbar; |
| |
| static suspend_state_t lite5200_pm_target_state; |
| |
| static int lite5200_pm_valid(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| case PM_SUSPEND_MEM: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int lite5200_pm_set_target(suspend_state_t state) |
| { |
| if (lite5200_pm_valid(state)) { |
| lite5200_pm_target_state = state; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int lite5200_pm_prepare(void) |
| { |
| /* deep sleep? let mpc52xx code handle that */ |
| if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) |
| return mpc52xx_pm_prepare(); |
| |
| if (lite5200_pm_target_state != PM_SUSPEND_MEM) |
| return -EINVAL; |
| |
| /* map registers */ |
| mbar = mpc52xx_find_and_map("mpc5200"); |
| if (!mbar) { |
| printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__); |
| return -ENOSYS; |
| } |
| |
| cdm = mbar + 0x200; |
| pic = mbar + 0x500; |
| gps = mbar + 0xb00; |
| gpw = mbar + 0xc00; |
| bes = mbar + 0x1200; |
| xlb = mbar + 0x1f00; |
| sram = mbar + 0x8000; |
| |
| return 0; |
| } |
| |
| /* save and restore registers not bound to any real devices */ |
| static struct mpc52xx_cdm scdm; |
| static struct mpc52xx_intr spic; |
| static struct mpc52xx_sdma sbes; |
| static struct mpc52xx_xlb sxlb; |
| static struct mpc52xx_gpio sgps; |
| static struct mpc52xx_gpio_wkup sgpw; |
| |
| static void lite5200_save_regs(void) |
| { |
| _memcpy_fromio(&spic, pic, sizeof(*pic)); |
| _memcpy_fromio(&sbes, bes, sizeof(*bes)); |
| _memcpy_fromio(&scdm, cdm, sizeof(*cdm)); |
| _memcpy_fromio(&sxlb, xlb, sizeof(*xlb)); |
| _memcpy_fromio(&sgps, gps, sizeof(*gps)); |
| _memcpy_fromio(&sgpw, gpw, sizeof(*gpw)); |
| |
| _memcpy_fromio(saved_sram, sram, sram_size); |
| } |
| |
| static void lite5200_restore_regs(void) |
| { |
| int i; |
| _memcpy_toio(sram, saved_sram, sram_size); |
| |
| |
| /* |
| * GPIOs. Interrupt Master Enable has higher address then other |
| * registers, so just memcpy is ok. |
| */ |
| _memcpy_toio(gpw, &sgpw, sizeof(*gpw)); |
| _memcpy_toio(gps, &sgps, sizeof(*gps)); |
| |
| |
| /* XLB Arbitrer */ |
| out_be32(&xlb->snoop_window, sxlb.snoop_window); |
| out_be32(&xlb->master_priority, sxlb.master_priority); |
| out_be32(&xlb->master_pri_enable, sxlb.master_pri_enable); |
| |
| /* enable */ |
| out_be32(&xlb->int_enable, sxlb.int_enable); |
| out_be32(&xlb->config, sxlb.config); |
| |
| |
| /* CDM - Clock Distribution Module */ |
| out_8(&cdm->ipb_clk_sel, scdm.ipb_clk_sel); |
| out_8(&cdm->pci_clk_sel, scdm.pci_clk_sel); |
| |
| out_8(&cdm->ext_48mhz_en, scdm.ext_48mhz_en); |
| out_8(&cdm->fd_enable, scdm.fd_enable); |
| out_be16(&cdm->fd_counters, scdm.fd_counters); |
| |
| out_be32(&cdm->clk_enables, scdm.clk_enables); |
| |
| out_8(&cdm->osc_disable, scdm.osc_disable); |
| |
| out_be16(&cdm->mclken_div_psc1, scdm.mclken_div_psc1); |
| out_be16(&cdm->mclken_div_psc2, scdm.mclken_div_psc2); |
| out_be16(&cdm->mclken_div_psc3, scdm.mclken_div_psc3); |
| out_be16(&cdm->mclken_div_psc6, scdm.mclken_div_psc6); |
| |
| |
| /* BESTCOMM */ |
| out_be32(&bes->taskBar, sbes.taskBar); |
| out_be32(&bes->currentPointer, sbes.currentPointer); |
| out_be32(&bes->endPointer, sbes.endPointer); |
| out_be32(&bes->variablePointer, sbes.variablePointer); |
| |
| out_8(&bes->IntVect1, sbes.IntVect1); |
| out_8(&bes->IntVect2, sbes.IntVect2); |
| out_be16(&bes->PtdCntrl, sbes.PtdCntrl); |
| |
| for (i=0; i<32; i++) |
| out_8(&bes->ipr[i], sbes.ipr[i]); |
| |
| out_be32(&bes->cReqSelect, sbes.cReqSelect); |
| out_be32(&bes->task_size0, sbes.task_size0); |
| out_be32(&bes->task_size1, sbes.task_size1); |
| out_be32(&bes->MDEDebug, sbes.MDEDebug); |
| out_be32(&bes->ADSDebug, sbes.ADSDebug); |
| out_be32(&bes->Value1, sbes.Value1); |
| out_be32(&bes->Value2, sbes.Value2); |
| out_be32(&bes->Control, sbes.Control); |
| out_be32(&bes->Status, sbes.Status); |
| out_be32(&bes->PTDDebug, sbes.PTDDebug); |
| |
| /* restore tasks */ |
| for (i=0; i<16; i++) |
| out_be16(&bes->tcr[i], sbes.tcr[i]); |
| |
| /* enable interrupts */ |
| out_be32(&bes->IntPend, sbes.IntPend); |
| out_be32(&bes->IntMask, sbes.IntMask); |
| |
| |
| /* PIC */ |
| out_be32(&pic->per_pri1, spic.per_pri1); |
| out_be32(&pic->per_pri2, spic.per_pri2); |
| out_be32(&pic->per_pri3, spic.per_pri3); |
| |
| out_be32(&pic->main_pri1, spic.main_pri1); |
| out_be32(&pic->main_pri2, spic.main_pri2); |
| |
| out_be32(&pic->enc_status, spic.enc_status); |
| |
| /* unmask and enable interrupts */ |
| out_be32(&pic->per_mask, spic.per_mask); |
| out_be32(&pic->main_mask, spic.main_mask); |
| out_be32(&pic->ctrl, spic.ctrl); |
| } |
| |
| static int lite5200_pm_enter(suspend_state_t state) |
| { |
| /* deep sleep? let mpc52xx code handle that */ |
| if (state == PM_SUSPEND_STANDBY) { |
| return mpc52xx_pm_enter(state); |
| } |
| |
| lite5200_save_regs(); |
| |
| /* effectively save FP regs */ |
| enable_kernel_fp(); |
| |
| lite5200_low_power(sram, mbar); |
| |
| lite5200_restore_regs(); |
| |
| /* restart jiffies */ |
| wakeup_decrementer(); |
| |
| iounmap(mbar); |
| return 0; |
| } |
| |
| static void lite5200_pm_finish(void) |
| { |
| /* deep sleep? let mpc52xx code handle that */ |
| if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) |
| mpc52xx_pm_finish(); |
| } |
| |
| static struct platform_suspend_ops lite5200_pm_ops = { |
| .valid = lite5200_pm_valid, |
| .set_target = lite5200_pm_set_target, |
| .prepare = lite5200_pm_prepare, |
| .enter = lite5200_pm_enter, |
| .finish = lite5200_pm_finish, |
| }; |
| |
| int __init lite5200_pm_init(void) |
| { |
| suspend_set_ops(&lite5200_pm_ops); |
| return 0; |
| } |