patch-mxc-add-ARCH_MX1
Adds MX1 architecture to platform MXC. It will supersede mach-imx
and let it die.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a161295..16cb07cd 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -6,6 +6,11 @@
prompt "MXC/iMX Base Type"
default ARCH_MX3
+config ARCH_MX1
+ bool "MX1-based"
+ help
+ This enables support for systems based on the Freescale i.MX1 family
+
config ARCH_MX2
bool "MX2-based"
select CPU_ARM926T
@@ -20,6 +25,7 @@
endchoice
+source "arch/arm/mach-mx1/Kconfig"
source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 067556f..db74a92 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,4 +5,5 @@
# Common support
obj-y := irq.o clock.o gpio.o time.o devices.o
+obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index de5c474..ccbd94a 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -115,8 +115,8 @@
}
}
-#ifdef CONFIG_ARCH_MX3
-/* MX3 has one interrupt *per* gpio port */
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
+/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
u32 irq_stat;
@@ -237,7 +237,7 @@
/* its a serious configuration bug when it fails */
BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
/* setup one handler for each entry */
set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 3caadee..a612d8b 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -32,6 +32,10 @@
# endif
#endif
+#ifdef CONFIG_ARCH_MX1
+# include <mach/mx1.h>
+#endif
+
#include <mach/mxc.h>
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
new file mode 100644
index 0000000..e7f6d00
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 1997,1998 Russell King
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX1_H__
+#define __ASM_ARCH_MXC_MX1_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+#include <mach/vmalloc.h>
+
+/*
+ * defines the hardware clock tick rate
+ */
+#define CLOCK_TICK_RATE 16000000
+
+#define PHYS_OFFSET UL(0x08000000)
+
+/*
+ * Memory map
+ */
+#define IMX_IO_PHYS 0x00200000
+#define IMX_IO_SIZE 0x00100000
+#define IMX_IO_BASE VMALLOC_END
+
+#define IMX_CS0_PHYS 0x10000000
+#define IMX_CS0_SIZE 0x02000000
+
+#define IMX_CS1_PHYS 0x12000000
+#define IMX_CS1_SIZE 0x01000000
+
+#define IMX_CS2_PHYS 0x13000000
+#define IMX_CS2_SIZE 0x01000000
+
+#define IMX_CS3_PHYS 0x14000000
+#define IMX_CS3_SIZE 0x01000000
+
+#define IMX_CS4_PHYS 0x15000000
+#define IMX_CS4_SIZE 0x01000000
+
+#define IMX_CS5_PHYS 0x16000000
+#define IMX_CS5_SIZE 0x01000000
+
+/*
+ * Register BASEs, based on OFFSETs
+ */
+#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS)
+#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS)
+#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS)
+#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS)
+#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS)
+#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS)
+#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS)
+#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS)
+#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS)
+#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS)
+#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS)
+#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS)
+#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS)
+#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS)
+#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS)
+#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS)
+#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS)
+#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS)
+#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS)
+#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS)
+#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS)
+#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS)
+#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS)
+#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS)
+#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS)
+#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS)
+#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS)
+#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS)
+#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE)
+
+/* define macros needed for entry-macro.S */
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+
+/* fixed interrput numbers */
+#define INT_SOFTINT 0
+#define CSI_INT 6
+#define DSPA_MAC_INT 7
+#define DSPA_INT 8
+#define COMP_INT 9
+#define MSHC_XINT 10
+#define GPIO_INT_PORTA 11
+#define GPIO_INT_PORTB 12
+#define GPIO_INT_PORTC 13
+#define LCDC_INT 14
+#define SIM_INT 15
+#define SIM_DATA_INT 16
+#define RTC_INT 17
+#define RTC_SAMINT 18
+#define UART2_MINT_PFERR 19
+#define UART2_MINT_RTS 20
+#define UART2_MINT_DTR 21
+#define UART2_MINT_UARTC 22
+#define UART2_MINT_TX 23
+#define UART2_MINT_RX 24
+#define UART1_MINT_PFERR 25
+#define UART1_MINT_RTS 26
+#define UART1_MINT_DTR 27
+#define UART1_MINT_UARTC 28
+#define UART1_MINT_TX 29
+#define UART1_MINT_RX 30
+#define VOICE_DAC_INT 31
+#define VOICE_ADC_INT 32
+#define PEN_DATA_INT 33
+#define PWM_INT 34
+#define SDHC_INT 35
+#define I2C_INT 39
+#define CSPI_INT 41
+#define SSI_TX_INT 42
+#define SSI_TX_ERR_INT 43
+#define SSI_RX_INT 44
+#define SSI_RX_ERR_INT 45
+#define TOUCH_INT 46
+#define USBD_INT0 47
+#define USBD_INT1 48
+#define USBD_INT2 49
+#define USBD_INT3 50
+#define USBD_INT4 51
+#define USBD_INT5 52
+#define USBD_INT6 53
+#define BTSYS_INT 55
+#define BTTIM_INT 56
+#define BTWUI_INT 57
+#define TIM2_INT 58
+#define TIM1_INT 59
+#define DMA_ERR 60
+#define DMA_INT 61
+#define GPIO_INT_PORTD 62
+#define WDT_INT 63
+
+#define MXC_MAX_INT_LINES 64
+
+#define NR_IRQS 256
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* DMA */
+#define DMA_REQ_UART3_T 2
+#define DMA_REQ_UART3_R 3
+#define DMA_REQ_SSI2_T 4
+#define DMA_REQ_SSI2_R 5
+#define DMA_REQ_CSI_STAT 6
+#define DMA_REQ_CSI_R 7
+#define DMA_REQ_MSHC 8
+#define DMA_REQ_DSPA_DCT_DOUT 9
+#define DMA_REQ_DSPA_DCT_DIN 10
+#define DMA_REQ_DSPA_MAC 11
+#define DMA_REQ_EXT 12
+#define DMA_REQ_SDHC 13
+#define DMA_REQ_SPI1_R 14
+#define DMA_REQ_SPI1_T 15
+#define DMA_REQ_SSI_T 16
+#define DMA_REQ_SSI_R 17
+#define DMA_REQ_ASP_DAC 18
+#define DMA_REQ_ASP_ADC 19
+#define DMA_REQ_USP_EP(x) (20 + (x))
+#define DMA_REQ_SPI2_R 26
+#define DMA_REQ_SPI2_T 27
+#define DMA_REQ_UART2_T 28
+#define DMA_REQ_UART2_R 29
+#define DMA_REQ_UART1_T 30
+#define DMA_REQ_UART1_R 31
+
+/* mandatory for CONFIG_LL_DEBUG */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
index 130aebf..6c19a13 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -26,7 +26,7 @@
#include <linux/clk.h>
#include <mach/hardware.h>
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
#define TIMER_INTERRUPT TIM1_INT
@@ -65,7 +65,7 @@
{
__raw_writel(0, TIMER_BASE + MXC_TSTAT);
}
-#endif /* CONFIG_ARCH_IMX */
+#endif /* CONFIG_ARCH_MX1 */
#ifdef CONFIG_ARCH_MX2
#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)