rt2x00:Add RT5392 chipset support
Signed-off-by: Zero.Lin <Zero.Lin@mediatek.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 6403f49..1ca88cd 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -72,6 +72,7 @@
#define RF5370 0x5370
#define RF5372 0x5372
#define RF5390 0x5390
+#define RF5392 0x5392
/*
* Chipset revisions.
@@ -1946,6 +1947,11 @@
#define RFCSR49_TX FIELD8(0x3f)
/*
+ * RFCSR 50:
+ */
+#define RFCSR50_TX FIELD8(0x3f)
+
+/*
* RF registers
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 11488e7..4d3747c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1958,7 +1958,22 @@
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+ if (rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
+ if (info->default_power1 > RT5390_POWER_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX,
+ RT5390_POWER_BOUND);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX,
+ info->default_power2);
+ rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+ }
+
rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ if (rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+ }
rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -2064,6 +2079,7 @@
case RF5370:
case RF5372:
case RF5390:
+ case RF5392:
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
break;
default:
@@ -2554,6 +2570,7 @@
case RF5370:
case RF5372:
case RF5390:
+ case RF5392:
rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
@@ -4269,6 +4286,7 @@
case RF5370:
case RF5372:
case RF5390:
+ case RF5392:
break;
default:
ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n",
@@ -4583,7 +4601,8 @@
rt2x00_rf(rt2x00dev, RF5360) ||
rt2x00_rf(rt2x00dev, RF5370) ||
rt2x00_rf(rt2x00dev, RF5372) ||
- rt2x00_rf(rt2x00dev, RF5390)) {
+ rt2x00_rf(rt2x00dev, RF5390) ||
+ rt2x00_rf(rt2x00dev, RF5392)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
} else if (rt2x00_rf(rt2x00dev, RF3052)) {
@@ -4670,6 +4689,7 @@
case RF5370:
case RF5372:
case RF5390:
+ case RF5392:
__set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
break;
}