| /* |
| * linux/arch/arm/mach-mmp/time.c |
| * |
| * Support for clocksource and clockevents |
| * |
| * Copyright (C) 2008 Marvell International Ltd. |
| * All rights reserved. |
| * |
| * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> |
| * 2008-10-08: Bin Yang <bin.yang@marvell.com> |
| * |
| * The timers module actually includes three timers, each timer with upto |
| * three match comparators. Timer #0 is used here in free-running mode as |
| * the clock source, and match comparator #1 used as clock event device. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/clockchips.h> |
| |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/sched.h> |
| |
| #include <asm/sched_clock.h> |
| #include <mach/addr-map.h> |
| #include <mach/regs-timers.h> |
| #include <mach/regs-apbc.h> |
| #include <mach/irqs.h> |
| #include <mach/cputype.h> |
| #include <asm/mach/time.h> |
| |
| #include "clock.h" |
| |
| #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE |
| |
| #define MAX_DELTA (0xfffffffe) |
| #define MIN_DELTA (16) |
| |
| static DEFINE_CLOCK_DATA(cd); |
| |
| /* |
| * FIXME: the timer needs some delay to stablize the counter capture |
| */ |
| static inline uint32_t timer_read(void) |
| { |
| int delay = 100; |
| |
| __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); |
| |
| while (delay--) |
| cpu_relax(); |
| |
| return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); |
| } |
| |
| unsigned long long notrace sched_clock(void) |
| { |
| u32 cyc = timer_read(); |
| return cyc_to_sched_clock(&cd, cyc, (u32)~0); |
| } |
| |
| static void notrace mmp_update_sched_clock(void) |
| { |
| u32 cyc = timer_read(); |
| update_sched_clock(&cd, cyc, (u32)~0); |
| } |
| |
| static irqreturn_t timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *c = dev_id; |
| |
| /* disable and clear pending interrupt status */ |
| __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); |
| __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); |
| c->event_handler(c); |
| return IRQ_HANDLED; |
| } |
| |
| static int timer_set_next_event(unsigned long delta, |
| struct clock_event_device *dev) |
| { |
| unsigned long flags, next; |
| |
| local_irq_save(flags); |
| |
| /* clear pending interrupt status and enable */ |
| __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); |
| __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); |
| |
| next = timer_read() + delta; |
| __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| static void timer_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *dev) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| switch (mode) { |
| case CLOCK_EVT_MODE_ONESHOT: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| /* disable the matching interrupt */ |
| __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0)); |
| break; |
| case CLOCK_EVT_MODE_RESUME: |
| case CLOCK_EVT_MODE_PERIODIC: |
| break; |
| } |
| local_irq_restore(flags); |
| } |
| |
| static struct clock_event_device ckevt = { |
| .name = "clockevent", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .shift = 32, |
| .rating = 200, |
| .set_next_event = timer_set_next_event, |
| .set_mode = timer_set_mode, |
| }; |
| |
| static cycle_t clksrc_read(struct clocksource *cs) |
| { |
| return timer_read(); |
| } |
| |
| static struct clocksource cksrc = { |
| .name = "clocksource", |
| .rating = 200, |
| .read = clksrc_read, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| static void __init timer_config(void) |
| { |
| uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); |
| uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); |
| uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); |
| |
| __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ |
| |
| ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); |
| __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); |
| |
| /* free-running mode */ |
| __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); |
| |
| __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ |
| __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ |
| __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); |
| |
| /* enable timer counter */ |
| __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); |
| } |
| |
| static struct irqaction timer_irq = { |
| .name = "timer", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = timer_interrupt, |
| .dev_id = &ckevt, |
| }; |
| |
| void __init timer_init(int irq) |
| { |
| timer_config(); |
| |
| init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE); |
| |
| ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); |
| ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); |
| ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt); |
| ckevt.cpumask = cpumask_of(0); |
| |
| setup_irq(irq, &timer_irq); |
| |
| clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); |
| clockevents_register_device(&ckevt); |
| } |