| /* |
| * arch/arm/mach-at91/at91rm9200.c |
| * |
| * Copyright (C) 2005 SAN People |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <mach/at91rm9200.h> |
| #include <mach/at91_pmc.h> |
| #include <mach/at91_st.h> |
| #include <mach/cpu.h> |
| |
| #include "soc.h" |
| #include "generic.h" |
| #include "clock.h" |
| #include "sam9_smc.h" |
| |
| static struct map_desc at91rm9200_io_desc[] __initdata = { |
| { |
| .virtual = AT91_VA_BASE_EMAC, |
| .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), |
| .length = SZ_16K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk udc_clk = { |
| .name = "udc_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_UDP, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ohci_clk = { |
| .name = "ohci_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_UHP, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ether_clk = { |
| .name = "ether_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_EMAC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc_clk = { |
| .name = "mci_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_MCI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi_clk = { |
| .name = "twi_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TWI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_US0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_US1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_US2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart3_clk = { |
| .name = "usart3_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_US3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi_clk = { |
| .name = "spi_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_SPI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioA_clk = { |
| .name = "pioA_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_PIOA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioB_clk = { |
| .name = "pioB_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_PIOB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioC_clk = { |
| .name = "pioC_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_PIOC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioD_clk = { |
| .name = "pioD_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_PIOD, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc0_clk = { |
| .name = "ssc0_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_SSC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc1_clk = { |
| .name = "ssc1_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_SSC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc2_clk = { |
| .name = "ssc2_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_SSC2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc0_clk = { |
| .name = "tc0_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc1_clk = { |
| .name = "tc1_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc2_clk = { |
| .name = "tc2_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc3_clk = { |
| .name = "tc3_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc4_clk = { |
| .name = "tc4_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC4, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc5_clk = { |
| .name = "tc5_clk", |
| .pmc_mask = 1 << AT91RM9200_ID_TC5, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioA_clk, |
| &pioB_clk, |
| &pioC_clk, |
| &pioD_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &usart3_clk, |
| &mmc_clk, |
| &udc_clk, |
| &twi_clk, |
| &spi_clk, |
| &ssc0_clk, |
| &ssc1_clk, |
| &ssc2_clk, |
| &tc0_clk, |
| &tc1_clk, |
| &tc2_clk, |
| &tc3_clk, |
| &tc4_clk, |
| &tc5_clk, |
| &ohci_clk, |
| ðer_clk, |
| // irq0 .. irq6 |
| }; |
| |
| static struct clk_lookup periph_clocks_lookups[] = { |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), |
| CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), |
| CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), |
| CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), |
| /* fake hclk clock */ |
| CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), |
| CLKDEV_CON_ID("pioA", &pioA_clk), |
| CLKDEV_CON_ID("pioB", &pioB_clk), |
| CLKDEV_CON_ID("pioC", &pioC_clk), |
| CLKDEV_CON_ID("pioD", &pioD_clk), |
| }; |
| |
| static struct clk_lookup usart_clocks_lookups[] = { |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), |
| }; |
| |
| /* |
| * The four programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| static struct clk pck2 = { |
| .name = "pck2", |
| .pmc_mask = AT91_PMC_PCK2, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 2, |
| }; |
| static struct clk pck3 = { |
| .name = "pck3", |
| .pmc_mask = AT91_PMC_PCK3, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 3, |
| }; |
| |
| static void __init at91rm9200_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clkdev_add_table(periph_clocks_lookups, |
| ARRAY_SIZE(periph_clocks_lookups)); |
| clkdev_add_table(usart_clocks_lookups, |
| ARRAY_SIZE(usart_clocks_lookups)); |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| clk_register(&pck2); |
| clk_register(&pck3); |
| } |
| |
| static struct clk_lookup console_clock_lookup; |
| |
| void __init at91rm9200_set_console_clock(int id) |
| { |
| if (id >= ARRAY_SIZE(usart_clocks_lookups)) |
| return; |
| |
| console_clock_lookup.con_id = "usart"; |
| console_clock_lookup.clk = usart_clocks_lookups[id].clk; |
| clkdev_add(&console_clock_lookup); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * GPIO |
| * -------------------------------------------------------------------- */ |
| |
| static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { |
| { |
| .id = AT91RM9200_ID_PIOA, |
| .regbase = AT91RM9200_BASE_PIOA, |
| }, { |
| .id = AT91RM9200_ID_PIOB, |
| .regbase = AT91RM9200_BASE_PIOB, |
| }, { |
| .id = AT91RM9200_ID_PIOC, |
| .regbase = AT91RM9200_BASE_PIOC, |
| }, { |
| .id = AT91RM9200_ID_PIOD, |
| .regbase = AT91RM9200_BASE_PIOD, |
| } |
| }; |
| |
| static void at91rm9200_restart(char mode, const char *cmd) |
| { |
| /* |
| * Perform a hardware reset with the use of the Watchdog timer. |
| */ |
| at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); |
| at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * AT91RM9200 processor initialization |
| * -------------------------------------------------------------------- */ |
| static void __init at91rm9200_map_io(void) |
| { |
| /* Map peripherals */ |
| at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); |
| iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); |
| } |
| |
| static void __init at91rm9200_ioremap_registers(void) |
| { |
| } |
| |
| static void __init at91rm9200_initialize(void) |
| { |
| arm_pm_restart = at91rm9200_restart; |
| at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) |
| | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) |
| | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) |
| | (1 << AT91RM9200_ID_IRQ6); |
| |
| /* Initialize GPIO subsystem */ |
| at91_gpio_init(at91rm9200_gpio, |
| cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); |
| } |
| |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller (FIQ) */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A */ |
| 1, /* Parallel IO Controller B */ |
| 1, /* Parallel IO Controller C */ |
| 1, /* Parallel IO Controller D */ |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 5, /* USART 3 */ |
| 0, /* Multimedia Card Interface */ |
| 2, /* USB Device Port */ |
| 6, /* Two-Wire Interface */ |
| 5, /* Serial Peripheral Interface */ |
| 4, /* Serial Synchronous Controller 0 */ |
| 4, /* Serial Synchronous Controller 1 */ |
| 4, /* Serial Synchronous Controller 2 */ |
| 0, /* Timer Counter 0 */ |
| 0, /* Timer Counter 1 */ |
| 0, /* Timer Counter 2 */ |
| 0, /* Timer Counter 3 */ |
| 0, /* Timer Counter 4 */ |
| 0, /* Timer Counter 5 */ |
| 2, /* USB Host port */ |
| 3, /* Ethernet MAC */ |
| 0, /* Advanced Interrupt Controller (IRQ0) */ |
| 0, /* Advanced Interrupt Controller (IRQ1) */ |
| 0, /* Advanced Interrupt Controller (IRQ2) */ |
| 0, /* Advanced Interrupt Controller (IRQ3) */ |
| 0, /* Advanced Interrupt Controller (IRQ4) */ |
| 0, /* Advanced Interrupt Controller (IRQ5) */ |
| 0 /* Advanced Interrupt Controller (IRQ6) */ |
| }; |
| |
| struct at91_init_soc __initdata at91rm9200_soc = { |
| .map_io = at91rm9200_map_io, |
| .default_irq_priority = at91rm9200_default_irq_priority, |
| .ioremap_registers = at91rm9200_ioremap_registers, |
| .register_clocks = at91rm9200_register_clocks, |
| .init = at91rm9200_initialize, |
| }; |