| /* |
| * TTUSB DVB driver |
| * |
| * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> |
| * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/wait.h> |
| #include <linux/fs.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/delay.h> |
| #include <linux/time.h> |
| #include <linux/errno.h> |
| #include <linux/jiffies.h> |
| #include <linux/mutex.h> |
| #include <linux/firmware.h> |
| |
| #include "dvb_frontend.h" |
| #include "dmxdev.h" |
| #include "dvb_demux.h" |
| #include "dvb_net.h" |
| #include "ves1820.h" |
| #include "cx22700.h" |
| #include "tda1004x.h" |
| #include "stv0299.h" |
| #include "tda8083.h" |
| #include "stv0297.h" |
| #include "lnbp21.h" |
| |
| #include <linux/dvb/frontend.h> |
| #include <linux/dvb/dmx.h> |
| #include <linux/pci.h> |
| |
| /* |
| TTUSB_HWSECTIONS: |
| the DSP supports filtering in hardware, however, since the "muxstream" |
| is a bit braindead (no matching channel masks or no matching filter mask), |
| we won't support this - yet. it doesn't event support negative filters, |
| so the best way is maybe to keep TTUSB_HWSECTIONS undef'd and just |
| parse TS data. USB bandwidth will be a problem when having large |
| datastreams, especially for dvb-net, but hey, that's not my problem. |
| |
| TTUSB_DISEQC, TTUSB_TONE: |
| let the STC do the diseqc/tone stuff. this isn't supported at least with |
| my TTUSB, so let it undef'd unless you want to implement another |
| frontend. never tested. |
| |
| debug: |
| define it to > 3 for really hardcore debugging. you probably don't want |
| this unless the device doesn't load at all. > 2 for bandwidth statistics. |
| */ |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define dprintk(x...) do { if (debug) printk(KERN_DEBUG x); } while (0) |
| |
| #define ISO_BUF_COUNT 4 |
| #define FRAMES_PER_ISO_BUF 4 |
| #define ISO_FRAME_SIZE 912 |
| #define TTUSB_MAXCHANNEL 32 |
| #ifdef TTUSB_HWSECTIONS |
| #define TTUSB_MAXFILTER 16 /* ??? */ |
| #endif |
| |
| #define TTUSB_REV_2_2 0x22 |
| #define TTUSB_BUDGET_NAME "ttusb_stc_fw" |
| |
| /** |
| * since we're casting (struct ttusb*) <-> (struct dvb_demux*) around |
| * the dvb_demux field must be the first in struct!! |
| */ |
| struct ttusb { |
| struct dvb_demux dvb_demux; |
| struct dmxdev dmxdev; |
| struct dvb_net dvbnet; |
| |
| /* and one for USB access. */ |
| struct mutex semi2c; |
| struct mutex semusb; |
| |
| struct dvb_adapter adapter; |
| struct usb_device *dev; |
| |
| struct i2c_adapter i2c_adap; |
| |
| int disconnecting; |
| int iso_streaming; |
| |
| unsigned int bulk_out_pipe; |
| unsigned int bulk_in_pipe; |
| unsigned int isoc_in_pipe; |
| |
| void *iso_buffer; |
| dma_addr_t iso_dma_handle; |
| |
| struct urb *iso_urb[ISO_BUF_COUNT]; |
| |
| int running_feed_count; |
| int last_channel; |
| int last_filter; |
| |
| u8 c; /* transaction counter, wraps around... */ |
| fe_sec_tone_mode_t tone; |
| fe_sec_voltage_t voltage; |
| |
| int mux_state; // 0..2 - MuxSyncWord, 3 - nMuxPacks, 4 - muxpack |
| u8 mux_npacks; |
| u8 muxpack[256 + 8]; |
| int muxpack_ptr, muxpack_len; |
| |
| int insync; |
| |
| int cc; /* MuxCounter - will increment on EVERY MUX PACKET */ |
| /* (including stuffing. yes. really.) */ |
| |
| u8 last_result[32]; |
| |
| int revision; |
| |
| struct dvb_frontend* fe; |
| }; |
| |
| /* ugly workaround ... don't know why it's necessary to read */ |
| /* all result codes. */ |
| |
| static int ttusb_cmd(struct ttusb *ttusb, |
| const u8 * data, int len, int needresult) |
| { |
| int actual_len; |
| int err; |
| int i; |
| |
| if (debug >= 3) { |
| printk(KERN_DEBUG ">"); |
| for (i = 0; i < len; ++i) |
| printk(KERN_CONT " %02x", data[i]); |
| printk(KERN_CONT "\n"); |
| } |
| |
| if (mutex_lock_interruptible(&ttusb->semusb) < 0) |
| return -EAGAIN; |
| |
| err = usb_bulk_msg(ttusb->dev, ttusb->bulk_out_pipe, |
| (u8 *) data, len, &actual_len, 1000); |
| if (err != 0) { |
| dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n", |
| __func__, err); |
| mutex_unlock(&ttusb->semusb); |
| return err; |
| } |
| if (actual_len != len) { |
| dprintk("%s: only wrote %d of %d bytes\n", __func__, |
| actual_len, len); |
| mutex_unlock(&ttusb->semusb); |
| return -1; |
| } |
| |
| err = usb_bulk_msg(ttusb->dev, ttusb->bulk_in_pipe, |
| ttusb->last_result, 32, &actual_len, 1000); |
| |
| if (err != 0) { |
| printk("%s: failed, receive error %d\n", __func__, |
| err); |
| mutex_unlock(&ttusb->semusb); |
| return err; |
| } |
| |
| if (debug >= 3) { |
| actual_len = ttusb->last_result[3] + 4; |
| printk(KERN_DEBUG "<"); |
| for (i = 0; i < actual_len; ++i) |
| printk(KERN_CONT " %02x", ttusb->last_result[i]); |
| printk(KERN_CONT "\n"); |
| } |
| |
| if (!needresult) |
| mutex_unlock(&ttusb->semusb); |
| return 0; |
| } |
| |
| static int ttusb_result(struct ttusb *ttusb, u8 * data, int len) |
| { |
| memcpy(data, ttusb->last_result, len); |
| mutex_unlock(&ttusb->semusb); |
| return 0; |
| } |
| |
| static int ttusb_i2c_msg(struct ttusb *ttusb, |
| u8 addr, u8 * snd_buf, u8 snd_len, u8 * rcv_buf, |
| u8 rcv_len) |
| { |
| u8 b[0x28]; |
| u8 id = ++ttusb->c; |
| int i, err; |
| |
| if (snd_len > 0x28 - 7 || rcv_len > 0x20 - 7) |
| return -EINVAL; |
| |
| b[0] = 0xaa; |
| b[1] = id; |
| b[2] = 0x31; |
| b[3] = snd_len + 3; |
| b[4] = addr << 1; |
| b[5] = snd_len; |
| b[6] = rcv_len; |
| |
| for (i = 0; i < snd_len; i++) |
| b[7 + i] = snd_buf[i]; |
| |
| err = ttusb_cmd(ttusb, b, snd_len + 7, 1); |
| |
| if (err) |
| return -EREMOTEIO; |
| |
| err = ttusb_result(ttusb, b, 0x20); |
| |
| /* check if the i2c transaction was successful */ |
| if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO; |
| |
| if (rcv_len > 0) { |
| |
| if (err || b[0] != 0x55 || b[1] != id) { |
| dprintk |
| ("%s: usb_bulk_msg(recv) failed, err == %i, id == %02x, b == ", |
| __func__, err, id); |
| return -EREMOTEIO; |
| } |
| |
| for (i = 0; i < rcv_len; i++) |
| rcv_buf[i] = b[7 + i]; |
| } |
| |
| return rcv_len; |
| } |
| |
| static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num) |
| { |
| struct ttusb *ttusb = i2c_get_adapdata(adapter); |
| int i = 0; |
| int inc; |
| |
| if (mutex_lock_interruptible(&ttusb->semi2c) < 0) |
| return -EAGAIN; |
| |
| while (i < num) { |
| u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf; |
| int err; |
| |
| if (num > i + 1 && (msg[i + 1].flags & I2C_M_RD)) { |
| addr = msg[i].addr; |
| snd_buf = msg[i].buf; |
| snd_len = msg[i].len; |
| rcv_buf = msg[i + 1].buf; |
| rcv_len = msg[i + 1].len; |
| inc = 2; |
| } else { |
| addr = msg[i].addr; |
| snd_buf = msg[i].buf; |
| snd_len = msg[i].len; |
| rcv_buf = NULL; |
| rcv_len = 0; |
| inc = 1; |
| } |
| |
| err = ttusb_i2c_msg(ttusb, addr, |
| snd_buf, snd_len, rcv_buf, rcv_len); |
| |
| if (err < rcv_len) { |
| dprintk("%s: i == %i\n", __func__, i); |
| break; |
| } |
| |
| i += inc; |
| } |
| |
| mutex_unlock(&ttusb->semi2c); |
| return i; |
| } |
| |
| static int ttusb_boot_dsp(struct ttusb *ttusb) |
| { |
| const struct firmware *fw; |
| int i, err; |
| u8 b[40]; |
| |
| err = request_firmware(&fw, "ttusb-budget/dspbootcode.bin", |
| &ttusb->dev->dev); |
| if (err) { |
| printk(KERN_ERR "ttusb-budget: failed to request firmware\n"); |
| return err; |
| } |
| |
| /* BootBlock */ |
| b[0] = 0xaa; |
| b[2] = 0x13; |
| b[3] = 28; |
| |
| /* upload dsp code in 32 byte steps (36 didn't work for me ...) */ |
| /* 32 is max packet size, no messages should be splitted. */ |
| for (i = 0; i < fw->size; i += 28) { |
| memcpy(&b[4], &fw->data[i], 28); |
| |
| b[1] = ++ttusb->c; |
| |
| err = ttusb_cmd(ttusb, b, 32, 0); |
| if (err) |
| goto done; |
| } |
| |
| /* last block ... */ |
| b[1] = ++ttusb->c; |
| b[2] = 0x13; |
| b[3] = 0; |
| |
| err = ttusb_cmd(ttusb, b, 4, 0); |
| if (err) |
| goto done; |
| |
| /* BootEnd */ |
| b[1] = ++ttusb->c; |
| b[2] = 0x14; |
| b[3] = 0; |
| |
| err = ttusb_cmd(ttusb, b, 4, 0); |
| |
| done: |
| release_firmware(fw); |
| if (err) { |
| dprintk("%s: usb_bulk_msg() failed, return value %i!\n", |
| __func__, err); |
| } |
| |
| return err; |
| } |
| |
| static int ttusb_set_channel(struct ttusb *ttusb, int chan_id, int filter_type, |
| int pid) |
| { |
| int err; |
| /* SetChannel */ |
| u8 b[] = { 0xaa, ++ttusb->c, 0x22, 4, chan_id, filter_type, |
| (pid >> 8) & 0xff, pid & 0xff |
| }; |
| |
| err = ttusb_cmd(ttusb, b, sizeof(b), 0); |
| return err; |
| } |
| |
| static int ttusb_del_channel(struct ttusb *ttusb, int channel_id) |
| { |
| int err; |
| /* DelChannel */ |
| u8 b[] = { 0xaa, ++ttusb->c, 0x23, 1, channel_id }; |
| |
| err = ttusb_cmd(ttusb, b, sizeof(b), 0); |
| return err; |
| } |
| |
| #ifdef TTUSB_HWSECTIONS |
| static int ttusb_set_filter(struct ttusb *ttusb, int filter_id, |
| int associated_chan, u8 filter[8], u8 mask[8]) |
| { |
| int err; |
| /* SetFilter */ |
| u8 b[] = { 0xaa, 0, 0x24, 0x1a, filter_id, associated_chan, |
| filter[0], filter[1], filter[2], filter[3], |
| filter[4], filter[5], filter[6], filter[7], |
| filter[8], filter[9], filter[10], filter[11], |
| mask[0], mask[1], mask[2], mask[3], |
| mask[4], mask[5], mask[6], mask[7], |
| mask[8], mask[9], mask[10], mask[11] |
| }; |
| |
| err = ttusb_cmd(ttusb, b, sizeof(b), 0); |
| return err; |
| } |
| |
| static int ttusb_del_filter(struct ttusb *ttusb, int filter_id) |
| { |
| int err; |
| /* DelFilter */ |
| u8 b[] = { 0xaa, ++ttusb->c, 0x25, 1, filter_id }; |
| |
| err = ttusb_cmd(ttusb, b, sizeof(b), 0); |
| return err; |
| } |
| #endif |
| |
| static int ttusb_init_controller(struct ttusb *ttusb) |
| { |
| u8 b0[] = { 0xaa, ++ttusb->c, 0x15, 1, 0 }; |
| u8 b1[] = { 0xaa, ++ttusb->c, 0x15, 1, 1 }; |
| u8 b2[] = { 0xaa, ++ttusb->c, 0x32, 1, 0 }; |
| /* i2c write read: 5 bytes, addr 0x10, 0x02 bytes write, 1 bytes read. */ |
| u8 b3[] = |
| { 0xaa, ++ttusb->c, 0x31, 5, 0x10, 0x02, 0x01, 0x00, 0x1e }; |
| u8 b4[] = |
| { 0x55, ttusb->c, 0x31, 4, 0x10, 0x02, 0x01, 0x00, 0x1e }; |
| |
| u8 get_version[] = { 0xaa, ++ttusb->c, 0x17, 5, 0, 0, 0, 0, 0 }; |
| u8 get_dsp_version[0x20] = |
| { 0xaa, ++ttusb->c, 0x26, 28, 0, 0, 0, 0, 0 }; |
| int err; |
| |
| /* reset board */ |
| if ((err = ttusb_cmd(ttusb, b0, sizeof(b0), 0))) |
| return err; |
| |
| /* reset board (again?) */ |
| if ((err = ttusb_cmd(ttusb, b1, sizeof(b1), 0))) |
| return err; |
| |
| ttusb_boot_dsp(ttusb); |
| |
| /* set i2c bit rate */ |
| if ((err = ttusb_cmd(ttusb, b2, sizeof(b2), 0))) |
| return err; |
| |
| if ((err = ttusb_cmd(ttusb, b3, sizeof(b3), 1))) |
| return err; |
| |
| err = ttusb_result(ttusb, b4, sizeof(b4)); |
| |
| if ((err = ttusb_cmd(ttusb, get_version, sizeof(get_version), 1))) |
| return err; |
| |
| if ((err = ttusb_result(ttusb, get_version, sizeof(get_version)))) |
| return err; |
| |
| dprintk("%s: stc-version: %c%c%c%c%c\n", __func__, |
| get_version[4], get_version[5], get_version[6], |
| get_version[7], get_version[8]); |
| |
| if (memcmp(get_version + 4, "V 0.0", 5) && |
| memcmp(get_version + 4, "V 1.1", 5) && |
| memcmp(get_version + 4, "V 2.1", 5) && |
| memcmp(get_version + 4, "V 2.2", 5)) { |
| printk |
| ("%s: unknown STC version %c%c%c%c%c, please report!\n", |
| __func__, get_version[4], get_version[5], |
| get_version[6], get_version[7], get_version[8]); |
| } |
| |
| ttusb->revision = ((get_version[6] - '0') << 4) | |
| (get_version[8] - '0'); |
| |
| err = |
| ttusb_cmd(ttusb, get_dsp_version, sizeof(get_dsp_version), 1); |
| if (err) |
| return err; |
| |
| err = |
| ttusb_result(ttusb, get_dsp_version, sizeof(get_dsp_version)); |
| if (err) |
| return err; |
| printk("%s: dsp-version: %c%c%c\n", __func__, |
| get_dsp_version[4], get_dsp_version[5], get_dsp_version[6]); |
| return 0; |
| } |
| |
| #ifdef TTUSB_DISEQC |
| static int ttusb_send_diseqc(struct dvb_frontend* fe, |
| const struct dvb_diseqc_master_cmd *cmd) |
| { |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| u8 b[12] = { 0xaa, ++ttusb->c, 0x18 }; |
| |
| int err; |
| |
| b[3] = 4 + 2 + cmd->msg_len; |
| b[4] = 0xFF; /* send diseqc master, not burst */ |
| b[5] = cmd->msg_len; |
| |
| memcpy(b + 5, cmd->msg, cmd->msg_len); |
| |
| /* Diseqc */ |
| if ((err = ttusb_cmd(ttusb, b, 4 + b[3], 0))) { |
| dprintk("%s: usb_bulk_msg() failed, return value %i!\n", |
| __func__, err); |
| } |
| |
| return err; |
| } |
| #endif |
| |
| static int ttusb_update_lnb(struct ttusb *ttusb) |
| { |
| u8 b[] = { 0xaa, ++ttusb->c, 0x16, 5, /*power: */ 1, |
| ttusb->voltage == SEC_VOLTAGE_18 ? 0 : 1, |
| ttusb->tone == SEC_TONE_ON ? 1 : 0, 1, 1 |
| }; |
| int err; |
| |
| /* SetLNB */ |
| if ((err = ttusb_cmd(ttusb, b, sizeof(b), 0))) { |
| dprintk("%s: usb_bulk_msg() failed, return value %i!\n", |
| __func__, err); |
| } |
| |
| return err; |
| } |
| |
| static int ttusb_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| { |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| |
| ttusb->voltage = voltage; |
| return ttusb_update_lnb(ttusb); |
| } |
| |
| #ifdef TTUSB_TONE |
| static int ttusb_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| { |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| |
| ttusb->tone = tone; |
| return ttusb_update_lnb(ttusb); |
| } |
| #endif |
| |
| |
| #if 0 |
| static void ttusb_set_led_freq(struct ttusb *ttusb, u8 freq) |
| { |
| u8 b[] = { 0xaa, ++ttusb->c, 0x19, 1, freq }; |
| int err, actual_len; |
| |
| err = ttusb_cmd(ttusb, b, sizeof(b), 0); |
| if (err) { |
| dprintk("%s: usb_bulk_msg() failed, return value %i!\n", |
| __func__, err); |
| } |
| } |
| #endif |
| |
| /*****************************************************************************/ |
| |
| #ifdef TTUSB_HWSECTIONS |
| static void ttusb_handle_ts_data(struct ttusb_channel *channel, |
| const u8 * data, int len); |
| static void ttusb_handle_sec_data(struct ttusb_channel *channel, |
| const u8 * data, int len); |
| #endif |
| |
| static int numpkt, numts, numstuff, numsec, numinvalid; |
| static unsigned long lastj; |
| |
| static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, |
| int len) |
| { |
| u16 csum = 0, cc; |
| int i; |
| for (i = 0; i < len; i += 2) |
| csum ^= le16_to_cpup((__le16 *) (muxpack + i)); |
| if (csum) { |
| printk("%s: muxpack with incorrect checksum, ignoring\n", |
| __func__); |
| numinvalid++; |
| return; |
| } |
| |
| cc = (muxpack[len - 4] << 8) | muxpack[len - 3]; |
| cc &= 0x7FFF; |
| if ((cc != ttusb->cc) && (ttusb->cc != -1)) |
| printk("%s: cc discontinuity (%d frames missing)\n", |
| __func__, (cc - ttusb->cc) & 0x7FFF); |
| ttusb->cc = (cc + 1) & 0x7FFF; |
| if (muxpack[0] & 0x80) { |
| #ifdef TTUSB_HWSECTIONS |
| /* section data */ |
| int pusi = muxpack[0] & 0x40; |
| int channel = muxpack[0] & 0x1F; |
| int payload = muxpack[1]; |
| const u8 *data = muxpack + 2; |
| /* check offset flag */ |
| if (muxpack[0] & 0x20) |
| data++; |
| |
| ttusb_handle_sec_data(ttusb->channel + channel, data, |
| payload); |
| data += payload; |
| |
| if ((!!(ttusb->muxpack[0] & 0x20)) ^ |
| !!(ttusb->muxpack[1] & 1)) |
| data++; |
| #warning TODO: pusi |
| printk("cc: %04x\n", (data[0] << 8) | data[1]); |
| #endif |
| numsec++; |
| } else if (muxpack[0] == 0x47) { |
| #ifdef TTUSB_HWSECTIONS |
| /* we have TS data here! */ |
| int pid = ((muxpack[1] & 0x0F) << 8) | muxpack[2]; |
| int channel; |
| for (channel = 0; channel < TTUSB_MAXCHANNEL; ++channel) |
| if (ttusb->channel[channel].active |
| && (pid == ttusb->channel[channel].pid)) |
| ttusb_handle_ts_data(ttusb->channel + |
| channel, muxpack, |
| 188); |
| #endif |
| numts++; |
| dvb_dmx_swfilter_packets(&ttusb->dvb_demux, muxpack, 1); |
| } else if (muxpack[0] != 0) { |
| numinvalid++; |
| printk("illegal muxpack type %02x\n", muxpack[0]); |
| } else |
| numstuff++; |
| } |
| |
| static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) |
| { |
| int maxwork = 1024; |
| while (len) { |
| if (!(maxwork--)) { |
| printk("%s: too much work\n", __func__); |
| break; |
| } |
| |
| switch (ttusb->mux_state) { |
| case 0: |
| case 1: |
| case 2: |
| len--; |
| if (*data++ == 0xAA) |
| ++ttusb->mux_state; |
| else { |
| ttusb->mux_state = 0; |
| if (ttusb->insync) { |
| dprintk("%s: %02x\n", |
| __func__, data[-1]); |
| printk(KERN_INFO "%s: lost sync.\n", |
| __func__); |
| ttusb->insync = 0; |
| } |
| } |
| break; |
| case 3: |
| ttusb->insync = 1; |
| len--; |
| ttusb->mux_npacks = *data++; |
| ++ttusb->mux_state; |
| ttusb->muxpack_ptr = 0; |
| /* maximum bytes, until we know the length */ |
| ttusb->muxpack_len = 2; |
| break; |
| case 4: |
| { |
| int avail; |
| avail = len; |
| if (avail > |
| (ttusb->muxpack_len - |
| ttusb->muxpack_ptr)) |
| avail = |
| ttusb->muxpack_len - |
| ttusb->muxpack_ptr; |
| memcpy(ttusb->muxpack + ttusb->muxpack_ptr, |
| data, avail); |
| ttusb->muxpack_ptr += avail; |
| BUG_ON(ttusb->muxpack_ptr > 264); |
| data += avail; |
| len -= avail; |
| /* determine length */ |
| if (ttusb->muxpack_ptr == 2) { |
| if (ttusb->muxpack[0] & 0x80) { |
| ttusb->muxpack_len = |
| ttusb->muxpack[1] + 2; |
| if (ttusb-> |
| muxpack[0] & 0x20) |
| ttusb-> |
| muxpack_len++; |
| if ((!! |
| (ttusb-> |
| muxpack[0] & 0x20)) ^ |
| !!(ttusb-> |
| muxpack[1] & 1)) |
| ttusb-> |
| muxpack_len++; |
| ttusb->muxpack_len += 4; |
| } else if (ttusb->muxpack[0] == |
| 0x47) |
| ttusb->muxpack_len = |
| 188 + 4; |
| else if (ttusb->muxpack[0] == 0x00) |
| ttusb->muxpack_len = |
| ttusb->muxpack[1] + 2 + |
| 4; |
| else { |
| dprintk |
| ("%s: invalid state: first byte is %x\n", |
| __func__, |
| ttusb->muxpack[0]); |
| ttusb->mux_state = 0; |
| } |
| } |
| |
| /** |
| * if length is valid and we reached the end: |
| * goto next muxpack |
| */ |
| if ((ttusb->muxpack_ptr >= 2) && |
| (ttusb->muxpack_ptr == |
| ttusb->muxpack_len)) { |
| ttusb_process_muxpack(ttusb, |
| ttusb-> |
| muxpack, |
| ttusb-> |
| muxpack_ptr); |
| ttusb->muxpack_ptr = 0; |
| /* maximum bytes, until we know the length */ |
| ttusb->muxpack_len = 2; |
| |
| /** |
| * no muxpacks left? |
| * return to search-sync state |
| */ |
| if (!ttusb->mux_npacks--) { |
| ttusb->mux_state = 0; |
| break; |
| } |
| } |
| break; |
| } |
| default: |
| BUG(); |
| break; |
| } |
| } |
| } |
| |
| static void ttusb_iso_irq(struct urb *urb) |
| { |
| struct ttusb *ttusb = urb->context; |
| struct usb_iso_packet_descriptor *d; |
| u8 *data; |
| int len, i; |
| |
| if (!ttusb->iso_streaming) |
| return; |
| |
| #if 0 |
| printk("%s: status %d, errcount == %d, length == %i\n", |
| __func__, |
| urb->status, urb->error_count, urb->actual_length); |
| #endif |
| |
| if (!urb->status) { |
| for (i = 0; i < urb->number_of_packets; ++i) { |
| numpkt++; |
| if (time_after_eq(jiffies, lastj + HZ)) { |
| dprintk("frames/s: %lu (ts: %d, stuff %d, " |
| "sec: %d, invalid: %d, all: %d)\n", |
| numpkt * HZ / (jiffies - lastj), |
| numts, numstuff, numsec, numinvalid, |
| numts + numstuff + numsec + numinvalid); |
| numts = numstuff = numsec = numinvalid = 0; |
| lastj = jiffies; |
| numpkt = 0; |
| } |
| d = &urb->iso_frame_desc[i]; |
| data = urb->transfer_buffer + d->offset; |
| len = d->actual_length; |
| d->actual_length = 0; |
| d->status = 0; |
| ttusb_process_frame(ttusb, data, len); |
| } |
| } |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static void ttusb_free_iso_urbs(struct ttusb *ttusb) |
| { |
| int i; |
| |
| for (i = 0; i < ISO_BUF_COUNT; i++) |
| if (ttusb->iso_urb[i]) |
| usb_free_urb(ttusb->iso_urb[i]); |
| |
| pci_free_consistent(NULL, |
| ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * |
| ISO_BUF_COUNT, ttusb->iso_buffer, |
| ttusb->iso_dma_handle); |
| } |
| |
| static int ttusb_alloc_iso_urbs(struct ttusb *ttusb) |
| { |
| int i; |
| |
| ttusb->iso_buffer = pci_alloc_consistent(NULL, |
| ISO_FRAME_SIZE * |
| FRAMES_PER_ISO_BUF * |
| ISO_BUF_COUNT, |
| &ttusb->iso_dma_handle); |
| |
| if (!ttusb->iso_buffer) { |
| dprintk("%s: pci_alloc_consistent - not enough memory\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| memset(ttusb->iso_buffer, 0, |
| ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT); |
| |
| for (i = 0; i < ISO_BUF_COUNT; i++) { |
| struct urb *urb; |
| |
| if (! |
| (urb = |
| usb_alloc_urb(FRAMES_PER_ISO_BUF, GFP_ATOMIC))) { |
| ttusb_free_iso_urbs(ttusb); |
| return -ENOMEM; |
| } |
| |
| ttusb->iso_urb[i] = urb; |
| } |
| |
| return 0; |
| } |
| |
| static void ttusb_stop_iso_xfer(struct ttusb *ttusb) |
| { |
| int i; |
| |
| for (i = 0; i < ISO_BUF_COUNT; i++) |
| usb_kill_urb(ttusb->iso_urb[i]); |
| |
| ttusb->iso_streaming = 0; |
| } |
| |
| static int ttusb_start_iso_xfer(struct ttusb *ttusb) |
| { |
| int i, j, err, buffer_offset = 0; |
| |
| if (ttusb->iso_streaming) { |
| printk("%s: iso xfer already running!\n", __func__); |
| return 0; |
| } |
| |
| ttusb->cc = -1; |
| ttusb->insync = 0; |
| ttusb->mux_state = 0; |
| |
| for (i = 0; i < ISO_BUF_COUNT; i++) { |
| int frame_offset = 0; |
| struct urb *urb = ttusb->iso_urb[i]; |
| |
| urb->dev = ttusb->dev; |
| urb->context = ttusb; |
| urb->complete = ttusb_iso_irq; |
| urb->pipe = ttusb->isoc_in_pipe; |
| urb->transfer_flags = URB_ISO_ASAP; |
| urb->interval = 1; |
| urb->number_of_packets = FRAMES_PER_ISO_BUF; |
| urb->transfer_buffer_length = |
| ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF; |
| urb->transfer_buffer = ttusb->iso_buffer + buffer_offset; |
| buffer_offset += ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF; |
| |
| for (j = 0; j < FRAMES_PER_ISO_BUF; j++) { |
| urb->iso_frame_desc[j].offset = frame_offset; |
| urb->iso_frame_desc[j].length = ISO_FRAME_SIZE; |
| frame_offset += ISO_FRAME_SIZE; |
| } |
| } |
| |
| for (i = 0; i < ISO_BUF_COUNT; i++) { |
| if ((err = usb_submit_urb(ttusb->iso_urb[i], GFP_ATOMIC))) { |
| ttusb_stop_iso_xfer(ttusb); |
| printk |
| ("%s: failed urb submission (%i: err = %i)!\n", |
| __func__, i, err); |
| return err; |
| } |
| } |
| |
| ttusb->iso_streaming = 1; |
| |
| return 0; |
| } |
| |
| #ifdef TTUSB_HWSECTIONS |
| static void ttusb_handle_ts_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data, |
| int len) |
| { |
| dvbdmxfeed->cb.ts(data, len, 0, 0, &dvbdmxfeed->feed.ts, 0); |
| } |
| |
| static void ttusb_handle_sec_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data, |
| int len) |
| { |
| // struct dvb_demux_feed *dvbdmxfeed = channel->dvbdmxfeed; |
| #error TODO: handle ugly stuff |
| // dvbdmxfeed->cb.sec(data, len, 0, 0, &dvbdmxfeed->feed.sec, 0); |
| } |
| #endif |
| |
| static int ttusb_start_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux; |
| int feed_type = 1; |
| |
| dprintk("ttusb_start_feed\n"); |
| |
| switch (dvbdmxfeed->type) { |
| case DMX_TYPE_TS: |
| break; |
| case DMX_TYPE_SEC: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (dvbdmxfeed->type == DMX_TYPE_TS) { |
| switch (dvbdmxfeed->pes_type) { |
| case DMX_TS_PES_VIDEO: |
| case DMX_TS_PES_AUDIO: |
| case DMX_TS_PES_TELETEXT: |
| case DMX_TS_PES_PCR: |
| case DMX_TS_PES_OTHER: |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| #ifdef TTUSB_HWSECTIONS |
| #error TODO: allocate filters |
| if (dvbdmxfeed->type == DMX_TYPE_TS) { |
| feed_type = 1; |
| } else if (dvbdmxfeed->type == DMX_TYPE_SEC) { |
| feed_type = 2; |
| } |
| #endif |
| |
| ttusb_set_channel(ttusb, dvbdmxfeed->index, feed_type, dvbdmxfeed->pid); |
| |
| if (0 == ttusb->running_feed_count++) |
| ttusb_start_iso_xfer(ttusb); |
| |
| return 0; |
| } |
| |
| static int ttusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux; |
| |
| ttusb_del_channel(ttusb, dvbdmxfeed->index); |
| |
| if (--ttusb->running_feed_count == 0) |
| ttusb_stop_iso_xfer(ttusb); |
| |
| return 0; |
| } |
| |
| static int ttusb_setup_interfaces(struct ttusb *ttusb) |
| { |
| usb_set_interface(ttusb->dev, 1, 1); |
| |
| ttusb->bulk_out_pipe = usb_sndbulkpipe(ttusb->dev, 1); |
| ttusb->bulk_in_pipe = usb_rcvbulkpipe(ttusb->dev, 1); |
| ttusb->isoc_in_pipe = usb_rcvisocpipe(ttusb->dev, 2); |
| |
| return 0; |
| } |
| |
| #if 0 |
| static u8 stc_firmware[8192]; |
| |
| static int stc_open(struct inode *inode, struct file *file) |
| { |
| struct ttusb *ttusb = file->private_data; |
| int addr; |
| |
| for (addr = 0; addr < 8192; addr += 16) { |
| u8 snd_buf[2] = { addr >> 8, addr & 0xFF }; |
| ttusb_i2c_msg(ttusb, 0x50, snd_buf, 2, stc_firmware + addr, |
| 16); |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t stc_read(struct file *file, char *buf, size_t count, |
| loff_t *offset) |
| { |
| return simple_read_from_buffer(buf, count, offset, stc_firmware, 8192); |
| } |
| |
| static int stc_release(struct inode *inode, struct file *file) |
| { |
| return 0; |
| } |
| |
| static const struct file_operations stc_fops = { |
| .owner = THIS_MODULE, |
| .read = stc_read, |
| .open = stc_open, |
| .release = stc_release, |
| }; |
| #endif |
| |
| static u32 functionality(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| |
| |
| static int alps_tdmb7_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| u8 data[4]; |
| struct i2c_msg msg = {.addr=0x61, .flags=0, .buf=data, .len=sizeof(data) }; |
| u32 div; |
| |
| div = (p->frequency + 36166667) / 166667; |
| |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = ((div >> 10) & 0x60) | 0x85; |
| data[3] = p->frequency < 592000000 ? 0x40 : 0x80; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; |
| return 0; |
| } |
| |
| static struct cx22700_config alps_tdmb7_config = { |
| .demod_address = 0x43, |
| }; |
| |
| |
| |
| |
| |
| static int philips_tdm1316l_tuner_init(struct dvb_frontend* fe) |
| { |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; |
| static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; |
| struct i2c_msg tuner_msg = { .addr=0x60, .flags=0, .buf=td1316_init, .len=sizeof(td1316_init) }; |
| |
| // setup PLL configuration |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO; |
| msleep(1); |
| |
| // disable the mc44BC374c (do not check for errors) |
| tuner_msg.addr = 0x65; |
| tuner_msg.buf = disable_mc44BC374c; |
| tuner_msg.len = sizeof(disable_mc44BC374c); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { |
| i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1); |
| } |
| |
| return 0; |
| } |
| |
| static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| u8 tuner_buf[4]; |
| struct i2c_msg tuner_msg = {.addr=0x60, .flags=0, .buf=tuner_buf, .len=sizeof(tuner_buf) }; |
| int tuner_frequency = 0; |
| u8 band, cp, filter; |
| |
| // determine charge pump |
| tuner_frequency = p->frequency + 36130000; |
| if (tuner_frequency < 87000000) return -EINVAL; |
| else if (tuner_frequency < 130000000) cp = 3; |
| else if (tuner_frequency < 160000000) cp = 5; |
| else if (tuner_frequency < 200000000) cp = 6; |
| else if (tuner_frequency < 290000000) cp = 3; |
| else if (tuner_frequency < 420000000) cp = 5; |
| else if (tuner_frequency < 480000000) cp = 6; |
| else if (tuner_frequency < 620000000) cp = 3; |
| else if (tuner_frequency < 830000000) cp = 5; |
| else if (tuner_frequency < 895000000) cp = 7; |
| else return -EINVAL; |
| |
| // determine band |
| if (p->frequency < 49000000) |
| return -EINVAL; |
| else if (p->frequency < 159000000) |
| band = 1; |
| else if (p->frequency < 444000000) |
| band = 2; |
| else if (p->frequency < 861000000) |
| band = 4; |
| else return -EINVAL; |
| |
| // setup PLL filter |
| switch (p->bandwidth_hz) { |
| case 6000000: |
| tda1004x_writereg(fe, 0x0C, 0); |
| filter = 0; |
| break; |
| |
| case 7000000: |
| tda1004x_writereg(fe, 0x0C, 0); |
| filter = 0; |
| break; |
| |
| case 8000000: |
| tda1004x_writereg(fe, 0x0C, 0xFF); |
| filter = 1; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| // calculate divisor |
| // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) |
| tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; |
| |
| // setup tuner buffer |
| tuner_buf[0] = tuner_frequency >> 8; |
| tuner_buf[1] = tuner_frequency & 0xff; |
| tuner_buf[2] = 0xca; |
| tuner_buf[3] = (cp << 5) | (filter << 3) | band; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) |
| return -EIO; |
| |
| msleep(1); |
| return 0; |
| } |
| |
| static int philips_tdm1316l_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) |
| { |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| |
| return request_firmware(fw, name, &ttusb->dev->dev); |
| } |
| |
| static struct tda1004x_config philips_tdm1316l_config = { |
| |
| .demod_address = 0x8, |
| .invert = 1, |
| .invert_oclk = 0, |
| .request_firmware = philips_tdm1316l_request_firmware, |
| }; |
| |
| static u8 alps_bsbe1_inittab[] = { |
| 0x01, 0x15, |
| 0x02, 0x30, |
| 0x03, 0x00, |
| 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ |
| 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ |
| 0x06, 0x40, /* DAC not used, set to high impendance mode */ |
| 0x07, 0x00, /* DAC LSB */ |
| 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ |
| 0x09, 0x00, /* FIFO */ |
| 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ |
| 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ |
| 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ |
| 0x10, 0x3f, // AGC2 0x3d |
| 0x11, 0x84, |
| 0x12, 0xb9, |
| 0x15, 0xc9, // lock detector threshold |
| 0x16, 0x00, |
| 0x17, 0x00, |
| 0x18, 0x00, |
| 0x19, 0x00, |
| 0x1a, 0x00, |
| 0x1f, 0x50, |
| 0x20, 0x00, |
| 0x21, 0x00, |
| 0x22, 0x00, |
| 0x23, 0x00, |
| 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 |
| 0x29, 0x1e, // 1/2 threshold |
| 0x2a, 0x14, // 2/3 threshold |
| 0x2b, 0x0f, // 3/4 threshold |
| 0x2c, 0x09, // 5/6 threshold |
| 0x2d, 0x05, // 7/8 threshold |
| 0x2e, 0x01, |
| 0x31, 0x1f, // test all FECs |
| 0x32, 0x19, // viterbi and synchro search |
| 0x33, 0xfc, // rs control |
| 0x34, 0x93, // error control |
| 0x0f, 0x92, |
| 0xff, 0xff |
| }; |
| |
| static u8 alps_bsru6_inittab[] = { |
| 0x01, 0x15, |
| 0x02, 0x30, |
| 0x03, 0x00, |
| 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ |
| 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ |
| 0x06, 0x40, /* DAC not used, set to high impendance mode */ |
| 0x07, 0x00, /* DAC LSB */ |
| 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ |
| 0x09, 0x00, /* FIFO */ |
| 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ |
| 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ |
| 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ |
| 0x10, 0x3f, // AGC2 0x3d |
| 0x11, 0x84, |
| 0x12, 0xb9, |
| 0x15, 0xc9, // lock detector threshold |
| 0x16, 0x00, |
| 0x17, 0x00, |
| 0x18, 0x00, |
| 0x19, 0x00, |
| 0x1a, 0x00, |
| 0x1f, 0x50, |
| 0x20, 0x00, |
| 0x21, 0x00, |
| 0x22, 0x00, |
| 0x23, 0x00, |
| 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 |
| 0x29, 0x1e, // 1/2 threshold |
| 0x2a, 0x14, // 2/3 threshold |
| 0x2b, 0x0f, // 3/4 threshold |
| 0x2c, 0x09, // 5/6 threshold |
| 0x2d, 0x05, // 7/8 threshold |
| 0x2e, 0x01, |
| 0x31, 0x1f, // test all FECs |
| 0x32, 0x19, // viterbi and synchro search |
| 0x33, 0xfc, // rs control |
| 0x34, 0x93, // error control |
| 0x0f, 0x52, |
| 0xff, 0xff |
| }; |
| |
| static int alps_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) |
| { |
| u8 aclk = 0; |
| u8 bclk = 0; |
| |
| if (srate < 1500000) { |
| aclk = 0xb7; |
| bclk = 0x47; |
| } else if (srate < 3000000) { |
| aclk = 0xb7; |
| bclk = 0x4b; |
| } else if (srate < 7000000) { |
| aclk = 0xb7; |
| bclk = 0x4f; |
| } else if (srate < 14000000) { |
| aclk = 0xb7; |
| bclk = 0x53; |
| } else if (srate < 30000000) { |
| aclk = 0xb6; |
| bclk = 0x53; |
| } else if (srate < 45000000) { |
| aclk = 0xb4; |
| bclk = 0x51; |
| } |
| |
| stv0299_writereg(fe, 0x13, aclk); |
| stv0299_writereg(fe, 0x14, bclk); |
| stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); |
| stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); |
| stv0299_writereg(fe, 0x21, (ratio) & 0xf0); |
| |
| return 0; |
| } |
| |
| static int philips_tsa5059_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; |
| |
| if ((p->frequency < 950000) || (p->frequency > 2150000)) |
| return -EINVAL; |
| |
| div = (p->frequency + (125 - 1)) / 125; /* round correctly */ |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; |
| buf[3] = 0xC4; |
| |
| if (p->frequency > 1530000) |
| buf[3] = 0xC0; |
| |
| /* BSBE1 wants XCE bit set */ |
| if (ttusb->revision == TTUSB_REV_2_2) |
| buf[3] |= 0x20; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static struct stv0299_config alps_stv0299_config = { |
| .demod_address = 0x68, |
| .inittab = alps_bsru6_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .skip_reinit = 0, |
| .lock_output = STV0299_LOCKOUTPUT_1, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = alps_stv0299_set_symbol_rate, |
| }; |
| |
| static int ttusb_novas_grundig_29504_491_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; |
| u8 buf[4]; |
| u32 div; |
| struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; |
| |
| div = p->frequency / 125; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = 0x8e; |
| buf[3] = 0x00; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static struct tda8083_config ttusb_novas_grundig_29504_491_config = { |
| |
| .demod_address = 0x68, |
| }; |
| |
| static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb* ttusb = fe->dvb->priv; |
| u32 div; |
| u8 data[4]; |
| struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; |
| |
| div = (p->frequency + 35937500 + 31250) / 62500; |
| |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = 0x85 | ((div >> 10) & 0x60); |
| data[3] = (p->frequency < 174000000 ? 0x88 : p->frequency < 470000000 ? 0x84 : 0x81); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&ttusb->i2c_adap, &msg, 1) != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| |
| static struct ves1820_config alps_tdbe2_config = { |
| .demod_address = 0x09, |
| .xin = 57840000UL, |
| .invert = 1, |
| .selagc = VES1820_SELAGC_SIGNAMPERR, |
| }; |
| |
| static u8 read_pwm(struct ttusb* ttusb) |
| { |
| u8 b = 0xff; |
| u8 pwm; |
| struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, |
| { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; |
| |
| if ((i2c_transfer(&ttusb->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) |
| pwm = 0x48; |
| |
| return pwm; |
| } |
| |
| |
| static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv; |
| u8 tuner_buf[5]; |
| struct i2c_msg tuner_msg = {.addr = 0x60, |
| .flags = 0, |
| .buf = tuner_buf, |
| .len = sizeof(tuner_buf) }; |
| int tuner_frequency = 0; |
| u8 band, cp, filter; |
| |
| // determine charge pump |
| tuner_frequency = p->frequency; |
| if (tuner_frequency < 87000000) {return -EINVAL;} |
| else if (tuner_frequency < 130000000) {cp = 3; band = 1;} |
| else if (tuner_frequency < 160000000) {cp = 5; band = 1;} |
| else if (tuner_frequency < 200000000) {cp = 6; band = 1;} |
| else if (tuner_frequency < 290000000) {cp = 3; band = 2;} |
| else if (tuner_frequency < 420000000) {cp = 5; band = 2;} |
| else if (tuner_frequency < 480000000) {cp = 6; band = 2;} |
| else if (tuner_frequency < 620000000) {cp = 3; band = 4;} |
| else if (tuner_frequency < 830000000) {cp = 5; band = 4;} |
| else if (tuner_frequency < 895000000) {cp = 7; band = 4;} |
| else {return -EINVAL;} |
| |
| // assume PLL filter should always be 8MHz for the moment. |
| filter = 1; |
| |
| // calculate divisor |
| // (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz |
| tuner_frequency = ((p->frequency + 36125000) / 62500); |
| |
| // setup tuner buffer |
| tuner_buf[0] = tuner_frequency >> 8; |
| tuner_buf[1] = tuner_frequency & 0xff; |
| tuner_buf[2] = 0xc8; |
| tuner_buf[3] = (cp << 5) | (filter << 3) | band; |
| tuner_buf[4] = 0x80; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { |
| printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n"); |
| return -EIO; |
| } |
| |
| msleep(50); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { |
| printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n"); |
| return -EIO; |
| } |
| |
| msleep(1); |
| |
| return 0; |
| } |
| |
| static u8 dvbc_philips_tdm1316l_inittab[] = { |
| 0x80, 0x21, |
| 0x80, 0x20, |
| 0x81, 0x01, |
| 0x81, 0x00, |
| 0x00, 0x09, |
| 0x01, 0x69, |
| 0x03, 0x00, |
| 0x04, 0x00, |
| 0x07, 0x00, |
| 0x08, 0x00, |
| 0x20, 0x00, |
| 0x21, 0x40, |
| 0x22, 0x00, |
| 0x23, 0x00, |
| 0x24, 0x40, |
| 0x25, 0x88, |
| 0x30, 0xff, |
| 0x31, 0x00, |
| 0x32, 0xff, |
| 0x33, 0x00, |
| 0x34, 0x50, |
| 0x35, 0x7f, |
| 0x36, 0x00, |
| 0x37, 0x20, |
| 0x38, 0x00, |
| 0x40, 0x1c, |
| 0x41, 0xff, |
| 0x42, 0x29, |
| 0x43, 0x20, |
| 0x44, 0xff, |
| 0x45, 0x00, |
| 0x46, 0x00, |
| 0x49, 0x04, |
| 0x4a, 0xff, |
| 0x4b, 0x7f, |
| 0x52, 0x30, |
| 0x55, 0xae, |
| 0x56, 0x47, |
| 0x57, 0xe1, |
| 0x58, 0x3a, |
| 0x5a, 0x1e, |
| 0x5b, 0x34, |
| 0x60, 0x00, |
| 0x63, 0x00, |
| 0x64, 0x00, |
| 0x65, 0x00, |
| 0x66, 0x00, |
| 0x67, 0x00, |
| 0x68, 0x00, |
| 0x69, 0x00, |
| 0x6a, 0x02, |
| 0x6b, 0x00, |
| 0x70, 0xff, |
| 0x71, 0x00, |
| 0x72, 0x00, |
| 0x73, 0x00, |
| 0x74, 0x0c, |
| 0x80, 0x00, |
| 0x81, 0x00, |
| 0x82, 0x00, |
| 0x83, 0x00, |
| 0x84, 0x04, |
| 0x85, 0x80, |
| 0x86, 0x24, |
| 0x87, 0x78, |
| 0x88, 0x00, |
| 0x89, 0x00, |
| 0x90, 0x01, |
| 0x91, 0x01, |
| 0xa0, 0x00, |
| 0xa1, 0x00, |
| 0xa2, 0x00, |
| 0xb0, 0x91, |
| 0xb1, 0x0b, |
| 0xc0, 0x4b, |
| 0xc1, 0x00, |
| 0xc2, 0x00, |
| 0xd0, 0x00, |
| 0xd1, 0x00, |
| 0xd2, 0x00, |
| 0xd3, 0x00, |
| 0xd4, 0x00, |
| 0xd5, 0x00, |
| 0xde, 0x00, |
| 0xdf, 0x00, |
| 0x61, 0x38, |
| 0x62, 0x0a, |
| 0x53, 0x13, |
| 0x59, 0x08, |
| 0x55, 0x00, |
| 0x56, 0x40, |
| 0x57, 0x08, |
| 0x58, 0x3d, |
| 0x88, 0x10, |
| 0xa0, 0x00, |
| 0xa0, 0x00, |
| 0xa0, 0x00, |
| 0xa0, 0x04, |
| 0xff, 0xff, |
| }; |
| |
| static struct stv0297_config dvbc_philips_tdm1316l_config = { |
| .demod_address = 0x1c, |
| .inittab = dvbc_philips_tdm1316l_inittab, |
| .invert = 0, |
| }; |
| |
| static void frontend_init(struct ttusb* ttusb) |
| { |
| switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) { |
| case 0x1003: // Hauppauge/TT Nova-USB-S budget (stv0299/ALPS BSRU6|BSBE1(tsa5059)) |
| // try the stv0299 based first |
| ttusb->fe = dvb_attach(stv0299_attach, &alps_stv0299_config, &ttusb->i2c_adap); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.set_params = philips_tsa5059_tuner_set_params; |
| |
| if(ttusb->revision == TTUSB_REV_2_2) { // ALPS BSBE1 |
| alps_stv0299_config.inittab = alps_bsbe1_inittab; |
| dvb_attach(lnbp21_attach, ttusb->fe, &ttusb->i2c_adap, 0, 0); |
| } else { // ALPS BSRU6 |
| ttusb->fe->ops.set_voltage = ttusb_set_voltage; |
| } |
| break; |
| } |
| |
| // Grundig 29504-491 |
| ttusb->fe = dvb_attach(tda8083_attach, &ttusb_novas_grundig_29504_491_config, &ttusb->i2c_adap); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.set_params = ttusb_novas_grundig_29504_491_tuner_set_params; |
| ttusb->fe->ops.set_voltage = ttusb_set_voltage; |
| break; |
| } |
| break; |
| |
| case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) |
| ttusb->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &ttusb->i2c_adap, read_pwm(ttusb)); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; |
| break; |
| } |
| |
| ttusb->fe = dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &ttusb->i2c_adap); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; |
| break; |
| } |
| break; |
| |
| case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??)) |
| // try the ALPS TDMB7 first |
| ttusb->fe = dvb_attach(cx22700_attach, &alps_tdmb7_config, &ttusb->i2c_adap); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.set_params = alps_tdmb7_tuner_set_params; |
| break; |
| } |
| |
| // Philips td1316 |
| ttusb->fe = dvb_attach(tda10046_attach, &philips_tdm1316l_config, &ttusb->i2c_adap); |
| if (ttusb->fe != NULL) { |
| ttusb->fe->ops.tuner_ops.init = philips_tdm1316l_tuner_init; |
| ttusb->fe->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; |
| break; |
| } |
| break; |
| } |
| |
| if (ttusb->fe == NULL) { |
| printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n", |
| le16_to_cpu(ttusb->dev->descriptor.idVendor), |
| le16_to_cpu(ttusb->dev->descriptor.idProduct)); |
| } else { |
| if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) { |
| printk("dvb-ttusb-budget: Frontend registration failed!\n"); |
| dvb_frontend_detach(ttusb->fe); |
| ttusb->fe = NULL; |
| } |
| } |
| } |
| |
| |
| |
| static struct i2c_algorithm ttusb_dec_algo = { |
| .master_xfer = master_xfer, |
| .functionality = functionality, |
| }; |
| |
| static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct usb_device *udev; |
| struct ttusb *ttusb; |
| int result; |
| |
| dprintk("%s: TTUSB DVB connected\n", __func__); |
| |
| udev = interface_to_usbdev(intf); |
| |
| if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV; |
| |
| if (!(ttusb = kzalloc(sizeof(struct ttusb), GFP_KERNEL))) |
| return -ENOMEM; |
| |
| ttusb->dev = udev; |
| ttusb->c = 0; |
| ttusb->mux_state = 0; |
| mutex_init(&ttusb->semi2c); |
| |
| mutex_lock(&ttusb->semi2c); |
| |
| mutex_init(&ttusb->semusb); |
| |
| ttusb_setup_interfaces(ttusb); |
| |
| result = ttusb_alloc_iso_urbs(ttusb); |
| if (result < 0) { |
| dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__); |
| mutex_unlock(&ttusb->semi2c); |
| kfree(ttusb); |
| return result; |
| } |
| |
| if (ttusb_init_controller(ttusb)) |
| printk("ttusb_init_controller: error\n"); |
| |
| mutex_unlock(&ttusb->semi2c); |
| |
| result = dvb_register_adapter(&ttusb->adapter, |
| "Technotrend/Hauppauge Nova-USB", |
| THIS_MODULE, &udev->dev, adapter_nr); |
| if (result < 0) { |
| ttusb_free_iso_urbs(ttusb); |
| kfree(ttusb); |
| return result; |
| } |
| ttusb->adapter.priv = ttusb; |
| |
| /* i2c */ |
| memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter)); |
| strcpy(ttusb->i2c_adap.name, "TTUSB DEC"); |
| |
| i2c_set_adapdata(&ttusb->i2c_adap, ttusb); |
| |
| ttusb->i2c_adap.algo = &ttusb_dec_algo; |
| ttusb->i2c_adap.algo_data = NULL; |
| ttusb->i2c_adap.dev.parent = &udev->dev; |
| |
| result = i2c_add_adapter(&ttusb->i2c_adap); |
| if (result) |
| goto err_unregister_adapter; |
| |
| memset(&ttusb->dvb_demux, 0, sizeof(ttusb->dvb_demux)); |
| |
| ttusb->dvb_demux.dmx.capabilities = |
| DMX_TS_FILTERING | DMX_SECTION_FILTERING; |
| ttusb->dvb_demux.priv = NULL; |
| #ifdef TTUSB_HWSECTIONS |
| ttusb->dvb_demux.filternum = TTUSB_MAXFILTER; |
| #else |
| ttusb->dvb_demux.filternum = 32; |
| #endif |
| ttusb->dvb_demux.feednum = TTUSB_MAXCHANNEL; |
| ttusb->dvb_demux.start_feed = ttusb_start_feed; |
| ttusb->dvb_demux.stop_feed = ttusb_stop_feed; |
| ttusb->dvb_demux.write_to_decoder = NULL; |
| |
| result = dvb_dmx_init(&ttusb->dvb_demux); |
| if (result < 0) { |
| printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result); |
| result = -ENODEV; |
| goto err_i2c_del_adapter; |
| } |
| //FIXME dmxdev (nur WAS?) |
| ttusb->dmxdev.filternum = ttusb->dvb_demux.filternum; |
| ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx; |
| ttusb->dmxdev.capabilities = 0; |
| |
| result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter); |
| if (result < 0) { |
| printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n", |
| result); |
| result = -ENODEV; |
| goto err_release_dmx; |
| } |
| |
| if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) { |
| printk("ttusb_dvb: dvb_net_init failed!\n"); |
| result = -ENODEV; |
| goto err_release_dmxdev; |
| } |
| |
| usb_set_intfdata(intf, (void *) ttusb); |
| |
| frontend_init(ttusb); |
| |
| return 0; |
| |
| err_release_dmxdev: |
| dvb_dmxdev_release(&ttusb->dmxdev); |
| err_release_dmx: |
| dvb_dmx_release(&ttusb->dvb_demux); |
| err_i2c_del_adapter: |
| i2c_del_adapter(&ttusb->i2c_adap); |
| err_unregister_adapter: |
| dvb_unregister_adapter (&ttusb->adapter); |
| return result; |
| } |
| |
| static void ttusb_disconnect(struct usb_interface *intf) |
| { |
| struct ttusb *ttusb = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| |
| ttusb->disconnecting = 1; |
| |
| ttusb_stop_iso_xfer(ttusb); |
| |
| ttusb->dvb_demux.dmx.close(&ttusb->dvb_demux.dmx); |
| dvb_net_release(&ttusb->dvbnet); |
| dvb_dmxdev_release(&ttusb->dmxdev); |
| dvb_dmx_release(&ttusb->dvb_demux); |
| if (ttusb->fe != NULL) { |
| dvb_unregister_frontend(ttusb->fe); |
| dvb_frontend_detach(ttusb->fe); |
| } |
| i2c_del_adapter(&ttusb->i2c_adap); |
| dvb_unregister_adapter(&ttusb->adapter); |
| |
| ttusb_free_iso_urbs(ttusb); |
| |
| kfree(ttusb); |
| |
| dprintk("%s: TTUSB DVB disconnected\n", __func__); |
| } |
| |
| static struct usb_device_id ttusb_table[] = { |
| {USB_DEVICE(0xb48, 0x1003)}, |
| {USB_DEVICE(0xb48, 0x1004)}, |
| {USB_DEVICE(0xb48, 0x1005)}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, ttusb_table); |
| |
| static struct usb_driver ttusb_driver = { |
| .name = "ttusb", |
| .probe = ttusb_probe, |
| .disconnect = ttusb_disconnect, |
| .id_table = ttusb_table, |
| }; |
| |
| static int __init ttusb_init(void) |
| { |
| int err; |
| |
| if ((err = usb_register(&ttusb_driver)) < 0) { |
| printk("%s: usb_register failed! Error number %d", |
| __FILE__, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit ttusb_exit(void) |
| { |
| usb_deregister(&ttusb_driver); |
| } |
| |
| module_init(ttusb_init); |
| module_exit(ttusb_exit); |
| |
| MODULE_AUTHOR("Holger Waechtler <holger@convergence.de>"); |
| MODULE_DESCRIPTION("TTUSB DVB Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE("ttusb-budget/dspbootcode.bin"); |