[ARM] nommu: Initial uCLinux support for MMU-based CPUs

In noMMU mode, various of functions which are defined in mm/proc-*.S
is not valid or needed to be avoided. i.g. switch_mm is not needed,
just returns and this makes the I & D caches are valid which shows
great improvement of performance including task switching and IPC.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 4e2a087..cb4d8f3 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 1999-2001 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -85,7 +86,9 @@
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+#ifdef CONFIG_MMU
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+#endif
 	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
 	bic	ip, ip, #0x000f			@ ............wcam
 	bic	ip, ip, #0x1100			@ ...i...s........
@@ -329,6 +332,7 @@
  */
 	.align	5
 ENTRY(cpu_arm926_switch_mm)
+#ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
@@ -341,6 +345,7 @@
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+#endif
 	mov	pc, lr
 
 /*
@@ -350,6 +355,7 @@
  */
 	.align	5
 ENTRY(cpu_arm926_set_pte)
+#ifdef CONFIG_MMU
 	str	r1, [r0], #-2048		@ linux version
 
 	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -378,6 +384,7 @@
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+#endif
 	mov	pc, lr
 
 	__INIT
@@ -387,7 +394,9 @@
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+#ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
+#endif
 
 
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH