wusb: add HWA host controller driver
Add a driver for Wireless USB host controllers connected via USB (a
Host Wire Adapter or HWA).
Signed-off-by: David Vrabel <david.vrabel@csr.com>
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 19ede32..8b7c419 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
+obj-$(CONFIG_USB_HWA_HCD) += host/
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d3ba351..5150441 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -317,3 +317,17 @@
To compile this driver a module, choose M here: the module
will be called "whci-hcd".
+
+config USB_HWA_HCD
+ tristate "Host Wire Adapter (HWA) driver"
+ depends on USB
+ select USB_WUSB
+ select UWB_HWA
+ help
+ This driver enables you to connect Wireless USB devices to
+ your system using a Host Wire Adaptor USB dongle. This is an
+ UWB Radio Controller and WUSB Host Controller connected to
+ your machine via USB (specified in WUSB1.0).
+
+ To compile this driver a module, choose M here: the module
+ will be called "hwa-hc".
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index c90cf86..23be222 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -21,3 +21,4 @@
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
+obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
new file mode 100644
index 0000000..64be4d8
--- /dev/null
+++ b/drivers/usb/host/hwa-hc.c
@@ -0,0 +1,925 @@
+/*
+ * Host Wire Adapter:
+ * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The HWA driver is a simple layer that forwards requests to the WAHC
+ * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host
+ * Controller) layers.
+ *
+ * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB
+ * Host Controller that is connected to your system via USB (a USB
+ * dongle that implements a USB host...). There is also a Device Wired
+ * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for
+ * transferring data (it is after all a USB host connected via
+ * Wireless USB), we have a common layer called Wire Adapter Host
+ * Controller that does all the hard work. The WUSBHC (Wireless USB
+ * Host Controller) is the part common to WUSB Host Controllers, the
+ * HWA and the PCI-based one, that is implemented following the WHCI
+ * spec. All these layers are implemented in ../wusbcore.
+ *
+ * The main functions are hwahc_op_urb_{en,de}queue(), that pass the
+ * job of converting a URB to a Wire Adapter
+ *
+ * Entry points:
+ *
+ * hwahc_driver_*() Driver initialization, registration and
+ * teardown.
+ *
+ * hwahc_probe() New device came up, create an instance for
+ * it [from device enumeration].
+ *
+ * hwahc_disconnect() Remove device instance [from device
+ * enumeration].
+ *
+ * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for
+ * starting/stopping/etc (some might be made also
+ * DWA).
+ */
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/completion.h>
+#include "../wusbcore/wa-hc.h"
+#include "../wusbcore/wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+struct hwahc {
+ struct wusbhc wusbhc; /* has to be 1st */
+ struct wahc wa;
+ u8 buffer[16]; /* for misc usb transactions */
+};
+
+/**
+ * FIXME should be wusbhc
+ *
+ * NOTE: we need to cache the Cluster ID because later...there is no
+ * way to get it :)
+ */
+static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id)
+{
+ int result;
+ struct wusbhc *wusbhc = &hwahc->wusbhc;
+ struct wahc *wa = &hwahc->wa;
+ struct device *dev = &wa->usb_iface->dev;
+
+ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_SET_CLUSTER_ID,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ cluster_id,
+ wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ NULL, 0, 1000 /* FIXME: arbitrary */);
+ if (result < 0)
+ dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n",
+ cluster_id, result);
+ else
+ wusbhc->cluster_id = cluster_id;
+ dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id);
+ return result;
+}
+
+static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
+{
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+
+ return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_SET_NUM_DNTS,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ interval << 8 | slots,
+ wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Reset a WUSB host controller and wait for it to complete doing it.
+ *
+ * @usb_hcd: Pointer to WUSB Host Controller instance.
+ *
+ */
+static int hwahc_op_reset(struct usb_hcd *usb_hcd)
+{
+ int result;
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct device *dev = &hwahc->wa.usb_iface->dev;
+
+ d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+ mutex_lock(&wusbhc->mutex);
+ wa_nep_disarm(&hwahc->wa);
+ result = __wa_set_feature(&hwahc->wa, WA_RESET);
+ if (result < 0) {
+ dev_err(dev, "error commanding HC to reset: %d\n", result);
+ goto error_unlock;
+ }
+ d_printf(3, dev, "reset: waiting for device to change state\n");
+ result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0);
+ if (result < 0) {
+ dev_err(dev, "error waiting for HC to reset: %d\n", result);
+ goto error_unlock;
+ }
+error_unlock:
+ mutex_unlock(&wusbhc->mutex);
+ d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+ return result;
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int hwahc_op_start(struct usb_hcd *usb_hcd)
+{
+ u8 addr;
+ int result;
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct device *dev = &hwahc->wa.usb_iface->dev;
+
+ /* Set up a Host Info WUSB Information Element */
+ d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+ result = -ENOSPC;
+ mutex_lock(&wusbhc->mutex);
+ /* Start the numbering from the top so that the bottom
+ * range of the unauth addr space is used for devices,
+ * the top for HCs; use 0xfe - RC# */
+ addr = wusb_cluster_id_get();
+ if (addr == 0)
+ goto error_cluster_id_get;
+ result = __hwahc_set_cluster_id(hwahc, addr);
+ if (result < 0)
+ goto error_set_cluster_id;
+
+ result = wa_nep_arm(&hwahc->wa, GFP_KERNEL);
+ if (result < 0) {
+ dev_err(dev, "cannot listen to notifications: %d\n", result);
+ goto error_stop;
+ }
+ usb_hcd->uses_new_polling = 1;
+ usb_hcd->poll_rh = 1;
+ usb_hcd->state = HC_STATE_RUNNING;
+ result = 0;
+out:
+ mutex_unlock(&wusbhc->mutex);
+ d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+ return result;
+
+error_stop:
+ __wa_stop(&hwahc->wa);
+error_set_cluster_id:
+ wusb_cluster_id_put(wusbhc->cluster_id);
+error_cluster_id_get:
+ goto out;
+
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc)
+{
+ int result;
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct device *dev = &hwahc->wa.usb_iface->dev;
+
+ /* Set up a Host Info WUSB Information Element */
+ d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+ result = -ENOSPC;
+
+ result = __wa_set_feature(&hwahc->wa, WA_ENABLE);
+ if (result < 0) {
+ dev_err(dev, "error commanding HC to start: %d\n", result);
+ goto error_stop;
+ }
+ result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE);
+ if (result < 0) {
+ dev_err(dev, "error waiting for HC to start: %d\n", result);
+ goto error_stop;
+ }
+ result = 0;
+out:
+ d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+ return result;
+
+error_stop:
+ result = __wa_clear_feature(&hwahc->wa, WA_ENABLE);
+ goto out;
+}
+
+static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
+ usb_hcd, hwahc, *(unsigned long *) &msg);
+ return -ENOSYS;
+}
+
+static int hwahc_op_resume(struct usb_hcd *usb_hcd)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+ usb_hcd, hwahc);
+ return -ENOSYS;
+}
+
+static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc)
+{
+ int result;
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct device *dev = &hwahc->wa.usb_iface->dev;
+
+ d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+ /* Nothing for now */
+ d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+ return;
+}
+
+/*
+ * No need to abort pipes, as when this is called, all the children
+ * has been disconnected and that has done it [through
+ * usb_disable_interface() -> usb_disable_endpoint() ->
+ * hwahc_op_ep_disable() - >rpipe_ep_disable()].
+ */
+static void hwahc_op_stop(struct usb_hcd *usb_hcd)
+{
+ int result;
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ struct device *dev = &wa->usb_iface->dev;
+
+ d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+ mutex_lock(&wusbhc->mutex);
+ wusbhc_stop(wusbhc);
+ wa_nep_disarm(&hwahc->wa);
+ result = __wa_stop(&hwahc->wa);
+ wusb_cluster_id_put(wusbhc->cluster_id);
+ mutex_unlock(&wusbhc->mutex);
+ d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+ return;
+}
+
+static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+ usb_hcd, hwahc);
+ return -ENOSYS;
+}
+
+static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
+ gfp_t gfp)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp);
+}
+
+static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb,
+ int status)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ return wa_urb_dequeue(&hwahc->wa, urb);
+}
+
+/*
+ * Release resources allocated for an endpoint
+ *
+ * If there is an associated rpipe to this endpoint, go ahead and put it.
+ */
+static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ rpipe_ep_disable(&hwahc->wa, ep);
+}
+
+/*
+ * Set the UWB MAS allocation for the WUSB cluster
+ *
+ * @stream_index: stream to use (-1 for cancelling the allocation)
+ * @mas: mas bitmap to use
+ */
+static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index,
+ const struct uwb_mas_bm *mas)
+{
+ int result;
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ struct device *dev = &wa->usb_iface->dev;
+ u8 mas_le[UWB_NUM_MAS/8];
+
+ /* Set the stream index */
+ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_SET_STREAM_IDX,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ stream_index,
+ wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ NULL, 0, 1000 /* FIXME: arbitrary */);
+ if (result < 0) {
+ dev_err(dev, "Cannot set WUSB stream index: %d\n", result);
+ goto out;
+ }
+ uwb_mas_bm_copy_le(mas_le, mas);
+ /* Set the MAS allocation */
+ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_SET_WUSB_MAS,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ mas_le, 32, 1000 /* FIXME: arbitrary */);
+ if (result < 0)
+ dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result);
+out:
+ return result;
+}
+
+/*
+ * Add an IE to the host's MMC
+ *
+ * @interval: See WUSB1.0[8.5.3.1]
+ * @repeat_cnt: See WUSB1.0[8.5.3.1]
+ * @handle: See WUSB1.0[8.5.3.1]
+ * @wuie: Pointer to the header of the WUSB IE data to add.
+ * MUST BE allocated in a kmalloc buffer (no stack or
+ * vmalloc).
+ *
+ * NOTE: the format of the WUSB IEs for MMCs are different to the
+ * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length +
+ * Id in WUSB IEs). Standards...you gotta love'em.
+ */
+static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval,
+ u8 repeat_cnt, u8 handle,
+ struct wuie_hdr *wuie)
+{
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+
+ return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_ADD_MMC_IE,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ interval << 8 | repeat_cnt,
+ handle << 8 | iface_no,
+ wuie, wuie->bLength, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Remove an IE to the host's MMC
+ *
+ * @handle: See WUSB1.0[8.5.3.1]
+ */
+static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
+{
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+ return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_REMOVE_MMC_IE,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, handle << 8 | iface_no,
+ NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Update device information for a given fake port
+ *
+ * @port_idx: Fake port to which device is connected (wusbhc index, not
+ * USB port number).
+ */
+static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc,
+ struct wusb_dev *wusb_dev)
+{
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+ struct hwa_dev_info *dev_info;
+ int ret;
+
+ /* fill out the Device Info buffer and send it */
+ dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL);
+ if (!dev_info)
+ return -ENOMEM;
+ uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability,
+ &wusb_dev->availability);
+ dev_info->bDeviceAddress = wusb_dev->addr;
+
+ /*
+ * If the descriptors haven't been read yet, use a default PHY
+ * rate of 53.3 Mbit/s only. The correct value will be used
+ * when this will be called again as part of the
+ * authentication process (which occurs after the descriptors
+ * have been read).
+ */
+ if (wusb_dev->wusb_cap_descr)
+ dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates;
+ else
+ dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53);
+
+ ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ WUSB_REQ_SET_DEV_INFO,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, wusb_dev->port_idx << 8 | iface_no,
+ dev_info, sizeof(struct hwa_dev_info),
+ 1000 /* FIXME: arbitrary */);
+ kfree(dev_info);
+ return ret;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+ const void *key, size_t key_size,
+ u8 key_idx)
+{
+ int result = -ENOMEM;
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_key_descriptor *keyd;
+ size_t keyd_len;
+
+ keyd_len = sizeof(*keyd) + key_size;
+ keyd = kzalloc(keyd_len, GFP_KERNEL);
+ if (keyd == NULL)
+ return -ENOMEM;
+
+ keyd->bLength = keyd_len;
+ keyd->bDescriptorType = USB_DT_KEY;
+ keyd->tTKID[0] = (tkid >> 0) & 0xff;
+ keyd->tTKID[1] = (tkid >> 8) & 0xff;
+ keyd->tTKID[2] = (tkid >> 16) & 0xff;
+ memcpy(keyd->bKeyData, key, key_size);
+
+ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ USB_REQ_SET_DESCRIPTOR,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ USB_DT_KEY << 8 | key_idx,
+ port_idx << 8 | iface_no,
+ keyd, keyd_len, 1000 /* FIXME: arbitrary */);
+
+ memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */
+ kfree(keyd);
+ return result;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+ const void *key, size_t key_size)
+{
+ int result = -ENOMEM;
+ struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ struct wahc *wa = &hwahc->wa;
+ u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+ u8 encryption_value;
+
+ /* Tell the host which key to use to talk to the device */
+ if (key) {
+ u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK,
+ WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+ result = __hwahc_dev_set_key(wusbhc, port_idx, tkid,
+ key, key_size, key_idx);
+ if (result < 0)
+ goto error_set_key;
+ encryption_value = wusbhc->ccm1_etd->bEncryptionValue;
+ } else {
+ /* FIXME: this should come from wusbhc->etd[UNSECURE].value */
+ encryption_value = 0;
+ }
+
+ /* Set the encryption type for commmunicating with the device */
+ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+ USB_REQ_SET_ENCRYPTION,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ encryption_value, port_idx << 8 | iface_no,
+ NULL, 0, 1000 /* FIXME: arbitrary */);
+ if (result < 0)
+ dev_err(wusbhc->dev, "Can't set host's WUSB encryption for "
+ "port index %u to %s (value %d): %d\n", port_idx,
+ wusb_et_name(wusbhc->ccm1_etd->bEncryptionType),
+ wusbhc->ccm1_etd->bEncryptionValue, result);
+error_set_key:
+ return result;
+}
+
+/*
+ * Set host's GTK key
+ */
+static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+ const void *key, size_t key_size)
+{
+ u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
+ WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+ return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx);
+}
+
+/*
+ * Get the Wire Adapter class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ * descriptor that includes the interfaces' and endpoints', so
+ * we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int wa_fill_descr(struct wahc *wa)
+{
+ int result;
+ struct device *dev = &wa->usb_iface->dev;
+ char *itr;
+ struct usb_device *usb_dev = wa->usb_dev;
+ struct usb_descriptor_header *hdr;
+ struct usb_wa_descriptor *wa_descr;
+ size_t itr_size, actconfig_idx;
+
+ actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+ sizeof(usb_dev->config[0]);
+ itr = usb_dev->rawdescriptors[actconfig_idx];
+ itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+ while (itr_size >= sizeof(*hdr)) {
+ hdr = (struct usb_descriptor_header *) itr;
+ d_printf(3, dev, "Extra device descriptor: "
+ "type %02x/%u bytes @ %zu (%zu left)\n",
+ hdr->bDescriptorType, hdr->bLength,
+ (itr - usb_dev->rawdescriptors[actconfig_idx]),
+ itr_size);
+ if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER)
+ goto found;
+ itr += hdr->bLength;
+ itr_size -= hdr->bLength;
+ }
+ dev_err(dev, "cannot find Wire Adapter Class descriptor\n");
+ return -ENODEV;
+
+found:
+ result = -EINVAL;
+ if (hdr->bLength > itr_size) { /* is it available? */
+ dev_err(dev, "incomplete Wire Adapter Class descriptor "
+ "(%zu bytes left, %u needed)\n",
+ itr_size, hdr->bLength);
+ goto error;
+ }
+ if (hdr->bLength < sizeof(*wa->wa_descr)) {
+ dev_err(dev, "short Wire Adapter Class descriptor\n");
+ goto error;
+ }
+ wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
+ /* Make LE fields CPU order */
+ wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion);
+ wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes);
+ wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock);
+ if (wa_descr->bcdWAVersion > 0x0100)
+ dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
+ wa_descr->bcdWAVersion & 0xff00 >> 8,
+ wa_descr->bcdWAVersion & 0x00ff);
+ result = 0;
+error:
+ return result;
+}
+
+static struct hc_driver hwahc_hc_driver = {
+ .description = "hwa-hcd",
+ .product_desc = "Wireless USB HWA host controller",
+ .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
+ .irq = NULL, /* FIXME */
+ .flags = HCD_USB2, /* FIXME */
+ .reset = hwahc_op_reset,
+ .start = hwahc_op_start,
+ .pci_suspend = hwahc_op_suspend,
+ .pci_resume = hwahc_op_resume,
+ .stop = hwahc_op_stop,
+ .get_frame_number = hwahc_op_get_frame_number,
+ .urb_enqueue = hwahc_op_urb_enqueue,
+ .urb_dequeue = hwahc_op_urb_dequeue,
+ .endpoint_disable = hwahc_op_endpoint_disable,
+
+ .hub_status_data = wusbhc_rh_status_data,
+ .hub_control = wusbhc_rh_control,
+ .bus_suspend = wusbhc_rh_suspend,
+ .bus_resume = wusbhc_rh_resume,
+ .start_port_reset = wusbhc_rh_start_port_reset,
+};
+
+static int hwahc_security_create(struct hwahc *hwahc)
+{
+ int result;
+ struct wusbhc *wusbhc = &hwahc->wusbhc;
+ struct usb_device *usb_dev = hwahc->wa.usb_dev;
+ struct device *dev = &usb_dev->dev;
+ struct usb_security_descriptor *secd;
+ struct usb_encryption_descriptor *etd;
+ void *itr, *top;
+ size_t itr_size, needed, bytes;
+ u8 index;
+ char buf[64];
+
+ /* Find the host's security descriptors in the config descr bundle */
+ index = (usb_dev->actconfig - usb_dev->config) /
+ sizeof(usb_dev->config[0]);
+ itr = usb_dev->rawdescriptors[index];
+ itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+ top = itr + itr_size;
+ result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index],
+ le16_to_cpu(usb_dev->actconfig->desc.wTotalLength),
+ USB_DT_SECURITY, (void **) &secd);
+ if (result == -1) {
+ dev_warn(dev, "BUG? WUSB host has no security descriptors\n");
+ return 0;
+ }
+ needed = sizeof(*secd);
+ if (top - (void *)secd < needed) {
+ dev_err(dev, "BUG? Not enough data to process security "
+ "descriptor header (%zu bytes left vs %zu needed)\n",
+ top - (void *) secd, needed);
+ return 0;
+ }
+ needed = le16_to_cpu(secd->wTotalLength);
+ if (top - (void *)secd < needed) {
+ dev_err(dev, "BUG? Not enough data to process security "
+ "descriptors (%zu bytes left vs %zu needed)\n",
+ top - (void *) secd, needed);
+ return 0;
+ }
+ /* Walk over the sec descriptors and store CCM1's on wusbhc */
+ itr = (void *) secd + sizeof(*secd);
+ top = (void *) secd + le16_to_cpu(secd->wTotalLength);
+ index = 0;
+ bytes = 0;
+ while (itr < top) {
+ etd = itr;
+ if (top - itr < sizeof(*etd)) {
+ dev_err(dev, "BUG: bad host security descriptor; "
+ "not enough data (%zu vs %zu left)\n",
+ top - itr, sizeof(*etd));
+ break;
+ }
+ if (etd->bLength < sizeof(*etd)) {
+ dev_err(dev, "BUG: bad host encryption descriptor; "
+ "descriptor is too short "
+ "(%zu vs %zu needed)\n",
+ (size_t)etd->bLength, sizeof(*etd));
+ break;
+ }
+ itr += etd->bLength;
+ bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
+ "%s (0x%02x) ",
+ wusb_et_name(etd->bEncryptionType),
+ etd->bEncryptionValue);
+ wusbhc->ccm1_etd = etd;
+ }
+ dev_info(dev, "supported encryption types: %s\n", buf);
+ if (wusbhc->ccm1_etd == NULL) {
+ dev_err(dev, "E: host doesn't support CCM-1 crypto\n");
+ return 0;
+ }
+ /* Pretty print what we support */
+ return 0;
+}
+
+static void hwahc_security_release(struct hwahc *hwahc)
+{
+ /* nothing to do here so far... */
+}
+
+static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface)
+{
+ int result;
+ struct device *dev = &iface->dev;
+ struct wusbhc *wusbhc = &hwahc->wusbhc;
+ struct wahc *wa = &hwahc->wa;
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+
+ wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
+ wa->usb_iface = usb_get_intf(iface);
+ wusbhc->dev = dev;
+ wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent);
+ if (wusbhc->uwb_rc == NULL) {
+ result = -ENODEV;
+ dev_err(dev, "Cannot get associated UWB Host Controller\n");
+ goto error_rc_get;
+ }
+ result = wa_fill_descr(wa); /* Get the device descriptor */
+ if (result < 0)
+ goto error_fill_descriptor;
+ if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) {
+ dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB "
+ "adapter (%u ports)\n", wa->wa_descr->bNumPorts);
+ wusbhc->ports_max = USB_MAXCHILDREN;
+ } else {
+ wusbhc->ports_max = wa->wa_descr->bNumPorts;
+ }
+ wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs;
+ wusbhc->start = __hwahc_op_wusbhc_start;
+ wusbhc->stop = __hwahc_op_wusbhc_stop;
+ wusbhc->mmcie_add = __hwahc_op_mmcie_add;
+ wusbhc->mmcie_rm = __hwahc_op_mmcie_rm;
+ wusbhc->dev_info_set = __hwahc_op_dev_info_set;
+ wusbhc->bwa_set = __hwahc_op_bwa_set;
+ wusbhc->set_num_dnts = __hwahc_op_set_num_dnts;
+ wusbhc->set_ptk = __hwahc_op_set_ptk;
+ wusbhc->set_gtk = __hwahc_op_set_gtk;
+ result = hwahc_security_create(hwahc);
+ if (result < 0) {
+ dev_err(dev, "Can't initialize security: %d\n", result);
+ goto error_security_create;
+ }
+ wa->wusb = wusbhc; /* FIXME: ugly, need to fix */
+ result = wusbhc_create(&hwahc->wusbhc);
+ if (result < 0) {
+ dev_err(dev, "Can't create WUSB HC structures: %d\n", result);
+ goto error_wusbhc_create;
+ }
+ result = wa_create(&hwahc->wa, iface);
+ if (result < 0)
+ goto error_wa_create;
+ return 0;
+
+error_wa_create:
+ wusbhc_destroy(&hwahc->wusbhc);
+error_wusbhc_create:
+ /* WA Descr fill allocs no resources */
+error_security_create:
+error_fill_descriptor:
+ uwb_rc_put(wusbhc->uwb_rc);
+error_rc_get:
+ usb_put_intf(iface);
+ usb_put_dev(usb_dev);
+ return result;
+}
+
+static void hwahc_destroy(struct hwahc *hwahc)
+{
+ struct wusbhc *wusbhc = &hwahc->wusbhc;
+
+ d_fnstart(1, NULL, "(hwahc %p)\n", hwahc);
+ mutex_lock(&wusbhc->mutex);
+ __wa_destroy(&hwahc->wa);
+ wusbhc_destroy(&hwahc->wusbhc);
+ hwahc_security_release(hwahc);
+ hwahc->wusbhc.dev = NULL;
+ uwb_rc_put(wusbhc->uwb_rc);
+ usb_put_intf(hwahc->wa.usb_iface);
+ usb_put_dev(hwahc->wa.usb_dev);
+ mutex_unlock(&wusbhc->mutex);
+ d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc);
+}
+
+static void hwahc_init(struct hwahc *hwahc)
+{
+ wa_init(&hwahc->wa);
+}
+
+static int hwahc_probe(struct usb_interface *usb_iface,
+ const struct usb_device_id *id)
+{
+ int result;
+ struct usb_hcd *usb_hcd;
+ struct wusbhc *wusbhc;
+ struct hwahc *hwahc;
+ struct device *dev = &usb_iface->dev;
+
+ d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id);
+ result = -ENOMEM;
+ usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa");
+ if (usb_hcd == NULL) {
+ dev_err(dev, "unable to allocate instance\n");
+ goto error_alloc;
+ }
+ usb_hcd->wireless = 1;
+ usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+ wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+ hwahc_init(hwahc);
+ result = hwahc_create(hwahc, usb_iface);
+ if (result < 0) {
+ dev_err(dev, "Cannot initialize internals: %d\n", result);
+ goto error_hwahc_create;
+ }
+ result = usb_add_hcd(usb_hcd, 0, 0);
+ if (result < 0) {
+ dev_err(dev, "Cannot add HCD: %d\n", result);
+ goto error_add_hcd;
+ }
+ result = wusbhc_b_create(&hwahc->wusbhc);
+ if (result < 0) {
+ dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result);
+ goto error_wusbhc_b_create;
+ }
+ d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id);
+ return 0;
+
+error_wusbhc_b_create:
+ usb_remove_hcd(usb_hcd);
+error_add_hcd:
+ hwahc_destroy(hwahc);
+error_hwahc_create:
+ usb_put_hcd(usb_hcd);
+error_alloc:
+ d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result);
+ return result;
+}
+
+static void hwahc_disconnect(struct usb_interface *usb_iface)
+{
+ struct usb_hcd *usb_hcd;
+ struct wusbhc *wusbhc;
+ struct hwahc *hwahc;
+
+ usb_hcd = usb_get_intfdata(usb_iface);
+ wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+ d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface);
+ wusbhc_b_destroy(&hwahc->wusbhc);
+ usb_remove_hcd(usb_hcd);
+ hwahc_destroy(hwahc);
+ usb_put_hcd(usb_hcd);
+ d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc,
+ usb_iface);
+}
+
+/** USB device ID's that we handle */
+static struct usb_device_id hwahc_id_table[] = {
+ /* FIXME: use class labels for this */
+ { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
+ {},
+};
+MODULE_DEVICE_TABLE(usb, hwahc_id_table);
+
+static struct usb_driver hwahc_driver = {
+ .name = "hwa-hc",
+ .probe = hwahc_probe,
+ .disconnect = hwahc_disconnect,
+ .id_table = hwahc_id_table,
+};
+
+static int __init hwahc_driver_init(void)
+{
+ int result;
+ result = usb_register(&hwahc_driver);
+ if (result < 0) {
+ printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n",
+ result);
+ goto error_usb_register;
+ }
+ return 0;
+
+error_usb_register:
+ return result;
+
+}
+module_init(hwahc_driver_init);
+
+static void __exit hwahc_driver_exit(void)
+{
+ usb_deregister(&hwahc_driver);
+}
+module_exit(hwahc_driver_exit);
+
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver");
+MODULE_LICENSE("GPL");