drivers/mtd/nand/nand_bcm_umi.h - kernel/msm-4.9 - Gitiles

 /*****************************************************************************
 * Copyright 2003 - 2009 Broadcom Corporation.  All rights reserved.
 *
 * Unless you and Broadcom execute a separate written software license
 * agreement governing use of this software, this software is licensed to you
 * under the terms of the GNU General Public License version 2, available at
 * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
 *
 * Notwithstanding the above, under no circumstances may you combine this
 * software in any way with any other Broadcom software provided under a
 * license other than the GPL, without Broadcom's express prior written
 * consent.
 *****************************************************************************/
 #ifndef NAND_BCM_UMI_H
 #define NAND_BCM_UMI_H

 /* ---- Include Files ---------------------------------------------------- */
 #include <mach/reg_umi.h>
 #include <mach/reg_nand.h>
 #include <cfg_global.h>

 /* ---- Constants and Types ---------------------------------------------- */
 #if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
 #define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0)
 #else
 #define NAND_ECC_BCH 0
 #endif

 #define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES	13

 #if NAND_ECC_BCH
 #ifdef BOOT0_BUILD
 #define NAND_ECC_NUM_BYTES 13
 #else
 #define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES
 #endif
 #else
 #define NAND_ECC_NUM_BYTES 3
 #endif

 #define NAND_DATA_ACCESS_SIZE 512

 /* ---- Variable Externs ------------------------------------------ */
 /* ---- Function Prototypes --------------------------------------- */
 int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
 				  int numEccBytes);

 /* Check in device is ready */
 static inline int nand_bcm_umi_dev_ready(void)
 {
 	return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
 }

 /* Wait until device is ready */
 static inline void nand_bcm_umi_wait_till_ready(void)
 {
 	while (nand_bcm_umi_dev_ready() == 0)
 		;
 }

 /* Enable Hamming ECC */
 static inline void nand_bcm_umi_hamming_enable_hwecc(void)
 {
 	/* disable and reset ECC, 512 byte page */
 	REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
 		REG_UMI_NAND_ECC_CSR_256BYTE);
 	/* enable ECC */
 	REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
 }

 #if NAND_ECC_BCH
 /* BCH ECC specifics */
 #define ECC_BITS_PER_CORRECTABLE_BIT 13

 /* Enable BCH Read ECC */
 static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
 {
 	/* disable and reset ECC */
 	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
 	/* Turn on ECC */
 	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
 }

 /* Enable BCH Write ECC */
 static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
 {
 	/* disable and reset ECC */
 	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
 	/* Turn on ECC */
 	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
 }

 /* Config number of BCH ECC bytes */
 static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
 {
 	uint32_t nValue;
 	uint32_t tValue;
 	uint32_t kValue;
 	uint32_t numBits = numEccBytes * 8;

 	/* disable and reset ECC */
 	REG_UMI_BCH_CTRL_STATUS =
 	    REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
 	    REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;

 	/* Every correctible bit requires 13 ECC bits */
 	tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);

 	/* Total data in number of bits for generating and computing BCH ECC */
 	nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8;

 	/* K parameter is used internally.  K = N - (T * 13) */
 	kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);

 	/* Write the settings */
 	REG_UMI_BCH_N = nValue;
 	REG_UMI_BCH_T = tValue;
 	REG_UMI_BCH_K = kValue;
 }

 /* Pause during ECC read calculation to skip bytes in OOB */
 static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
 {
 	REG_UMI_BCH_CTRL_STATUS =
 	    REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
 	    REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
 }

 /* Resume during ECC read calculation after skipping bytes in OOB */
 static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
 {
 	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
 }

 /* Poll read ECC calc to check when hardware completes */
 static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
 {
 	uint32_t regVal;

 	do {
 		/* wait for ECC to be valid */
 		regVal = REG_UMI_BCH_CTRL_STATUS;
 	} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);

 	return regVal;
 }

 /* Poll write ECC calc to check when hardware completes */
 static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
 {
 	/* wait for ECC to be valid */
 	while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
 	       == 0)
 		;
 }

 /* Read the OOB and ECC, for kernel write OOB to a buffer */
 #if defined(__KERNEL__) && !defined(STANDALONE)
 static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
 	uint8_t *eccCalc, int numEccBytes, uint8_t *oobp)
 #else
 static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
 	uint8_t *eccCalc, int numEccBytes)
 #endif
 {
 	int eccPos = 0;
 	int numToRead = 16;	/* There are 16 bytes per sector in the OOB */

 	/* ECC is already paused when this function is called */
 	if (pageSize != NAND_DATA_ACCESS_SIZE) {
 		/* skip BI */
 #if defined(__KERNEL__) && !defined(STANDALONE)
 		*oobp++ = REG_NAND_DATA8;
 #else
 		REG_NAND_DATA8;
 #endif
 		numToRead--;
 	}

 	while (numToRead > numEccBytes) {
 		/* skip free oob region */
 #if defined(__KERNEL__) && !defined(STANDALONE)
 		*oobp++ = REG_NAND_DATA8;
 #else
 		REG_NAND_DATA8;
 #endif
 		numToRead--;
 	}

 	if (pageSize == NAND_DATA_ACCESS_SIZE) {
 		/* read ECC bytes before BI */
 		nand_bcm_umi_bch_resume_read_ecc_calc();

 		while (numToRead > 11) {
 #if defined(__KERNEL__) && !defined(STANDALONE)
 			*oobp = REG_NAND_DATA8;
 			eccCalc[eccPos++] = *oobp;
 			oobp++;
 #else
 			eccCalc[eccPos++] = REG_NAND_DATA8;
 #endif
 			numToRead--;
 		}

 		nand_bcm_umi_bch_pause_read_ecc_calc();

 		if (numToRead == 11) {
 			/* read BI */
 #if defined(__KERNEL__) && !defined(STANDALONE)
 			*oobp++ = REG_NAND_DATA8;
 #else
 			REG_NAND_DATA8;
 #endif
 			numToRead--;
 		}

 	}
 	/* read ECC bytes */
 	nand_bcm_umi_bch_resume_read_ecc_calc();
 	while (numToRead) {
 #if defined(__KERNEL__) && !defined(STANDALONE)
 		*oobp = REG_NAND_DATA8;
 		eccCalc[eccPos++] = *oobp;
 		oobp++;
 #else
 		eccCalc[eccPos++] = REG_NAND_DATA8;
 #endif
 		numToRead--;
 	}
 }

 /* Helper function to write ECC */
 static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos,
 					  uint8_t *oobp, uint8_t eccVal)
 {
 	if (eccBytePos <= numEccBytes)
 		*oobp = eccVal;
 }

 /* Write OOB with ECC */
 static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
 						 uint8_t *oobp, int numEccBytes)
 {
 	uint32_t eccVal = 0xffffffff;

 	/* wait for write ECC to be valid */
 	nand_bcm_umi_bch_poll_write_ecc_calc();

 	/*
 	 ** Get the hardware ecc from the 32-bit result registers.
 	 ** Read after 512 byte accesses. Format B3B2B1B0
 	 ** where B3 = ecc3, etc.
 	 */

 	if (pageSize == NAND_DATA_ACCESS_SIZE) {
 		/* Now fill in the ECC bytes */
 		if (numEccBytes >= 13)
 			eccVal = REG_UMI_BCH_WR_ECC_3;

 		/* Usually we skip CM in oob[0,1] */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
 			(eccVal >> 16) & 0xff);
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1],
 			(eccVal >> 8) & 0xff);

 		/* Write ECC in oob[2,3,4] */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2],
 			eccVal & 0xff);	/* ECC 12 */

 		if (numEccBytes >= 9)
 			eccVal = REG_UMI_BCH_WR_ECC_2;

 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
 			(eccVal >> 24) & 0xff);	/* ECC11 */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4],
 			(eccVal >> 16) & 0xff);	/* ECC10 */

 		/* Always Skip BI in oob[5] */
 	} else {
 		/* Always Skip BI in oob[0] */

 		/* Now fill in the ECC bytes */
 		if (numEccBytes >= 13)
 			eccVal = REG_UMI_BCH_WR_ECC_3;

 		/* Usually skip CM in oob[1,2] */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
 			(eccVal >> 16) & 0xff);
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2],
 			(eccVal >> 8) & 0xff);

 		/* Write ECC in oob[3-15] */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3],
 			eccVal & 0xff);	/* ECC12 */

 		if (numEccBytes >= 9)
 			eccVal = REG_UMI_BCH_WR_ECC_2;

 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
 			(eccVal >> 24) & 0xff);	/* ECC11 */
 		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5],
 			(eccVal >> 16) & 0xff);	/* ECC10 */
 	}

 	/* Fill in the remainder of ECC locations */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6],
 		(eccVal >> 8) & 0xff);	/* ECC9 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7],
 		eccVal & 0xff);	/* ECC8 */

 	if (numEccBytes >= 5)
 		eccVal = REG_UMI_BCH_WR_ECC_1;

 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
 		(eccVal >> 24) & 0xff);	/* ECC7 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9],
 		(eccVal >> 16) & 0xff);	/* ECC6 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10],
 		(eccVal >> 8) & 0xff);	/* ECC5 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11],
 		eccVal & 0xff);	/* ECC4 */

 	if (numEccBytes >= 1)
 		eccVal = REG_UMI_BCH_WR_ECC_0;

 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
 		(eccVal >> 24) & 0xff);	/* ECC3 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13],
 		(eccVal >> 16) & 0xff);	/* ECC2 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14],
 		(eccVal >> 8) & 0xff);	/* ECC1 */
 	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15],
 		eccVal & 0xff);	/* ECC0 */
 }
 #endif

 #endif /* NAND_BCM_UMI_H */
	/*****************************************************************************
	* Copyright 2003 - 2009 Broadcom Corporation. All rights reserved.
	*
	* Unless you and Broadcom execute a separate written software license
	* agreement governing use of this software, this software is licensed to you
	* under the terms of the GNU General Public License version 2, available at
	* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
	*
	* Notwithstanding the above, under no circumstances may you combine this
	* software in any way with any other Broadcom software provided under a
	* license other than the GPL, without Broadcom's express prior written
	* consent.
	*****************************************************************************/
	#ifndef NAND_BCM_UMI_H
	#define NAND_BCM_UMI_H

	/* ---- Include Files ---------------------------------------------------- */
	#include <mach/reg_umi.h>
	#include <mach/reg_nand.h>
	#include <cfg_global.h>

	/* ---- Constants and Types ---------------------------------------------- */
	#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
	#define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0)
	#else
	#define NAND_ECC_BCH 0
	#endif

	#define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES 13

	#if NAND_ECC_BCH
	#ifdef BOOT0_BUILD
	#define NAND_ECC_NUM_BYTES 13
	#else
	#define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES
	#endif
	#else
	#define NAND_ECC_NUM_BYTES 3
	#endif

	#define NAND_DATA_ACCESS_SIZE 512

	/* ---- Variable Externs ------------------------------------------ */
	/* ---- Function Prototypes --------------------------------------- */
	int nand_bcm_umi_bch_correct_page(uint8_t datap, uint8_t readEccData,
	int numEccBytes);

	/* Check in device is ready */
	static inline int nand_bcm_umi_dev_ready(void)
	{
	return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
	}

	/* Wait until device is ready */
	static inline void nand_bcm_umi_wait_till_ready(void)
	{
	while (nand_bcm_umi_dev_ready() == 0)
	;
	}

	/* Enable Hamming ECC */
	static inline void nand_bcm_umi_hamming_enable_hwecc(void)
	{
	/* disable and reset ECC, 512 byte page */
	REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE \|
	REG_UMI_NAND_ECC_CSR_256BYTE);
	/* enable ECC */
	REG_UMI_NAND_ECC_CSR \|= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
	}

	#if NAND_ECC_BCH
	/* BCH ECC specifics */
	#define ECC_BITS_PER_CORRECTABLE_BIT 13

	/* Enable BCH Read ECC */
	static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
	{
	/* disable and reset ECC */
	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
	/* Turn on ECC */
	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
	}

	/* Enable BCH Write ECC */
	static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
	{
	/* disable and reset ECC */
	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
	/* Turn on ECC */
	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
	}

	/* Config number of BCH ECC bytes */
	static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
	{
	uint32_t nValue;
	uint32_t tValue;
	uint32_t kValue;
	uint32_t numBits = numEccBytes * 8;

	/* disable and reset ECC */
	REG_UMI_BCH_CTRL_STATUS =
	REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID \|
	REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;

	/* Every correctible bit requires 13 ECC bits */
	tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);

	/* Total data in number of bits for generating and computing BCH ECC */
	nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8;

	/* K parameter is used internally. K = N - (T * 13) */
	kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);

	/* Write the settings */
	REG_UMI_BCH_N = nValue;
	REG_UMI_BCH_T = tValue;
	REG_UMI_BCH_K = kValue;
	}

	/* Pause during ECC read calculation to skip bytes in OOB */
	static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
	{
	REG_UMI_BCH_CTRL_STATUS =
	REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN \|
	REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
	}

	/* Resume during ECC read calculation after skipping bytes in OOB */
	static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
	{
	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
	}

	/* Poll read ECC calc to check when hardware completes */
	static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
	{
	uint32_t regVal;

	do {
	/* wait for ECC to be valid */
	regVal = REG_UMI_BCH_CTRL_STATUS;
	} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);

	return regVal;
	}

	/* Poll write ECC calc to check when hardware completes */
	static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
	{
	/* wait for ECC to be valid */
	while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
	== 0)
	;
	}

	/* Read the OOB and ECC, for kernel write OOB to a buffer */
	#if defined(__KERNEL__) && !defined(STANDALONE)
	static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
	uint8_t eccCalc, int numEccBytes, uint8_t oobp)
	#else
	static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
	uint8_t *eccCalc, int numEccBytes)
	#endif
	{
	int eccPos = 0;
	int numToRead = 16; /* There are 16 bytes per sector in the OOB */

	/* ECC is already paused when this function is called */
	if (pageSize != NAND_DATA_ACCESS_SIZE) {
	/* skip BI */
	#if defined(__KERNEL__) && !defined(STANDALONE)
	*oobp++ = REG_NAND_DATA8;
	#else
	REG_NAND_DATA8;
	#endif
	numToRead--;
	}

	while (numToRead > numEccBytes) {
	/* skip free oob region */
	#if defined(__KERNEL__) && !defined(STANDALONE)
	*oobp++ = REG_NAND_DATA8;
	#else
	REG_NAND_DATA8;
	#endif
	numToRead--;
	}

	if (pageSize == NAND_DATA_ACCESS_SIZE) {
	/* read ECC bytes before BI */
	nand_bcm_umi_bch_resume_read_ecc_calc();

	while (numToRead > 11) {
	#if defined(__KERNEL__) && !defined(STANDALONE)
	*oobp = REG_NAND_DATA8;
	eccCalc[eccPos++] = *oobp;
	oobp++;
	#else
	eccCalc[eccPos++] = REG_NAND_DATA8;
	#endif
	numToRead--;
	}

	nand_bcm_umi_bch_pause_read_ecc_calc();

	if (numToRead == 11) {
	/* read BI */
	#if defined(__KERNEL__) && !defined(STANDALONE)
	*oobp++ = REG_NAND_DATA8;
	#else
	REG_NAND_DATA8;
	#endif
	numToRead--;
	}

	}
	/* read ECC bytes */
	nand_bcm_umi_bch_resume_read_ecc_calc();
	while (numToRead) {
	#if defined(__KERNEL__) && !defined(STANDALONE)
	*oobp = REG_NAND_DATA8;
	eccCalc[eccPos++] = *oobp;
	oobp++;
	#else
	eccCalc[eccPos++] = REG_NAND_DATA8;
	#endif
	numToRead--;
	}
	}

	/* Helper function to write ECC */
	static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos,
	uint8_t *oobp, uint8_t eccVal)
	{
	if (eccBytePos <= numEccBytes)
	*oobp = eccVal;
	}

	/* Write OOB with ECC */
	static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
	uint8_t *oobp, int numEccBytes)
	{
	uint32_t eccVal = 0xffffffff;

	/* wait for write ECC to be valid */
	nand_bcm_umi_bch_poll_write_ecc_calc();

	/*
	** Get the hardware ecc from the 32-bit result registers.
	** Read after 512 byte accesses. Format B3B2B1B0
	** where B3 = ecc3, etc.
	*/

	if (pageSize == NAND_DATA_ACCESS_SIZE) {
	/* Now fill in the ECC bytes */
	if (numEccBytes >= 13)
	eccVal = REG_UMI_BCH_WR_ECC_3;

	/* Usually we skip CM in oob[0,1] */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
	(eccVal >> 16) & 0xff);
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1],
	(eccVal >> 8) & 0xff);

	/* Write ECC in oob[2,3,4] */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2],
	eccVal & 0xff); /* ECC 12 */

	if (numEccBytes >= 9)
	eccVal = REG_UMI_BCH_WR_ECC_2;

	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
	(eccVal >> 24) & 0xff); /* ECC11 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4],
	(eccVal >> 16) & 0xff); /* ECC10 */

	/* Always Skip BI in oob[5] */
	} else {
	/* Always Skip BI in oob[0] */

	/* Now fill in the ECC bytes */
	if (numEccBytes >= 13)
	eccVal = REG_UMI_BCH_WR_ECC_3;

	/* Usually skip CM in oob[1,2] */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
	(eccVal >> 16) & 0xff);
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2],
	(eccVal >> 8) & 0xff);

	/* Write ECC in oob[3-15] */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3],
	eccVal & 0xff); /* ECC12 */

	if (numEccBytes >= 9)
	eccVal = REG_UMI_BCH_WR_ECC_2;

	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
	(eccVal >> 24) & 0xff); /* ECC11 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5],
	(eccVal >> 16) & 0xff); /* ECC10 */
	}

	/* Fill in the remainder of ECC locations */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6],
	(eccVal >> 8) & 0xff); /* ECC9 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7],
	eccVal & 0xff); /* ECC8 */

	if (numEccBytes >= 5)
	eccVal = REG_UMI_BCH_WR_ECC_1;

	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
	(eccVal >> 24) & 0xff); /* ECC7 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9],
	(eccVal >> 16) & 0xff); /* ECC6 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10],
	(eccVal >> 8) & 0xff); /* ECC5 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11],
	eccVal & 0xff); /* ECC4 */

	if (numEccBytes >= 1)
	eccVal = REG_UMI_BCH_WR_ECC_0;

	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
	(eccVal >> 24) & 0xff); /* ECC3 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13],
	(eccVal >> 16) & 0xff); /* ECC2 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14],
	(eccVal >> 8) & 0xff); /* ECC1 */
	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15],
	eccVal & 0xff); /* ECC0 */
	}
	#endif

	#endif /* NAND_BCM_UMI_H */