[ALSA] usbaudio - Add support for Edirol UA-101
Added support for the Edirol UA-101 (only in high-speed mode) by taking
the quirks for the UA-1000 and change them accordingly. Changes were
made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h'
MIDI and recording seem to work perfectly (with JACK), but playback
gives some few glitches. I think that's the mentioned
synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be
synchronized to capture'), so I didn't change that.
ToDo: Adding Mixer-Support for the built-in
control-panel/patch-bay/router.
Signed-off-by: Bjoern Fay <mail@bfay.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 8fd3759..4dfb91d 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3077,6 +3077,58 @@
return 0;
}
+/*
+ * Create a stream for an Edirol UA-101 interface.
+ * Copy, paste and modify from Edirol UA-1000
+ */
+static int create_ua101_quirk(struct snd_usb_audio *chip,
+ struct usb_interface *iface,
+ const struct snd_usb_audio_quirk *quirk)
+{
+ static const struct audioformat ua101_format = {
+ .format = SNDRV_PCM_FORMAT_S32_LE,
+ .fmt_type = USB_FORMAT_TYPE_I,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = 0,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ };
+ struct usb_host_interface *alts;
+ struct usb_interface_descriptor *altsd;
+ struct audioformat *fp;
+ int stream, err;
+
+ if (iface->num_altsetting != 2)
+ return -ENXIO;
+ alts = &iface->altsetting[1];
+ altsd = get_iface_desc(alts);
+ if (alts->extralen != 18 || alts->extra[1] != USB_DT_CS_INTERFACE ||
+ altsd->bNumEndpoints != 1)
+ return -ENXIO;
+
+ fp = kmemdup(&ua101_format, sizeof(*fp), GFP_KERNEL);
+ if (!fp)
+ return -ENOMEM;
+
+ fp->channels = alts->extra[11];
+ fp->iface = altsd->bInterfaceNumber;
+ fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
+ fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
+ fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+ fp->rate_max = fp->rate_min = combine_triple(&alts->extra[15]);
+
+ stream = (fp->endpoint & USB_DIR_IN)
+ ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+ err = add_audio_endpoint(chip, stream, fp);
+ if (err < 0) {
+ kfree(fp);
+ return err;
+ }
+ /* FIXME: playback must be synchronized to capture */
+ usb_set_interface(chip->dev, fp->iface, 0);
+ return 0;
+}
+
static int snd_usb_create_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk);
@@ -3258,6 +3310,7 @@
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UA700_UA25] = create_ua700_ua25_quirk,
[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
+ [QUIRK_AUDIO_EDIROL_UA101] = create_ua101_quirk,
};
if (quirk->type < QUIRK_TYPE_COUNT) {
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 0f4b2b8..2272f45 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -159,6 +159,7 @@
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UA700_UA25,
QUIRK_AUDIO_EDIROL_UA1000,
+ QUIRK_AUDIO_EDIROL_UA101,
QUIRK_TYPE_COUNT
};
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index a7e9563..25b4ab4f 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1098,7 +1098,37 @@
}
}
},
- /* TODO: add Edirol UA-101 support */
+/* Roland UA-101 in High-Speed Mode only */
+{
+ USB_DEVICE(0x0582, 0x007d),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Roland",
+ .product_name = "UA-101",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_EDIROL_UA101
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_EDIROL_UA101
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
/* has ID 0x0081 when not in "Advanced Driver" mode */
USB_DEVICE(0x0582, 0x0080),