diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index add8dc4..ac1e838 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4515,21 +4515,13 @@
 
 		E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
 		E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
-		retval = pci_enable_wake(pdev, PCI_D3hot, 1);
-		if (retval)
-			DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
-		retval = pci_enable_wake(pdev, PCI_D3cold, 1);
-		if (retval)
-			DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+		pci_enable_wake(pdev, PCI_D3cold, 1);
 	} else {
 		E1000_WRITE_REG(&adapter->hw, WUC, 0);
 		E1000_WRITE_REG(&adapter->hw, WUFC, 0);
-		retval = pci_enable_wake(pdev, PCI_D3hot, 0);
-		if (retval)
-			DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
-		retval = pci_enable_wake(pdev, PCI_D3cold, 0);
-		if (retval)
-			DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
 	if (adapter->hw.mac_type >= e1000_82540 &&
@@ -4538,13 +4530,8 @@
 		if (manc & E1000_MANC_SMBUS_EN) {
 			manc |= E1000_MANC_ARP_EN;
 			E1000_WRITE_REG(&adapter->hw, MANC, manc);
-			retval = pci_enable_wake(pdev, PCI_D3hot, 1);
-			if (retval)
-				DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
-			retval = pci_enable_wake(pdev, PCI_D3cold, 1);
-			if (retval)
-				DPRINTK(PROBE, ERR,
-				        "Error enabling D3 cold wake\n");
+			pci_enable_wake(pdev, PCI_D3hot, 1);
+			pci_enable_wake(pdev, PCI_D3cold, 1);
 		}
 	}
 
@@ -4554,9 +4541,7 @@
 
 	pci_disable_device(pdev);
 
-	retval = pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	if (retval)
-		DPRINTK(PROBE, ERR, "Error in setting power state\n");
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
 }
@@ -4567,22 +4552,15 @@
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	int retval;
 	uint32_t manc, ret_val;
 
-	retval = pci_set_power_state(pdev, PCI_D0);
-	if (retval)
-		DPRINTK(PROBE, ERR, "Error in setting power state\n");
+	pci_set_power_state(pdev, PCI_D0);
 	e1000_pci_restore_state(adapter);
 	ret_val = pci_enable_device(pdev);
 	pci_set_master(pdev);
 
-	retval = pci_enable_wake(pdev, PCI_D3hot, 0);
-	if (retval)
-		DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
-	retval = pci_enable_wake(pdev, PCI_D3cold, 0);
-	if (retval)
-		DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_enable_wake(pdev, PCI_D3cold, 0);
 
 	e1000_reset(adapter);
 	E1000_WRITE_REG(&adapter->hw, WUS, ~0);