clk: tegra: Fix PLLE programming
PLLE has M, N and P divider shift and width parameters that differ from
the defaults. Furthermore, when clearing the M, N and P divider fields
the corresponding masks were never shifted, thereby clearing only the
lowest bits of the register. This lead to a situation where the PLLE
programming would only work if the register hadn't been touched before.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 0d20241..3579113 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -58,9 +58,9 @@
#define PLLDU_LFCON_SET_DIVN 600
#define PLLE_BASE_DIVCML_SHIFT 24
-#define PLLE_BASE_DIVCML_WIDTH 4
+#define PLLE_BASE_DIVCML_MASK 0xf
#define PLLE_BASE_DIVP_SHIFT 16
-#define PLLE_BASE_DIVP_WIDTH 7
+#define PLLE_BASE_DIVP_WIDTH 6
#define PLLE_BASE_DIVN_SHIFT 8
#define PLLE_BASE_DIVN_WIDTH 8
#define PLLE_BASE_DIVM_SHIFT 0
@@ -730,8 +730,10 @@
if (pll->params->flags & TEGRA_PLLE_CONFIGURE) {
/* configure dividers */
val = pll_readl_base(pll);
- val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
- val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT);
+ val &= ~(divp_mask(pll) << PLLE_BASE_DIVP_SHIFT |
+ divn_mask(pll) << PLLE_BASE_DIVN_SHIFT |
+ divm_mask(pll) << PLLE_BASE_DIVM_SHIFT);
+ val &= ~(PLLE_BASE_DIVCML_MASK << PLLE_BASE_DIVCML_SHIFT);
val |= sel.m << pll->params->div_nmp->divm_shift;
val |= sel.n << pll->params->div_nmp->divn_shift;
val |= sel.p << pll->params->div_nmp->divp_shift;
@@ -745,6 +747,7 @@
pll_writel_misc(val, pll);
val = readl(pll->clk_base + PLLE_SS_CTRL);
+ val &= ~PLLE_SS_COEFFICIENTS_MASK;
val |= PLLE_SS_DISABLE;
writel(val, pll->clk_base + PLLE_SS_CTRL);
@@ -1292,8 +1295,10 @@
pll_writel(val, PLLE_SS_CTRL, pll);
val = pll_readl_base(pll);
- val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
- val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT);
+ val &= ~(divp_mask(pll) << PLLE_BASE_DIVP_SHIFT |
+ divn_mask(pll) << PLLE_BASE_DIVN_SHIFT |
+ divm_mask(pll) << PLLE_BASE_DIVM_SHIFT);
+ val &= ~(PLLE_BASE_DIVCML_MASK << PLLE_BASE_DIVCML_SHIFT);
val |= sel.m << pll->params->div_nmp->divm_shift;
val |= sel.n << pll->params->div_nmp->divn_shift;
val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT;
@@ -1410,6 +1415,15 @@
return clk;
}
+static struct div_nmp pll_e_nmp = {
+ .divn_shift = PLLE_BASE_DIVN_SHIFT,
+ .divn_width = PLLE_BASE_DIVN_WIDTH,
+ .divm_shift = PLLE_BASE_DIVM_SHIFT,
+ .divm_width = PLLE_BASE_DIVM_WIDTH,
+ .divp_shift = PLLE_BASE_DIVP_SHIFT,
+ .divp_width = PLLE_BASE_DIVP_WIDTH,
+};
+
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, struct tegra_clk_pll_params *pll_params,
@@ -1420,6 +1434,10 @@
pll_params->flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS;
pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+
+ if (!pll_params->div_nmp)
+ pll_params->div_nmp = &pll_e_nmp;
+
pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);