staging: comedi: s526: remove printk noise
Remove the function trace printk noise.
Change the final attach message into a simple dev_info.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index f0144d9..362c955 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -250,7 +250,6 @@
data[2]: Pre-load Register Value
data[3]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n");
devpriv->s526_gpct_config[subdev_channel].app =
PositionMeasurement;
@@ -355,7 +354,6 @@
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n");
devpriv->s526_gpct_config[subdev_channel].app =
SinglePulseGeneration;
@@ -400,7 +398,6 @@
data[3]: Pre-load Register 1 Value
data[4]: Conter Control Register
*/
- printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n");
devpriv->s526_gpct_config[subdev_channel].app =
PulseTrainGeneration;
@@ -438,7 +435,6 @@
break;
default:
- printk(KERN_ERR "s526: unsupported GPCT_insn_config\n");
return -EINVAL;
break;
}
@@ -455,21 +451,16 @@
short value;
union cmReg cmReg;
- printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n",
- subdev_channel);
cmReg.value = inw(dev->iobase + REG_C0M + subdev_channel * 8);
- printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value);
/* Check what Application of Counter this channel is configured for */
switch (devpriv->s526_gpct_config[subdev_channel].app) {
case PositionMeasurement:
- printk(KERN_INFO "S526: INSN_WRITE: PM\n");
outw(0xFFFF & ((*data) >> 16), dev->iobase + REG_C0H +
subdev_channel * 8);
outw(0xFFFF & (*data), dev->iobase + REG_C0L + subdev_channel * 8);
break;
case SinglePulseGeneration:
- printk(KERN_INFO "S526: INSN_WRITE: SPG\n");
outw(0xFFFF & ((*data) >> 16), dev->iobase + REG_C0H +
subdev_channel * 8);
outw(0xFFFF & (*data), dev->iobase + REG_C0L + subdev_channel * 8);
@@ -482,15 +473,12 @@
The above periods must be expressed as a multiple of the
pulse frequency on the selected source
*/
- printk(KERN_INFO "S526: INSN_WRITE: PTG\n");
if ((data[1] > data[0]) && (data[0] > 0)) {
(devpriv->s526_gpct_config[subdev_channel]).data[0] =
data[0];
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
data[1];
} else {
- printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
- data[0], data[1]);
return -EINVAL;
}
@@ -500,9 +488,6 @@
outw(value, dev->iobase + REG_C0L + subdev_channel * 8);
break;
default: /* Impossible */
- printk
- ("s526: INSN_WRITE: Functionality %d not implemented yet\n",
- devpriv->s526_gpct_config[subdev_channel].app);
return -EINVAL;
break;
}
@@ -574,13 +559,8 @@
break;
}
}
- if (i == TIMEOUT) {
- /* printk() should be used instead of printk()
- * whenever the code can be called from real-time. */
- printk(KERN_ERR "s526: ADC(0x%04x) timeout\n",
- inw(dev->iobase + REG_ISR));
+ if (i == TIMEOUT)
return -ETIMEDOUT;
- }
/* read data */
d = inw(dev->iobase + REG_ADD);
@@ -674,8 +654,6 @@
int chan = CR_CHAN(insn->chanspec);
int group, mask;
- printk(KERN_INFO "S526 DIO insn_config\n");
-
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
* contains the channel to be changed, and data[0] contains the
@@ -712,8 +690,6 @@
int iobase;
int ret;
- printk(KERN_INFO "comedi%d: s526: ", dev->minor);
-
iobase = it->options[0];
if (!iobase || !request_region(iobase, S526_IOSIZE, board->name)) {
comedi_error(dev, "I/O port conflict");
@@ -721,8 +697,6 @@
}
dev->iobase = iobase;
- printk("iobase=0x%lx\n", dev->iobase);
-
dev->board_name = board->name;
ret = alloc_private(dev, sizeof(*devpriv));
@@ -792,7 +766,7 @@
s->type = COMEDI_SUBD_UNUSED;
}
- printk(KERN_INFO "attached\n");
+ dev_info(dev->class_dev, "%s attached\n", dev->board_name);
return 1;
}