[media] cx23885: make analog support work for HVR_1250 (cx23885 variant)
The analog support in the cx23885 driver was completely broken for the
HVR-1250. Add the necessary code.
Note that this only implements analog for the composite and s-video
inputs. The tuner input continues to be non-functional due to a lack of
analog support in the mt2131 driver.
Validated with the following boards:
HVR-1250 (0070:7911)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 13739e0..f8664f2 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -127,22 +127,37 @@
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .tuner_bus = 1,
+#endif
+ .force_bff = 1,
.input = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0xff00,
}, {
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
- }, {
+#endif
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
} },
},
@@ -1526,10 +1541,10 @@
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index c654bdc..4d05689 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -505,6 +505,7 @@
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,