m68k: remove thread_info struct from thread struct
Currently on m68k we have a comeplete thread_info structure stored inside
of the thread_struct, and we also have it in the initial part of the kernel
stack. Mostly the code currently uses the one inside of the thread_struct,
only using the "task" pointer from the stack based one.
This is wasteful and confusing, we should only have the single instance of
thread_info inside the stack page. And this is the norm for all other
architectures.
This change makes m68k handle thread_info consistently on both MMU enabled
and non-MMU setups.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 568facf..7ec0609 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -88,14 +88,12 @@
unsigned long fp[8*3];
unsigned long fpcntl[3]; /* fp control regs */
unsigned char fpstate[FPSTATESIZE]; /* floating point state */
- struct thread_info info;
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
.sr = PS_S, \
.fs = __KERNEL_DS, \
- .info = INIT_THREAD_INFO(init_task), \
}
#ifdef CONFIG_MMU
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
index e4e2159..01cef3c 100644
--- a/arch/m68k/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info.h
@@ -47,34 +47,6 @@
#define init_stack (init_thread_union.stack)
-#ifdef CONFIG_MMU
-
-#ifndef __ASSEMBLY__
-#include <asm/current.h>
-#endif
-
-#ifdef ASM_OFFSETS_C
-#define task_thread_info(tsk) ((struct thread_info *) NULL)
-#else
-#include <asm/asm-offsets.h>
-#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_INFO))
-#endif
-
-#define init_thread_info (init_task.thread.info)
-#define task_stack_page(tsk) ((tsk)->stack)
-#define current_thread_info() task_thread_info(current)
-
-#define __HAVE_THREAD_FUNCTIONS
-
-#define setup_thread_stack(p, org) ({ \
- *(struct task_struct **)(p)->stack = (p); \
- task_thread_info(p)->task = (p); \
-})
-
-#define end_of_stack(p) ((unsigned long *)(p)->stack + 1)
-
-#else /* !CONFIG_MMU */
-
#ifndef __ASSEMBLY__
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
@@ -92,8 +64,6 @@
#define init_thread_info (init_thread_union.thread_info)
-#endif /* CONFIG_MMU */
-
/* entry.S relies on these definitions!
* bits 0-7 are tested at every exception exit
* bits 8-15 are also tested at syscall exit
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index f6a54e2..a972b00 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -24,7 +24,7 @@
/* offsets into the task struct */
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
+ DEFINE(TASK_STACK, offsetof(struct task_struct, stack));
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index c713f51..675a854 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -99,7 +99,8 @@
jra .Lret_from_exception
ENTRY(ret_from_signal)
- tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
+ movel %curptr@(TASK_STACK),%a1
+ tstb %a1@(TINFO_FLAGS+2)
jge 1f
jbsr syscall_trace
1: RESTORE_SWITCH_STACK
@@ -120,11 +121,13 @@
SAVE_ALL_SYS
GET_CURRENT(%d1)
+ movel %d1,%a1
+
| save top of frame
movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
| syscall trace?
- tstb %curptr@(TASK_INFO+TINFO_FLAGS+2)
+ tstb %a1@(TINFO_FLAGS+2)
jmi do_trace_entry
cmpl #NR_syscalls,%d0
jcc badsys
@@ -133,7 +136,8 @@
movel %d0,%sp@(PT_OFF_D0) | save the return value
ret_from_syscall:
|oriw #0x0700,%sr
- movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
+ movel %curptr@(TASK_STACK),%a1
+ movew %a1@(TINFO_FLAGS+2),%d0
jne syscall_exit_work
1: RESTORE_ALL
@@ -159,7 +163,8 @@
andw #ALLOWINT,%sr
resume_userspace:
- moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
+ movel %curptr@(TASK_STACK),%a1
+ moveb %a1@(TINFO_FLAGS+3),%d0
jne exit_work
1: RESTORE_ALL
@@ -199,7 +204,8 @@
ENTRY(auto_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
| put exception # in d0
bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
subw #VEC_SPUR,%d0
@@ -211,7 +217,8 @@
addql #8,%sp | pop parameters off stack
ret_from_interrupt:
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
2: RESTORE_ALL
@@ -232,7 +239,8 @@
ENTRY(user_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
| put exception # in d0
bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
user_irqvec_fixup = . + 2
@@ -243,7 +251,8 @@
jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
RESTORE_ALL
@@ -252,13 +261,15 @@
ENTRY(bad_inthandler)
SAVE_ALL_INT
GET_CURRENT(%d0)
- addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
movel %sp,%sp@-
jsr handle_badint
addql #4,%sp
- subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
jeq ret_from_last_interrupt
RESTORE_ALL