Merge tag 'v4.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "Rockchip dts32 changes for 4.4" from Heiko Stuebner:
DTS changes including one new Veyron-board and the Radxa Rock2
system-on-module as well as the square baseboard. On top of that
a lot of mmc-related changes to improve speeds on the Cortex-A9
socs and also setting up the supplies for rk3288 mmc-controllers
for the following mmc-tuning support. And of course the dts-part
of the rk3288 power-domains.
* tag 'v4.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add the support power-domain node on RK3288 SoCs
ARM: dts: rockchip: add rk3288-firefly iodomains
ARM: dts: rockchip: fixup firefly mmc supplies
ARM: dts: rockchip: add rk3288-popmetal iodomains
ARM: dts: rockchip: add rk3288-popmetal mmc supplies
ARM: dts: rockchip: add rk3288-popmetal board to dtb list
ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board
ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards
ARM: dts: rockchip: support highspeed sd-cards for rk3188-radxarock
ARM: dts: rockchip: Add the hdmi-ddc pinctrl settings for rk3288
ARM: dts: rockchip: Remove specific cts pullup from veyron
ARM: dts: rockchip: pull up cts lines on rk3288
ARM: dts: rockchip: add veyron-jaq board
ARM: dts: rockchip: Add support for SD/MMC on MarsBoard-RK3066
dt-bindings: add power-domain header for RK3288 SoCs
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index af58cd7..8e985dd 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -17,6 +17,10 @@
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Radxa Rock2 Square board:
+ Required root node properties:
+ - compatible = "radxa,rock2-square", "rockchip,rk3288";
+
- Firefly Firefly-RK3288 board:
Required root node properties:
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
@@ -31,6 +35,13 @@
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Jaq (Haier Chromebook 11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jerry (Hisense Chromebook C11 and more):
Required root node properties:
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7267340..548bbaa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -509,7 +509,10 @@
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
+ rk3288-popmetal.dtb \
rk3288-r89.dtb \
+ rk3288-rock2-square.dtb \
+ rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c027375..38c91a8 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -186,6 +186,8 @@
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index bae965c..7cdc308 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -178,6 +178,14 @@
};
};
+&mmc0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
+};
+
&pinctrl {
lan8720a {
phy_int: phy-int {
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index e36383c..341c1f8 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -330,6 +330,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5..9b31abe 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -289,6 +289,8 @@
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 20fa0ef..4e3fd9a 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -48,6 +48,14 @@
reg = <0 0x80000000>;
};
+ dovdd_1v8: dovdd-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dovdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -55,6 +63,22 @@
clock-output-names = "ext_gmac";
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&dovdd_1v8>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
pinctrl-names = "default";
@@ -96,7 +120,7 @@
};
};
- vcc_sys: vsys-regulator {
+ vbat_wl: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
@@ -160,6 +184,23 @@
regulator-always-on;
vin-supply = <&vcc_5v>;
};
+
+ /*
+ * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
@@ -325,7 +366,7 @@
regulator-always-on;
};
- vcc_18: REG11 {
+ vccio_wl: vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -373,6 +414,12 @@
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
gmac {
phy_int: phy-int {
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -445,7 +492,8 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
- vmmc-supply = <&vcc_18>;
+ vmmc-supply = <&vbat_wl>;
+ vqmmc-supply = <&vccio_wl>;
status = "okay";
};
@@ -459,6 +507,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f82b956..65c4756 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -79,6 +79,22 @@
};
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc18_dvp>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -86,6 +102,26 @@
pinctrl-0 = <&ir_int>;
};
+ vcc_flash: flash-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_flash";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -94,6 +130,31 @@
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc18_dvp: vcc18-dvp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc18-dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
@@ -109,6 +170,8 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_flash>;
status = "okay";
};
@@ -121,6 +184,8 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
@@ -297,22 +362,22 @@
};
};
- vcca_codec: LDO_REG8 {
+ vcca_33: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_codec";
+ regulator-name = "vcca_33";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
- vcc_wl: SWITCH_REG1 {
+ vccio_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_wl";
+ regulator-name = "vccio_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
@@ -388,6 +453,12 @@
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ir {
ir_int: ir-int {
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -405,6 +476,12 @@
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&tsadc {
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
new file mode 100644
index 0000000..1813b7c3
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -0,0 +1,277 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ reg = <0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vccio_pmu>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &phy_rst>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ rx_delay = <0x10>;
+ tx_delay = <0x30>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ inl1-supply = <&vcc_io>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "VCCA_CODEC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_tp: REG8 {
+ regulator-name = "VCCA_TP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "VCCIO_PMU";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ phy_rst: phy-rst {
+ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
new file mode 100644
index 0000000..d5f6f26
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -0,0 +1,149 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+ model = "Radxa Rock 2 Square";
+ compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ vcc_usb_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ /* Always on as the rockchip usb phy doesn't have a vbus-supply
+ * property
+ */
+ regulator-always-on;
+ regulator-name = "vcc_host";
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&gmac {
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
new file mode 100644
index 0000000..c2f52cf
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -0,0 +1,176 @@
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Jaq";
+ compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ mic_vcc: LDO_REG2 {
+ regulator-name = "mic_vcc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ edp {
+ edp_hpd: edp_hpd {
+ rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 275c78c..d4263ed 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -544,18 +544,6 @@
};
};
- /*
- * On Marvell-based hardware this is a no-connect. Make sure we enable
- * the pullup so that the line doesn't float. The pullup shouldn't
- * hurt on Broadcom-based hardware since the other side is actively
- * driving this signal. As proof: we've already got a pullup on RX.
- */
- uart0 {
- uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
- };
- };
-
write-protect {
fw_wp_ap: fw-wp-ap {
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 906e938..d6c2f91 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -44,6 +44,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
#include "skeleton.dtsi"
/ {
@@ -613,8 +614,98 @@
};
pmu: power-management@ff730000 {
- compatible = "rockchip,rk3288-pmu", "syscon";
+ compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
reg = <0xff730000 0x100>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Note: Although SCLK_* are the working clocks
+ * of device without including on the NOC, needed for
+ * synchronous reset.
+ *
+ * The clocks on the which NOC:
+ * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+ * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+ * ACLK_RGA is on ACLK_RGA_NIU.
+ * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+ *
+ * Which clock are device clocks:
+ * clocks devices
+ * *_IEP IEP:Image Enhancement Processor
+ * *_ISP ISP:Image Signal Processing
+ * *_VIP VIP:Video Input Processor
+ * *_VOP* VOP:Visual Output Processor
+ * *_RGA RGA
+ * *_EDP* EDP
+ * *_LVDS_* LVDS
+ * *_HDMI HDMI
+ * *_MIPI_* MIPI
+ */
+ pd_vio {
+ reg = <RK3288_PD_VIO>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru ACLK_ISP>,
+ <&cru ACLK_RGA>,
+ <&cru ACLK_VIP>,
+ <&cru ACLK_VOP0>,
+ <&cru ACLK_VOP1>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru HCLK_IEP>,
+ <&cru HCLK_ISP>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VIP>,
+ <&cru HCLK_VOP0>,
+ <&cru HCLK_VOP1>,
+ <&cru PCLK_EDP_CTRL>,
+ <&cru PCLK_HDMI_CTRL>,
+ <&cru PCLK_LVDS_PHY>,
+ <&cru PCLK_MIPI_CSI>,
+ <&cru PCLK_MIPI_DSI0>,
+ <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_EDP_24M>,
+ <&cru SCLK_EDP>,
+ <&cru SCLK_ISP_JPE>,
+ <&cru SCLK_ISP>,
+ <&cru SCLK_RGA>;
+ };
+
+ /*
+ * Note: The following 3 are HEVC(H.265) clocks,
+ * and on the ACLK_HEVC_NIU (NOC).
+ */
+ pd_hevc {
+ reg = <RK3288_PD_HEVC>;
+ clocks = <&cru ACLK_HEVC>,
+ <&cru SCLK_HEVC_CABAC>,
+ <&cru SCLK_HEVC_CORE>;
+ };
+
+ /*
+ * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+ * (video endecoder & decoder) clocks that on the
+ * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+ */
+ pd_video {
+ reg = <RK3288_PD_VIDEO>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ };
+
+ /*
+ * Note: ACLK_GPU is the GPU clock,
+ * and on the ACLK_GPU_NIU (NOC).
+ */
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
};
sgrf: syscon@ff740000 {
@@ -674,6 +765,7 @@
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
@@ -695,6 +787,7 @@
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -705,6 +798,7 @@
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
@@ -726,6 +820,7 @@
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -738,6 +833,7 @@
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
ports {
@@ -923,6 +1019,13 @@
#interrupt-cells = <2>;
};
+ hdmi {
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+ <7 20 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
@@ -1211,7 +1314,7 @@
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
@@ -1226,7 +1329,7 @@
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
@@ -1249,7 +1352,7 @@
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
@@ -1264,7 +1367,7 @@
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 14 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
diff --git a/include/dt-bindings/power/rk3288-power.h b/include/dt-bindings/power/rk3288-power.h
new file mode 100644
index 0000000..b8b1045
--- /dev/null
+++ b/include/dt-bindings/power/rk3288-power.h
@@ -0,0 +1,31 @@
+#ifndef __DT_BINDINGS_POWER_RK3288_POWER_H__
+#define __DT_BINDINGS_POWER_RK3288_POWER_H__
+
+/**
+ * RK3288 Power Domain and Voltage Domain Summary.
+ */
+
+/* VD_CORE */
+#define RK3288_PD_A17_0 0
+#define RK3288_PD_A17_1 1
+#define RK3288_PD_A17_2 2
+#define RK3288_PD_A17_3 3
+#define RK3288_PD_SCU 4
+#define RK3288_PD_DEBUG 5
+#define RK3288_PD_MEM 6
+
+/* VD_LOGIC */
+#define RK3288_PD_BUS 7
+#define RK3288_PD_PERI 8
+#define RK3288_PD_VIO 9
+#define RK3288_PD_ALIVE 10
+#define RK3288_PD_HEVC 11
+#define RK3288_PD_VIDEO 12
+
+/* VD_GPU */
+#define RK3288_PD_GPU 13
+
+/* VD_PMU */
+#define RK3288_PD_PMU 14
+
+#endif