drivers/regulator/rc5t583-regulator.c - kernel/msm-4.9 - Gitiles

 /*
  * Regulator driver for RICOH RC5T583 power management chip.
  *
  * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
  * Author: Laxman dewangan <ldewangan@nvidia.com>
  *
  * based on code
  *      Copyright (C) 2011 RICOH COMPANY,LTD
  *
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/mfd/rc5t583.h>

 struct rc5t583_regulator_info {
 	int			deepsleep_id;

 	/* Regulator register address.*/
 	uint8_t			reg_disc_reg;
 	uint8_t			disc_bit;
 	uint8_t			deepsleep_reg;

 	/* Regulator specific turn-on delay  and voltage settling time*/
 	int			enable_uv_per_us;
 	int			change_uv_per_us;

 	/* Used by regulator core */
 	struct regulator_desc	desc;
 };

 struct rc5t583_regulator {
 	struct rc5t583_regulator_info *reg_info;

 	/* Devices */
 	struct device		*dev;
 	struct rc5t583		*mfd;
 	struct regulator_dev	*rdev;
 };

 static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
 {
 	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
 	int vsel = regulator_get_voltage_sel_regmap(rdev);
 	int curr_uV = regulator_list_voltage_linear(rdev, vsel);

 	return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
 }

 static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
 		unsigned int old_selector, unsigned int new_selector)
 {
 	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
 	int old_uV, new_uV;
 	old_uV = regulator_list_voltage_linear(rdev, old_selector);

 	if (old_uV < 0)
 		return old_uV;

 	new_uV = regulator_list_voltage_linear(rdev, new_selector);
 	if (new_uV < 0)
 		return new_uV;

 	return DIV_ROUND_UP(abs(old_uV - new_uV),
 				reg->reg_info->change_uv_per_us);
 }


 static struct regulator_ops rc5t583_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.enable_time		= rc5t583_regulator_enable_time,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.set_voltage_time_sel	= rc5t583_set_voltage_time_sel,
 };

 #define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
 		_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
 {								\
 	.reg_disc_reg	= RC5T583_REG_##_disc_reg,		\
 	.disc_bit	= _disc_bit,				\
 	.deepsleep_reg	= RC5T583_REG_##_id##DAC_DS,		\
 	.enable_uv_per_us = _enable_mv * 1000,			\
 	.change_uv_per_us = 40 * 1000,				\
 	.deepsleep_id	= RC5T583_DS_##_id,			\
 	.desc = {						\
 		.name = "rc5t583-regulator-"#_id,		\
 		.id = RC5T583_REGULATOR_##_id,			\
 		.n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \
 		.ops = &rc5t583_ops,				\
 		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\
 		.vsel_reg = RC5T583_REG_##_id##DAC,		\
 		.vsel_mask = _vout_mask,			\
 		.enable_reg = RC5T583_REG_##_en_reg,		\
 		.enable_mask = BIT(_en_bit),			\
 		.min_uV	= _min_mv * 1000,			\
 		.uV_step = _step_uV,				\
 	},							\
 }

 static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
 	RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
 	RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
 	RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
 	RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
 	RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
 	RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
 	RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
 	RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
 	RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
 	RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
 	RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
 	RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
 	RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
 	RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
 };

 static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
 {
 	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
 	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
 	struct regulator_init_data *reg_data;
 	struct regulator_config config = { };
 	struct rc5t583_regulator *reg = NULL;
 	struct rc5t583_regulator *regs;
 	struct regulator_dev *rdev;
 	struct rc5t583_regulator_info *ri;
 	int ret;
 	int id;

 	if (!pdata) {
 		dev_err(&pdev->dev, "No platform data, exiting...\n");
 		return -ENODEV;
 	}

 	regs = devm_kzalloc(&pdev->dev, RC5T583_REGULATOR_MAX *
 			sizeof(struct rc5t583_regulator), GFP_KERNEL);
 	if (!regs) {
 		dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
 		return -ENOMEM;
 	}


 	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
 		reg_data = pdata->reg_init_data[id];

 		/* No need to register if there is no regulator data */
 		if (!reg_data)
 			continue;

 		reg = &regs[id];
 		ri = &rc5t583_reg_info[id];
 		reg->reg_info = ri;
 		reg->mfd = rc5t583;
 		reg->dev = &pdev->dev;

 		if (ri->deepsleep_id == RC5T583_DS_NONE)
 			goto skip_ext_pwr_config;

 		ret = rc5t583_ext_power_req_config(rc5t583->dev,
 				ri->deepsleep_id,
 				pdata->regulator_ext_pwr_control[id],
 				pdata->regulator_deepsleep_slot[id]);
 		/*
 		 * Configuring external control is not a major issue,
 		 * just give warning.
 		 */
 		if (ret < 0)
 			dev_warn(&pdev->dev,
 				"Failed to configure ext control %d\n", id);

 skip_ext_pwr_config:
 		config.dev = &pdev->dev;
 		config.init_data = reg_data;
 		config.driver_data = reg;
 		config.regmap = rc5t583->regmap;

 		rdev = regulator_register(&ri->desc, &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "Failed to register regulator %s\n",
 						ri->desc.name);
 			ret = PTR_ERR(rdev);
 			goto clean_exit;
 		}
 		reg->rdev = rdev;
 	}
 	platform_set_drvdata(pdev, regs);
 	return 0;

 clean_exit:
 	while (--id >= 0)
 		regulator_unregister(regs[id].rdev);

 	return ret;
 }

 static int __devexit rc5t583_regulator_remove(struct platform_device *pdev)
 {
 	struct rc5t583_regulator *regs = platform_get_drvdata(pdev);
 	int id;

 	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id)
 		regulator_unregister(regs[id].rdev);
 	return 0;
 }

 static struct platform_driver rc5t583_regulator_driver = {
 	.driver	= {
 		.name	= "rc5t583-regulator",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= rc5t583_regulator_probe,
 	.remove		= __devexit_p(rc5t583_regulator_remove),
 };

 static int __init rc5t583_regulator_init(void)
 {
 	return platform_driver_register(&rc5t583_regulator_driver);
 }
 subsys_initcall(rc5t583_regulator_init);

 static void __exit rc5t583_regulator_exit(void)
 {
 	platform_driver_unregister(&rc5t583_regulator_driver);
 }
 module_exit(rc5t583_regulator_exit);

 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
 MODULE_DESCRIPTION("RC5T583 regulator driver");
 MODULE_ALIAS("platform:rc5t583-regulator");
 MODULE_LICENSE("GPL v2");
	/*
	* Regulator driver for RICOH RC5T583 power management chip.
	*
	* Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
	* Author: Laxman dewangan <ldewangan@nvidia.com>
	*
	* based on code
	* Copyright (C) 2011 RICOH COMPANY,LTD
	*
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	*
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/err.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/machine.h>
	#include <linux/gpio.h>
	#include <linux/mfd/rc5t583.h>

	struct rc5t583_regulator_info {
	int deepsleep_id;

	/* Regulator register address.*/
	uint8_t reg_disc_reg;
	uint8_t disc_bit;
	uint8_t deepsleep_reg;

	/* Regulator specific turn-on delay and voltage settling time*/
	int enable_uv_per_us;
	int change_uv_per_us;

	/* Used by regulator core */
	struct regulator_desc desc;
	};

	struct rc5t583_regulator {
	struct rc5t583_regulator_info *reg_info;

	/* Devices */
	struct device *dev;
	struct rc5t583 *mfd;
	struct regulator_dev *rdev;
	};

	static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
	{
	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
	int vsel = regulator_get_voltage_sel_regmap(rdev);
	int curr_uV = regulator_list_voltage_linear(rdev, vsel);

	return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
	}

	static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
	unsigned int old_selector, unsigned int new_selector)
	{
	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
	int old_uV, new_uV;
	old_uV = regulator_list_voltage_linear(rdev, old_selector);

	if (old_uV < 0)
	return old_uV;

	new_uV = regulator_list_voltage_linear(rdev, new_selector);
	if (new_uV < 0)
	return new_uV;

	return DIV_ROUND_UP(abs(old_uV - new_uV),
	reg->reg_info->change_uv_per_us);
	}


	static struct regulator_ops rc5t583_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.enable_time = rc5t583_regulator_enable_time,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
	};

	#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
	_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
	{ \
	.reg_disc_reg = RC5T583_REG_##_disc_reg, \
	.disc_bit = _disc_bit, \
	.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
	.enable_uv_per_us = _enable_mv * 1000, \
	.change_uv_per_us = 40 * 1000, \
	.deepsleep_id = RC5T583_DS_##_id, \
	.desc = { \
	.name = "rc5t583-regulator-"#_id, \
	.id = RC5T583_REGULATOR_##_id, \
	.n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \
	.ops = &rc5t583_ops, \
	.type = REGULATOR_VOLTAGE, \
	.owner = THIS_MODULE, \
	.vsel_reg = RC5T583_REG_##_id##DAC, \
	.vsel_mask = _vout_mask, \
	.enable_reg = RC5T583_REG_##_en_reg, \
	.enable_mask = BIT(_en_bit), \
	.min_uV = _min_mv * 1000, \
	.uV_step = _step_uV, \
	}, \
	}

	static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
	RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
	RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
	RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
	RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
	RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
	RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
	RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
	RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
	RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
	RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
	RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
	RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
	RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
	RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
	};

	static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
	{
	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
	struct regulator_init_data *reg_data;
	struct regulator_config config = { };
	struct rc5t583_regulator *reg = NULL;
	struct rc5t583_regulator *regs;
	struct regulator_dev *rdev;
	struct rc5t583_regulator_info *ri;
	int ret;
	int id;

	if (!pdata) {
	dev_err(&pdev->dev, "No platform data, exiting...\n");
	return -ENODEV;
	}

	regs = devm_kzalloc(&pdev->dev, RC5T583_REGULATOR_MAX *
	sizeof(struct rc5t583_regulator), GFP_KERNEL);
	if (!regs) {
	dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
	return -ENOMEM;
	}


	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
	reg_data = pdata->reg_init_data[id];

	/* No need to register if there is no regulator data */
	if (!reg_data)
	continue;

	reg = &regs[id];
	ri = &rc5t583_reg_info[id];
	reg->reg_info = ri;
	reg->mfd = rc5t583;
	reg->dev = &pdev->dev;

	if (ri->deepsleep_id == RC5T583_DS_NONE)
	goto skip_ext_pwr_config;

	ret = rc5t583_ext_power_req_config(rc5t583->dev,
	ri->deepsleep_id,
	pdata->regulator_ext_pwr_control[id],
	pdata->regulator_deepsleep_slot[id]);
	/*
	* Configuring external control is not a major issue,
	* just give warning.
	*/
	if (ret < 0)
	dev_warn(&pdev->dev,
	"Failed to configure ext control %d\n", id);

	skip_ext_pwr_config:
	config.dev = &pdev->dev;
	config.init_data = reg_data;
	config.driver_data = reg;
	config.regmap = rc5t583->regmap;

	rdev = regulator_register(&ri->desc, &config);
	if (IS_ERR(rdev)) {
	dev_err(&pdev->dev, "Failed to register regulator %s\n",
	ri->desc.name);
	ret = PTR_ERR(rdev);
	goto clean_exit;
	}
	reg->rdev = rdev;
	}
	platform_set_drvdata(pdev, regs);
	return 0;

	clean_exit:
	while (--id >= 0)
	regulator_unregister(regs[id].rdev);

	return ret;
	}

	static int __devexit rc5t583_regulator_remove(struct platform_device *pdev)
	{
	struct rc5t583_regulator *regs = platform_get_drvdata(pdev);
	int id;

	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id)
	regulator_unregister(regs[id].rdev);
	return 0;
	}

	static struct platform_driver rc5t583_regulator_driver = {
	.driver = {
	.name = "rc5t583-regulator",
	.owner = THIS_MODULE,
	},
	.probe = rc5t583_regulator_probe,
	.remove = __devexit_p(rc5t583_regulator_remove),
	};

	static int __init rc5t583_regulator_init(void)
	{
	return platform_driver_register(&rc5t583_regulator_driver);
	}
	subsys_initcall(rc5t583_regulator_init);

	static void __exit rc5t583_regulator_exit(void)
	{
	platform_driver_unregister(&rc5t583_regulator_driver);
	}
	module_exit(rc5t583_regulator_exit);

	MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
	MODULE_DESCRIPTION("RC5T583 regulator driver");
	MODULE_ALIAS("platform:rc5t583-regulator");
	MODULE_LICENSE("GPL v2");