usb: add clock support to r8a66597 gadget driver
Add support for the clock framework to the r8a66597 gadget driver.
This is needed to control the clock driving the USB block.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index cc0ba68..c65753f 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -1475,6 +1476,12 @@
iounmap((void *)r8a66597->reg);
free_irq(platform_get_irq(pdev, 0), r8a66597);
r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+#ifdef CONFIG_HAVE_CLK
+ if (r8a66597->pdata->on_chip) {
+ clk_disable(r8a66597->clk);
+ clk_put(r8a66597->clk);
+ }
+#endif
kfree(r8a66597);
return 0;
}
@@ -1485,6 +1492,9 @@
static int __init r8a66597_probe(struct platform_device *pdev)
{
+#ifdef CONFIG_HAVE_CLK
+ char clk_name[8];
+#endif
struct resource *res, *ires;
int irq;
void __iomem *reg = NULL;
@@ -1545,13 +1555,27 @@
r8a66597->bi_bufnum = R8A66597_BASE_BUFNUM;
+#ifdef CONFIG_HAVE_CLK
+ if (r8a66597->pdata->on_chip) {
+ snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+ r8a66597->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(r8a66597->clk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+ clk_name);
+ ret = PTR_ERR(r8a66597->clk);
+ goto clean_up;
+ }
+ clk_enable(r8a66597->clk);
+ }
+#endif
+
disable_controller(r8a66597); /* make sure controller is disabled */
ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED,
udc_name, r8a66597);
if (ret < 0) {
printk(KERN_ERR "request_irq error (%d)\n", ret);
- goto clean_up;
+ goto clean_up2;
}
INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
@@ -1586,7 +1610,7 @@
r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
GFP_KERNEL);
if (r8a66597->ep0_req == NULL)
- goto clean_up2;
+ goto clean_up3;
r8a66597->ep0_req->complete = nop_completion;
init_controller(r8a66597);
@@ -1594,8 +1618,15 @@
dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
return 0;
-clean_up2:
+clean_up3:
free_irq(irq, r8a66597);
+clean_up2:
+#ifdef CONFIG_HAVE_CLK
+ if (r8a66597->pdata->on_chip) {
+ clk_disable(r8a66597->clk);
+ clk_put(r8a66597->clk);
+ }
+#endif
clean_up:
if (r8a66597) {
if (r8a66597->ep0_req)
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index a2464bf3..7d9a325 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -23,6 +23,10 @@
#ifndef __R8A66597_H__
#define __R8A66597_H__
+#ifdef CONFIG_HAVE_CLK
+#include <linux/clk.h>
+#endif
+
#include <linux/usb/r8a66597.h>
#define R8A66597_MAX_SAMPLING 10
@@ -88,6 +92,9 @@
spinlock_t lock;
unsigned long reg;
+#ifdef CONFIG_HAVE_CLK
+ struct clk *clk;
+#endif
struct r8a66597_platdata *pdata;
struct usb_gadget gadget;