| /* |
| * AMD 76x Memory Controller kernel module |
| * (C) 2003 Linux Networx (http://lnxi.com) |
| * This file may be distributed under the terms of the |
| * GNU General Public License. |
| * |
| * Written by Thayne Harbaugh |
| * Based on work by Dan Hollis <goemon at anime dot net> and others. |
| * http://www.anime.net/~goemon/linux-ecc/ |
| * |
| * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $ |
| * |
| */ |
| |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| |
| #include <linux/slab.h> |
| |
| #include "edac_mc.h" |
| |
| |
| #define amd76x_printk(level, fmt, arg...) \ |
| edac_printk(level, "amd76x", fmt, ##arg) |
| |
| |
| #define amd76x_mc_printk(mci, level, fmt, arg...) \ |
| edac_mc_chipset_printk(mci, level, "amd76x", fmt, ##arg) |
| |
| |
| #define AMD76X_NR_CSROWS 8 |
| #define AMD76X_NR_CHANS 1 |
| #define AMD76X_NR_DIMMS 4 |
| |
| |
| /* AMD 76x register addresses - device 0 function 0 - PCI bridge */ |
| #define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b) |
| * |
| * 31:16 reserved |
| * 15:14 SERR enabled: x1=ue 1x=ce |
| * 13 reserved |
| * 12 diag: disabled, enabled |
| * 11:10 mode: dis, EC, ECC, ECC+scrub |
| * 9:8 status: x1=ue 1x=ce |
| * 7:4 UE cs row |
| * 3:0 CE cs row |
| */ |
| #define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b) |
| * |
| * 31:26 clock disable 5 - 0 |
| * 25 SDRAM init |
| * 24 reserved |
| * 23 mode register service |
| * 22:21 suspend to RAM |
| * 20 burst refresh enable |
| * 19 refresh disable |
| * 18 reserved |
| * 17:16 cycles-per-refresh |
| * 15:8 reserved |
| * 7:0 x4 mode enable 7 - 0 |
| */ |
| #define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b) |
| * |
| * 31:23 chip-select base |
| * 22:16 reserved |
| * 15:7 chip-select mask |
| * 6:3 reserved |
| * 2:1 address mode |
| * 0 chip-select enable |
| */ |
| |
| |
| struct amd76x_error_info { |
| u32 ecc_mode_status; |
| }; |
| |
| |
| enum amd76x_chips { |
| AMD761 = 0, |
| AMD762 |
| }; |
| |
| |
| struct amd76x_dev_info { |
| const char *ctl_name; |
| }; |
| |
| |
| static const struct amd76x_dev_info amd76x_devs[] = { |
| [AMD761] = {.ctl_name = "AMD761"}, |
| [AMD762] = {.ctl_name = "AMD762"}, |
| }; |
| |
| |
| /** |
| * amd76x_get_error_info - fetch error information |
| * @mci: Memory controller |
| * @info: Info to fill in |
| * |
| * Fetch and store the AMD76x ECC status. Clear pending status |
| * on the chip so that further errors will be reported |
| */ |
| |
| static void amd76x_get_error_info (struct mem_ctl_info *mci, |
| struct amd76x_error_info *info) |
| { |
| pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| &info->ecc_mode_status); |
| |
| if (info->ecc_mode_status & BIT(8)) |
| pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| (u32) BIT(8), (u32) BIT(8)); |
| |
| if (info->ecc_mode_status & BIT(9)) |
| pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| (u32) BIT(9), (u32) BIT(9)); |
| } |
| |
| |
| /** |
| * amd76x_process_error_info - Error check |
| * @mci: Memory controller |
| * @info: Previously fetched information from chip |
| * @handle_errors: 1 if we should do recovery |
| * |
| * Process the chip state and decide if an error has occurred. |
| * A return of 1 indicates an error. Also if handle_errors is true |
| * then attempt to handle and clean up after the error |
| */ |
| |
| static int amd76x_process_error_info (struct mem_ctl_info *mci, |
| struct amd76x_error_info *info, int handle_errors) |
| { |
| int error_found; |
| u32 row; |
| |
| error_found = 0; |
| |
| /* |
| * Check for an uncorrectable error |
| */ |
| if (info->ecc_mode_status & BIT(8)) { |
| error_found = 1; |
| |
| if (handle_errors) { |
| row = (info->ecc_mode_status >> 4) & 0xf; |
| edac_mc_handle_ue(mci, |
| mci->csrows[row].first_page, 0, row, |
| mci->ctl_name); |
| } |
| } |
| |
| /* |
| * Check for a correctable error |
| */ |
| if (info->ecc_mode_status & BIT(9)) { |
| error_found = 1; |
| |
| if (handle_errors) { |
| row = info->ecc_mode_status & 0xf; |
| edac_mc_handle_ce(mci, |
| mci->csrows[row].first_page, 0, 0, row, 0, |
| mci->ctl_name); |
| } |
| } |
| return error_found; |
| } |
| |
| /** |
| * amd76x_check - Poll the controller |
| * @mci: Memory controller |
| * |
| * Called by the poll handlers this function reads the status |
| * from the controller and checks for errors. |
| */ |
| |
| static void amd76x_check(struct mem_ctl_info *mci) |
| { |
| struct amd76x_error_info info; |
| debugf3("%s()\n", __func__); |
| amd76x_get_error_info(mci, &info); |
| amd76x_process_error_info(mci, &info, 1); |
| } |
| |
| |
| /** |
| * amd76x_probe1 - Perform set up for detected device |
| * @pdev; PCI device detected |
| * @dev_idx: Device type index |
| * |
| * We have found an AMD76x and now need to set up the memory |
| * controller status reporting. We configure and set up the |
| * memory controller reporting and claim the device. |
| */ |
| |
| static int amd76x_probe1(struct pci_dev *pdev, int dev_idx) |
| { |
| int rc = -ENODEV; |
| int index; |
| struct mem_ctl_info *mci = NULL; |
| enum edac_type ems_modes[] = { |
| EDAC_NONE, |
| EDAC_EC, |
| EDAC_SECDED, |
| EDAC_SECDED |
| }; |
| u32 ems; |
| u32 ems_mode; |
| |
| debugf0("%s()\n", __func__); |
| |
| pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems); |
| ems_mode = (ems >> 10) & 0x3; |
| |
| mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS); |
| |
| if (mci == NULL) { |
| rc = -ENOMEM; |
| goto fail; |
| } |
| |
| debugf0("%s(): mci = %p\n", __func__, mci); |
| |
| mci->pdev = pdev; |
| mci->mtype_cap = MEM_FLAG_RDDR; |
| |
| mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; |
| mci->edac_cap = ems_mode ? |
| (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE; |
| |
| mci->mod_name = EDAC_MOD_STR; |
| mci->mod_ver = "$Revision: 1.4.2.5 $"; |
| mci->ctl_name = amd76x_devs[dev_idx].ctl_name; |
| mci->edac_check = amd76x_check; |
| mci->ctl_page_to_phys = NULL; |
| |
| for (index = 0; index < mci->nr_csrows; index++) { |
| struct csrow_info *csrow = &mci->csrows[index]; |
| u32 mba; |
| u32 mba_base; |
| u32 mba_mask; |
| u32 dms; |
| |
| /* find the DRAM Chip Select Base address and mask */ |
| pci_read_config_dword(mci->pdev, |
| AMD76X_MEM_BASE_ADDR + (index * 4), |
| &mba); |
| |
| if (!(mba & BIT(0))) |
| continue; |
| |
| mba_base = mba & 0xff800000UL; |
| mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL; |
| |
| pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS, |
| &dms); |
| |
| csrow->first_page = mba_base >> PAGE_SHIFT; |
| csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT; |
| csrow->last_page = csrow->first_page + csrow->nr_pages - 1; |
| csrow->page_mask = mba_mask >> PAGE_SHIFT; |
| csrow->grain = csrow->nr_pages << PAGE_SHIFT; |
| csrow->mtype = MEM_RDDR; |
| csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN; |
| csrow->edac_mode = ems_modes[ems_mode]; |
| } |
| |
| /* clear counters */ |
| pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) (0x3 << 8), |
| (u32) (0x3 << 8)); |
| |
| if (edac_mc_add_mc(mci)) { |
| debugf3("%s(): failed edac_mc_add_mc()\n", __func__); |
| goto fail; |
| } |
| |
| /* get this far and it's successful */ |
| debugf3("%s(): success\n", __func__); |
| return 0; |
| |
| fail: |
| if (mci != NULL) |
| edac_mc_free(mci); |
| return rc; |
| } |
| |
| /* returns count (>= 0), or negative on error */ |
| static int __devinit amd76x_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| debugf0("%s()\n", __func__); |
| |
| /* don't need to call pci_device_enable() */ |
| return amd76x_probe1(pdev, ent->driver_data); |
| } |
| |
| |
| /** |
| * amd76x_remove_one - driver shutdown |
| * @pdev: PCI device being handed back |
| * |
| * Called when the driver is unloaded. Find the matching mci |
| * structure for the device then delete the mci and free the |
| * resources. |
| */ |
| |
| static void __devexit amd76x_remove_one(struct pci_dev *pdev) |
| { |
| struct mem_ctl_info *mci; |
| |
| debugf0("%s()\n", __func__); |
| |
| if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) |
| return; |
| if (edac_mc_del_mc(mci)) |
| return; |
| edac_mc_free(mci); |
| } |
| |
| |
| static const struct pci_device_id amd76x_pci_tbl[] __devinitdata = { |
| {PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| AMD762}, |
| {PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| AMD761}, |
| {0,} /* 0 terminated list. */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl); |
| |
| |
| static struct pci_driver amd76x_driver = { |
| .name = EDAC_MOD_STR, |
| .probe = amd76x_init_one, |
| .remove = __devexit_p(amd76x_remove_one), |
| .id_table = amd76x_pci_tbl, |
| }; |
| |
| static int __init amd76x_init(void) |
| { |
| return pci_register_driver(&amd76x_driver); |
| } |
| |
| static void __exit amd76x_exit(void) |
| { |
| pci_unregister_driver(&amd76x_driver); |
| } |
| |
| module_init(amd76x_init); |
| module_exit(amd76x_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); |
| MODULE_DESCRIPTION("MC support for AMD 76x memory controllers"); |