ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers
Add support to sysfs to the wan and bluetooth subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index ebeed58..2d48033 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -225,15 +225,35 @@
keys mask, and allows one to modify it.
-Bluetooth -- /proc/acpi/ibm/bluetooth
--------------------------------------
+Bluetooth
+---------
-This feature shows the presence and current state of a Bluetooth
-device. If Bluetooth is installed, the following commands can be used:
+procfs: /proc/acpi/ibm/bluetooth
+sysfs device attribute: bluetooth/enable
+
+This feature shows the presence and current state of a ThinkPad
+Bluetooth device in the internal ThinkPad CDC slot.
+
+Procfs notes:
+
+If Bluetooth is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/bluetooth
echo disable > /proc/acpi/ibm/bluetooth
+Sysfs notes:
+
+ If the Bluetooth CDC card is installed, it can be enabled /
+ disabled through the "bluetooth/enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables Bluetooth / Bluetooth is disabled
+ 1: enables Bluetooth / Bluetooth is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class.
+
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
@@ -874,23 +894,42 @@
would be the safest choice, though).
-EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
----------------------------------------
+EXPERIMENTAL: WAN
+-----------------
+
+procfs: /proc/acpi/ibm/wan
+sysfs device attribute: wwan/enable
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
-This feature shows the presence and current state of a WAN (Sierra
-Wireless EV-DO) device. If WAN is installed, the following commands can
-be used:
+This feature shows the presence and current state of a W-WAN (Sierra
+Wireless EV-DO) device.
+
+It was tested on a Lenovo Thinkpad X60. It should probably work on other
+Thinkpad models which come with this module installed.
+
+Procfs notes:
+
+If the W-WAN card is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/wan
echo disable > /proc/acpi/ibm/wan
-It was tested on a Lenovo Thinkpad X60. It should probably work on other
-Thinkpad models which come with this module installed.
+Sysfs notes:
+
+ If the W-WAN card is installed, it can be enabled /
+ disabled through the "wwan/enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables WWAN card / WWAN card is disabled
+ 1: enables WWAN card / WWAN card is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class.
Multiple Commands, Module Parameters
------------------------------------