ASoC: mx27vis: retrieve gpio numbers from platform_data
Rather than including mach/iomux-mx27.h to define gpio numbers and set
up the pins, the patch moves all these into machine code and has the
gpio numbers passed to driver via platform_data. As the result, we
can remove the mach/iomux-mx27.h inclusion from driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f264ddd..5627229 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -33,6 +33,7 @@
#include <linux/dma-mapping.h>
#include <linux/leds.h>
#include <linux/memblock.h>
+#include <linux/platform_data/asoc-mx27vis.h>
#include <media/soc_camera.h>
#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
@@ -58,6 +59,11 @@
#define EXPBOARD_BIT1 (GPIO_PORTD + 27)
#define EXPBOARD_BIT0 (GPIO_PORTD + 28)
+#define AMP_GAIN_0 (GPIO_PORTF + 9)
+#define AMP_GAIN_1 (GPIO_PORTF + 8)
+#define AMP_MUTE_SDL (GPIO_PORTE + 5)
+#define AMP_MUTE_SDR (GPIO_PORTF + 7)
+
static const int visstrim_m10_pins[] __initconst = {
/* UART1 (console) */
PE12_PF_UART1_TXD,
@@ -139,6 +145,11 @@
EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+ /* Audio AMP control */
+ AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
+ AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
+ AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
+ AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
};
static struct gpio visstrim_m10_version_gpios[] = {
@@ -166,6 +177,26 @@
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "usbotg_cs",
},
+ {
+ .gpio = AMP_GAIN_0,
+ .flags = GPIOF_DIR_OUT,
+ .label = "amp-gain-0",
+ },
+ {
+ .gpio = AMP_GAIN_1,
+ .flags = GPIOF_DIR_OUT,
+ .label = "amp-gain-1",
+ },
+ {
+ .gpio = AMP_MUTE_SDL,
+ .flags = GPIOF_DIR_OUT,
+ .label = "amp-mute-sdl",
+ },
+ {
+ .gpio = AMP_MUTE_SDR,
+ .flags = GPIOF_DIR_OUT,
+ .label = "amp-mute-sdr",
+ },
};
/* Camera */
@@ -405,6 +436,14 @@
.flags = IMX_SSI_DMA | IMX_SSI_SYN,
};
+/* Audio */
+static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
+ .amp_gain0_gpio = AMP_GAIN_0,
+ .amp_gain1_gpio = AMP_GAIN_1,
+ .amp_mutel_gpio = AMP_MUTE_SDL,
+ .amp_muter_gpio = AMP_MUTE_SDR,
+};
+
static void __init visstrim_m10_revision(void)
{
int exp_version = 0;
@@ -463,7 +502,8 @@
imx27_add_fec(NULL);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
+ imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
+ sizeof(snd_mx27vis_pdata));
platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
&iclink_tvp5150, sizeof(iclink_tvp5150));
gpio_led_register_device(0, &visstrim_m10_led_data);
diff --git a/include/linux/platform_data/asoc-mx27vis.h b/include/linux/platform_data/asoc-mx27vis.h
new file mode 100644
index 0000000..409adcd
--- /dev/null
+++ b/include/linux/platform_data/asoc-mx27vis.h
@@ -0,0 +1,11 @@
+#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H
+#define __PLATFORM_DATA_ASOC_MX27VIS_H
+
+struct snd_mx27vis_platform_data {
+ int amp_gain0_gpio;
+ int amp_gain1_gpio;
+ int amp_mutel_gpio;
+ int amp_muter_gpio;
+};
+
+#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */
diff --git a/sound/soc/fsl/mx27vis-aic32x4.c b/sound/soc/fsl/mx27vis-aic32x4.c
index f6d04ad..2b76877 100644
--- a/sound/soc/fsl/mx27vis-aic32x4.c
+++ b/sound/soc/fsl/mx27vis-aic32x4.c
@@ -26,13 +26,13 @@
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/platform_data/asoc-mx27vis.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
-#include <mach/iomux-mx27.h>
#include "../codecs/tlv320aic32x4.h"
#include "imx-ssi.h"
@@ -41,20 +41,12 @@
#define MX27VIS_AMP_GAIN 0
#define MX27VIS_AMP_MUTE 1
-#define MX27VIS_PIN_G0 (GPIO_PORTF + 9)
-#define MX27VIS_PIN_G1 (GPIO_PORTF + 8)
-#define MX27VIS_PIN_SDL (GPIO_PORTE + 5)
-#define MX27VIS_PIN_SDR (GPIO_PORTF + 7)
-
static int mx27vis_amp_gain;
static int mx27vis_amp_mute;
-
-static const int mx27vis_amp_pins[] = {
- MX27VIS_PIN_G0 | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_G1 | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_SDL | GPIO_GPIO | GPIO_OUT,
- MX27VIS_PIN_SDR | GPIO_GPIO | GPIO_OUT,
-};
+static int mx27vis_amp_gain0_gpio;
+static int mx27vis_amp_gain1_gpio;
+static int mx27vis_amp_mutel_gpio;
+static int mx27vis_amp_muter_gpio;
static int mx27vis_aic32x4_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -109,13 +101,13 @@
switch (reg) {
case MX27VIS_AMP_GAIN:
- gpio_set_value(MX27VIS_PIN_G0, value & 1);
- gpio_set_value(MX27VIS_PIN_G1, value >> 1);
+ gpio_set_value(mx27vis_amp_gain0_gpio, value & 1);
+ gpio_set_value(mx27vis_amp_gain1_gpio, value >> 1);
mx27vis_amp_gain = value;
break;
case MX27VIS_AMP_MUTE:
- gpio_set_value(MX27VIS_PIN_SDL, value & 1);
- gpio_set_value(MX27VIS_PIN_SDR, value >> 1);
+ gpio_set_value(mx27vis_amp_mutel_gpio, value & 1);
+ gpio_set_value(mx27vis_amp_muter_gpio, value >> 1);
mx27vis_amp_mute = value;
break;
}
@@ -190,8 +182,19 @@
static int __devinit mx27vis_aic32x4_probe(struct platform_device *pdev)
{
+ struct snd_mx27vis_platform_data *pdata = pdev->dev.platform_data;
int ret;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ mx27vis_amp_gain0_gpio = pdata->amp_gain0_gpio;
+ mx27vis_amp_gain1_gpio = pdata->amp_gain1_gpio;
+ mx27vis_amp_mutel_gpio = pdata->amp_mutel_gpio;
+ mx27vis_amp_muter_gpio = pdata->amp_muter_gpio;
+
mx27vis_aic32x4.dev = &pdev->dev;
ret = snd_soc_register_card(&mx27vis_aic32x4);
if (ret) {
@@ -213,11 +216,6 @@
IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
);
- ret = mxc_gpio_setup_multiple_pins(mx27vis_amp_pins,
- ARRAY_SIZE(mx27vis_amp_pins), "MX27VIS_AMP");
- if (ret)
- printk(KERN_ERR "ASoC: unable to setup gpios\n");
-
return ret;
}