IB/ipath: core driver header files
ipath_common.h and ips_common.h contain definitions shared between
userspace and the kernel.
ipath_kernel.h is the core driver header file.
ipath_debug.h contains mask values used for controlling driver debugging.
ipath_registers.h contains bitmask definitions used in chip registers.
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
new file mode 100644
index 0000000..159d0ae
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -0,0 +1,884 @@
+#ifndef _IPATH_KERNEL_H
+#define _IPATH_KERNEL_H
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This header file is the base header file for infinipath kernel code
+ * ipath_user.h serves a similar purpose for user code.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "ipath_common.h"
+#include "ipath_debug.h"
+#include "ipath_registers.h"
+
+/* only s/w major version of InfiniPath we can handle */
+#define IPATH_CHIP_VERS_MAJ 2U
+
+/* don't care about this except printing */
+#define IPATH_CHIP_VERS_MIN 0U
+
+/* temporary, maybe always */
+extern struct infinipath_stats ipath_stats;
+
+#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
+
+struct ipath_portdata {
+ void **port_rcvegrbuf;
+ dma_addr_t *port_rcvegrbuf_phys;
+ /* rcvhdrq base, needs mmap before useful */
+ void *port_rcvhdrq;
+ /* kernel virtual address where hdrqtail is updated */
+ u64 *port_rcvhdrtail_kvaddr;
+ /* page * used for uaddr */
+ struct page *port_rcvhdrtail_pagep;
+ /*
+ * temp buffer for expected send setup, allocated at open, instead
+ * of each setup call
+ */
+ void *port_tid_pg_list;
+ /* when waiting for rcv or pioavail */
+ wait_queue_head_t port_wait;
+ /*
+ * rcvegr bufs base, physical, must fit
+ * in 44 bits so 32 bit programs mmap64 44 bit works)
+ */
+ dma_addr_t port_rcvegr_phys;
+ /* mmap of hdrq, must fit in 44 bits */
+ dma_addr_t port_rcvhdrq_phys;
+ /*
+ * the actual user address that we ipath_mlock'ed, so we can
+ * ipath_munlock it at close
+ */
+ unsigned long port_rcvhdrtail_uaddr;
+ /*
+ * number of opens on this instance (0 or 1; ignoring forks, dup,
+ * etc. for now)
+ */
+ int port_cnt;
+ /*
+ * how much space to leave at start of eager TID entries for
+ * protocol use, on each TID
+ */
+ /* instead of calculating it */
+ unsigned port_port;
+ /* chip offset of PIO buffers for this port */
+ u32 port_piobufs;
+ /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
+ u32 port_rcvegrbuf_chunks;
+ /* how many egrbufs per chunk */
+ u32 port_rcvegrbufs_perchunk;
+ /* order for port_rcvegrbuf_pages */
+ size_t port_rcvegrbuf_size;
+ /* rcvhdrq size (for freeing) */
+ size_t port_rcvhdrq_size;
+ /* next expected TID to check when looking for free */
+ u32 port_tidcursor;
+ /* next expected TID to check */
+ unsigned long port_flag;
+ /* WAIT_RCV that timed out, no interrupt */
+ u32 port_rcvwait_to;
+ /* WAIT_PIO that timed out, no interrupt */
+ u32 port_piowait_to;
+ /* WAIT_RCV already happened, no wait */
+ u32 port_rcvnowait;
+ /* WAIT_PIO already happened, no wait */
+ u32 port_pionowait;
+ /* total number of rcvhdrqfull errors */
+ u32 port_hdrqfull;
+ /* pid of process using this port */
+ pid_t port_pid;
+ /* same size as task_struct .comm[] */
+ char port_comm[16];
+ /* pkeys set by this use of this port */
+ u16 port_pkeys[4];
+ /* so file ops can get at unit */
+ struct ipath_devdata *port_dd;
+};
+
+struct sk_buff;
+
+/*
+ * control information for layered drivers
+ */
+struct _ipath_layer {
+ void *l_arg;
+};
+
+/* Verbs layer interface */
+struct _verbs_layer {
+ void *l_arg;
+ struct timer_list l_timer;
+};
+
+struct ipath_devdata {
+ struct list_head ipath_list;
+
+ struct ipath_kregs const *ipath_kregs;
+ struct ipath_cregs const *ipath_cregs;
+
+ /* mem-mapped pointer to base of chip regs */
+ u64 __iomem *ipath_kregbase;
+ /* end of mem-mapped chip space; range checking */
+ u64 __iomem *ipath_kregend;
+ /* physical address of chip for io_remap, etc. */
+ unsigned long ipath_physaddr;
+ /* base of memory alloced for ipath_kregbase, for free */
+ u64 *ipath_kregalloc;
+ /*
+ * version of kregbase that doesn't have high bits set (for 32 bit
+ * programs, so mmap64 44 bit works)
+ */
+ u64 __iomem *ipath_kregvirt;
+ /*
+ * virtual address where port0 rcvhdrqtail updated for this unit.
+ * only written to by the chip, not the driver.
+ */
+ volatile __le64 *ipath_hdrqtailptr;
+ dma_addr_t ipath_dma_addr;
+ /* ipath_cfgports pointers */
+ struct ipath_portdata **ipath_pd;
+ /* sk_buffs used by port 0 eager receive queue */
+ struct sk_buff **ipath_port0_skbs;
+ /* kvirt address of 1st 2k pio buffer */
+ void __iomem *ipath_pio2kbase;
+ /* kvirt address of 1st 4k pio buffer */
+ void __iomem *ipath_pio4kbase;
+ /*
+ * points to area where PIOavail registers will be DMA'ed.
+ * Has to be on a page of it's own, because the page will be
+ * mapped into user program space. This copy is *ONLY* ever
+ * written by DMA, not by the driver! Need a copy per device
+ * when we get to multiple devices
+ */
+ volatile __le64 *ipath_pioavailregs_dma;
+ /* physical address where updates occur */
+ dma_addr_t ipath_pioavailregs_phys;
+ struct _ipath_layer ipath_layer;
+ /* setup intr */
+ int (*ipath_f_intrsetup)(struct ipath_devdata *);
+ /* setup on-chip bus config */
+ int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
+ /* hard reset chip */
+ int (*ipath_f_reset)(struct ipath_devdata *);
+ int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
+ size_t);
+ void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
+ void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
+ size_t);
+ void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
+ int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
+ int (*ipath_f_early_init)(struct ipath_devdata *);
+ void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
+ void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
+ u32, unsigned long);
+ void (*ipath_f_tidtemplate)(struct ipath_devdata *);
+ void (*ipath_f_cleanup)(struct ipath_devdata *);
+ void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
+ /* fill out chip-specific fields */
+ int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
+ struct _verbs_layer verbs_layer;
+ /* total dwords sent (summed from counter) */
+ u64 ipath_sword;
+ /* total dwords rcvd (summed from counter) */
+ u64 ipath_rword;
+ /* total packets sent (summed from counter) */
+ u64 ipath_spkts;
+ /* total packets rcvd (summed from counter) */
+ u64 ipath_rpkts;
+ /* ipath_statusp initially points to this. */
+ u64 _ipath_status;
+ /* GUID for this interface, in network order */
+ __be64 ipath_guid;
+ /*
+ * aggregrate of error bits reported since last cleared, for
+ * limiting of error reporting
+ */
+ ipath_err_t ipath_lasterror;
+ /*
+ * aggregrate of error bits reported since last cleared, for
+ * limiting of hwerror reporting
+ */
+ ipath_err_t ipath_lasthwerror;
+ /*
+ * errors masked because they occur too fast, also includes errors
+ * that are always ignored (ipath_ignorederrs)
+ */
+ ipath_err_t ipath_maskederrs;
+ /* time in jiffies at which to re-enable maskederrs */
+ unsigned long ipath_unmasktime;
+ /*
+ * errors always ignored (masked), at least for a given
+ * chip/device, because they are wrong or not useful
+ */
+ ipath_err_t ipath_ignorederrs;
+ /* count of egrfull errors, combined for all ports */
+ u64 ipath_last_tidfull;
+ /* for ipath_qcheck() */
+ u64 ipath_lastport0rcv_cnt;
+ /* template for writing TIDs */
+ u64 ipath_tidtemplate;
+ /* value to write to free TIDs */
+ u64 ipath_tidinvalid;
+ /* PE-800 rcv interrupt setup */
+ u64 ipath_rhdrhead_intr_off;
+
+ /* size of memory at ipath_kregbase */
+ u32 ipath_kregsize;
+ /* number of registers used for pioavail */
+ u32 ipath_pioavregs;
+ /* IPATH_POLL, etc. */
+ u32 ipath_flags;
+ /* ipath_flags sma is waiting for */
+ u32 ipath_sma_state_wanted;
+ /* last buffer for user use, first buf for kernel use is this
+ * index. */
+ u32 ipath_lastport_piobuf;
+ /* is a stats timer active */
+ u32 ipath_stats_timer_active;
+ /* dwords sent read from counter */
+ u32 ipath_lastsword;
+ /* dwords received read from counter */
+ u32 ipath_lastrword;
+ /* sent packets read from counter */
+ u32 ipath_lastspkts;
+ /* received packets read from counter */
+ u32 ipath_lastrpkts;
+ /* pio bufs allocated per port */
+ u32 ipath_pbufsport;
+ /*
+ * number of ports configured as max; zero is set to number chip
+ * supports, less gives more pio bufs/port, etc.
+ */
+ u32 ipath_cfgports;
+ /* port0 rcvhdrq head offset */
+ u32 ipath_port0head;
+ /* count of port 0 hdrqfull errors */
+ u32 ipath_p0_hdrqfull;
+
+ /*
+ * (*cfgports) used to suppress multiple instances of same
+ * port staying stuck at same point
+ */
+ u32 *ipath_lastrcvhdrqtails;
+ /*
+ * (*cfgports) used to suppress multiple instances of same
+ * port staying stuck at same point
+ */
+ u32 *ipath_lastegrheads;
+ /*
+ * index of last piobuffer we used. Speeds up searching, by
+ * starting at this point. Doesn't matter if multiple cpu's use and
+ * update, last updater is only write that matters. Whenever it
+ * wraps, we update shadow copies. Need a copy per device when we
+ * get to multiple devices
+ */
+ u32 ipath_lastpioindex;
+ /* max length of freezemsg */
+ u32 ipath_freezelen;
+ /*
+ * consecutive times we wanted a PIO buffer but were unable to
+ * get one
+ */
+ u32 ipath_consec_nopiobuf;
+ /*
+ * hint that we should update ipath_pioavailshadow before
+ * looking for a PIO buffer
+ */
+ u32 ipath_upd_pio_shadow;
+ /* so we can rewrite it after a chip reset */
+ u32 ipath_pcibar0;
+ /* so we can rewrite it after a chip reset */
+ u32 ipath_pcibar1;
+ /* sequential tries for SMA send and no bufs */
+ u32 ipath_nosma_bufs;
+ /* duration (seconds) ipath_nosma_bufs set */
+ u32 ipath_nosma_secs;
+
+ /* HT/PCI Vendor ID (here for NodeInfo) */
+ u16 ipath_vendorid;
+ /* HT/PCI Device ID (here for NodeInfo) */
+ u16 ipath_deviceid;
+ /* offset in HT config space of slave/primary interface block */
+ u8 ipath_ht_slave_off;
+ /* for write combining settings */
+ unsigned long ipath_wc_cookie;
+ /* ref count for each pkey */
+ atomic_t ipath_pkeyrefs[4];
+ /* shadow copy of all exptids physaddr; used only by funcsim */
+ u64 *ipath_tidsimshadow;
+ /* shadow copy of struct page *'s for exp tid pages */
+ struct page **ipath_pageshadow;
+ /* lock to workaround chip bug 9437 */
+ spinlock_t ipath_tid_lock;
+
+ /*
+ * IPATH_STATUS_*,
+ * this address is mapped readonly into user processes so they can
+ * get status cheaply, whenever they want.
+ */
+ u64 *ipath_statusp;
+ /* freeze msg if hw error put chip in freeze */
+ char *ipath_freezemsg;
+ /* pci access data structure */
+ struct pci_dev *pcidev;
+ struct cdev *cdev;
+ struct class_device *class_dev;
+ /* timer used to prevent stats overflow, error throttling, etc. */
+ struct timer_list ipath_stats_timer;
+ /* check for stale messages in rcv queue */
+ /* only allow one intr at a time. */
+ unsigned long ipath_rcv_pending;
+
+ /*
+ * Shadow copies of registers; size indicates read access size.
+ * Most of them are readonly, but some are write-only register,
+ * where we manipulate the bits in the shadow copy, and then write
+ * the shadow copy to infinipath.
+ *
+ * We deliberately make most of these 32 bits, since they have
+ * restricted range. For any that we read, we won't to generate 32
+ * bit accesses, since Opteron will generate 2 separate 32 bit HT
+ * transactions for a 64 bit read, and we want to avoid unnecessary
+ * HT transactions.
+ */
+
+ /* This is the 64 bit group */
+
+ /*
+ * shadow of pioavail, check to be sure it's large enough at
+ * init time.
+ */
+ unsigned long ipath_pioavailshadow[8];
+ /* shadow of kr_gpio_out, for rmw ops */
+ u64 ipath_gpio_out;
+ /* kr_revision shadow */
+ u64 ipath_revision;
+ /*
+ * shadow of ibcctrl, for interrupt handling of link changes,
+ * etc.
+ */
+ u64 ipath_ibcctrl;
+ /*
+ * last ibcstatus, to suppress "duplicate" status change messages,
+ * mostly from 2 to 3
+ */
+ u64 ipath_lastibcstat;
+ /* hwerrmask shadow */
+ ipath_err_t ipath_hwerrmask;
+ /* interrupt config reg shadow */
+ u64 ipath_intconfig;
+ /* kr_sendpiobufbase value */
+ u64 ipath_piobufbase;
+
+ /* these are the "32 bit" regs */
+
+ /*
+ * number of GUIDs in the flash for this interface; may need some
+ * rethinking for setting on other ifaces
+ */
+ u32 ipath_nguid;
+ /*
+ * the following two are 32-bit bitmasks, but {test,clear,set}_bit
+ * all expect bit fields to be "unsigned long"
+ */
+ /* shadow kr_rcvctrl */
+ unsigned long ipath_rcvctrl;
+ /* shadow kr_sendctrl */
+ unsigned long ipath_sendctrl;
+
+ /* value we put in kr_rcvhdrcnt */
+ u32 ipath_rcvhdrcnt;
+ /* value we put in kr_rcvhdrsize */
+ u32 ipath_rcvhdrsize;
+ /* value we put in kr_rcvhdrentsize */
+ u32 ipath_rcvhdrentsize;
+ /* offset of last entry in rcvhdrq */
+ u32 ipath_hdrqlast;
+ /* kr_portcnt value */
+ u32 ipath_portcnt;
+ /* kr_pagealign value */
+ u32 ipath_palign;
+ /* number of "2KB" PIO buffers */
+ u32 ipath_piobcnt2k;
+ /* size in bytes of "2KB" PIO buffers */
+ u32 ipath_piosize2k;
+ /* number of "4KB" PIO buffers */
+ u32 ipath_piobcnt4k;
+ /* size in bytes of "4KB" PIO buffers */
+ u32 ipath_piosize4k;
+ /* kr_rcvegrbase value */
+ u32 ipath_rcvegrbase;
+ /* kr_rcvegrcnt value */
+ u32 ipath_rcvegrcnt;
+ /* kr_rcvtidbase value */
+ u32 ipath_rcvtidbase;
+ /* kr_rcvtidcnt value */
+ u32 ipath_rcvtidcnt;
+ /* kr_sendregbase */
+ u32 ipath_sregbase;
+ /* kr_userregbase */
+ u32 ipath_uregbase;
+ /* kr_counterregbase */
+ u32 ipath_cregbase;
+ /* shadow the control register contents */
+ u32 ipath_control;
+ /* shadow the gpio output contents */
+ u32 ipath_extctrl;
+ /* PCI revision register (HTC rev on FPGA) */
+ u32 ipath_pcirev;
+
+ /* chip address space used by 4k pio buffers */
+ u32 ipath_4kalign;
+ /* The MTU programmed for this unit */
+ u32 ipath_ibmtu;
+ /*
+ * The max size IB packet, included IB headers that we can send.
+ * Starts same as ipath_piosize, but is affected when ibmtu is
+ * changed, or by size of eager buffers
+ */
+ u32 ipath_ibmaxlen;
+ /*
+ * ibmaxlen at init time, limited by chip and by receive buffer
+ * size. Not changed after init.
+ */
+ u32 ipath_init_ibmaxlen;
+ /* size of each rcvegrbuffer */
+ u32 ipath_rcvegrbufsize;
+ /* width (2,4,8,16,32) from HT config reg */
+ u32 ipath_htwidth;
+ /* HT speed (200,400,800,1000) from HT config */
+ u32 ipath_htspeed;
+ /* ports waiting for PIOavail intr */
+ unsigned long ipath_portpiowait;
+ /*
+ * number of sequential ibcstatus change for polling active/quiet
+ * (i.e., link not coming up).
+ */
+ u32 ipath_ibpollcnt;
+ /* low and high portions of MSI capability/vector */
+ u32 ipath_msi_lo;
+ /* saved after PCIe init for restore after reset */
+ u32 ipath_msi_hi;
+ /* MSI data (vector) saved for restore */
+ u16 ipath_msi_data;
+ /* MLID programmed for this instance */
+ u16 ipath_mlid;
+ /* LID programmed for this instance */
+ u16 ipath_lid;
+ /* list of pkeys programmed; 0 if not set */
+ u16 ipath_pkeys[4];
+ /* ASCII serial number, from flash */
+ u8 ipath_serial[12];
+ /* human readable board version */
+ u8 ipath_boardversion[80];
+ /* chip major rev, from ipath_revision */
+ u8 ipath_majrev;
+ /* chip minor rev, from ipath_revision */
+ u8 ipath_minrev;
+ /* board rev, from ipath_revision */
+ u8 ipath_boardrev;
+ /* unit # of this chip, if present */
+ int ipath_unit;
+ /* saved for restore after reset */
+ u8 ipath_pci_cacheline;
+ /* LID mask control */
+ u8 ipath_lmc;
+};
+
+extern volatile __le64 *ipath_port0_rcvhdrtail;
+extern dma_addr_t ipath_port0_rcvhdrtail_dma;
+
+#define IPATH_PORT0_RCVHDRTAIL_SIZE PAGE_SIZE
+
+extern struct list_head ipath_dev_list;
+extern spinlock_t ipath_devs_lock;
+extern struct ipath_devdata *ipath_lookup(int unit);
+
+extern u16 ipath_layer_rcv_opcode;
+extern int ipath_verbs_registered;
+extern int __ipath_layer_intr(struct ipath_devdata *, u32);
+extern int ipath_layer_intr(struct ipath_devdata *, u32);
+extern int __ipath_layer_rcv(struct ipath_devdata *, void *,
+ struct sk_buff *);
+extern int __ipath_layer_rcv_lid(struct ipath_devdata *, void *);
+extern int __ipath_verbs_piobufavail(struct ipath_devdata *);
+extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32);
+
+void ipath_layer_add(struct ipath_devdata *);
+void ipath_layer_del(struct ipath_devdata *);
+
+int ipath_init_chip(struct ipath_devdata *, int);
+int ipath_enable_wc(struct ipath_devdata *dd);
+void ipath_disable_wc(struct ipath_devdata *dd);
+int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp);
+void ipath_shutdown_device(struct ipath_devdata *);
+
+struct file_operations;
+int ipath_cdev_init(int minor, char *name, struct file_operations *fops,
+ struct cdev **cdevp, struct class_device **class_devp);
+void ipath_cdev_cleanup(struct cdev **cdevp,
+ struct class_device **class_devp);
+
+int ipath_diag_init(void);
+void ipath_diag_cleanup(void);
+void ipath_diag_bringup_link(struct ipath_devdata *);
+
+extern wait_queue_head_t ipath_sma_state_wait;
+
+int ipath_user_add(struct ipath_devdata *dd);
+void ipath_user_del(struct ipath_devdata *dd);
+
+struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
+
+extern int ipath_diag_inuse;
+
+irqreturn_t ipath_intr(int irq, void *devid, struct pt_regs *regs);
+void ipath_decode_err(char *buf, size_t blen, ipath_err_t err);
+#if __IPATH_INFO || __IPATH_DBG
+extern const char *ipath_ibcstatus_str[];
+#endif
+
+/* clean up any per-chip chip-specific stuff */
+void ipath_chip_cleanup(struct ipath_devdata *);
+/* clean up any chip type-specific stuff */
+void ipath_chip_done(void);
+
+/* check to see if we have to force ordering for write combining */
+int ipath_unordered_wc(void);
+
+void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
+ unsigned cnt);
+
+int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
+void ipath_free_pddata(struct ipath_devdata *, u32, int);
+
+int ipath_parse_ushort(const char *str, unsigned short *valp);
+
+int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
+void ipath_set_ib_lstate(struct ipath_devdata *, int);
+void ipath_kreceive(struct ipath_devdata *);
+int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
+int ipath_reset_device(int);
+void ipath_get_faststats(unsigned long);
+
+/* for use in system calls, where we want to know device type, etc. */
+#define port_fp(fp) ((struct ipath_portdata *) (fp)->private_data)
+
+/*
+ * values for ipath_flags
+ */
+/* The chip is up and initted */
+#define IPATH_INITTED 0x2
+ /* set if any user code has set kr_rcvhdrsize */
+#define IPATH_RCVHDRSZ_SET 0x4
+ /* The chip is present and valid for accesses */
+#define IPATH_PRESENT 0x8
+ /* HT link0 is only 8 bits wide, ignore upper byte crc
+ * errors, etc. */
+#define IPATH_8BIT_IN_HT0 0x10
+ /* HT link1 is only 8 bits wide, ignore upper byte crc
+ * errors, etc. */
+#define IPATH_8BIT_IN_HT1 0x20
+ /* The link is down */
+#define IPATH_LINKDOWN 0x40
+ /* The link level is up (0x11) */
+#define IPATH_LINKINIT 0x80
+ /* The link is in the armed (0x21) state */
+#define IPATH_LINKARMED 0x100
+ /* The link is in the active (0x31) state */
+#define IPATH_LINKACTIVE 0x200
+ /* link current state is unknown */
+#define IPATH_LINKUNK 0x400
+ /* no IB cable, or no device on IB cable */
+#define IPATH_NOCABLE 0x4000
+ /* Supports port zero per packet receive interrupts via
+ * GPIO */
+#define IPATH_GPIO_INTR 0x8000
+ /* uses the coded 4byte TID, not 8 byte */
+#define IPATH_4BYTE_TID 0x10000
+ /* packet/word counters are 32 bit, else those 4 counters
+ * are 64bit */
+#define IPATH_32BITCOUNTERS 0x20000
+ /* can miss port0 rx interrupts */
+#define IPATH_POLL_RX_INTR 0x40000
+#define IPATH_DISABLED 0x80000 /* administratively disabled */
+
+/* portdata flag bit offsets */
+ /* waiting for a packet to arrive */
+#define IPATH_PORT_WAITING_RCV 2
+ /* waiting for a PIO buffer to be available */
+#define IPATH_PORT_WAITING_PIO 3
+
+/* free up any allocated data at closes */
+void ipath_free_data(struct ipath_portdata *dd);
+int ipath_waitfor_mdio_cmdready(struct ipath_devdata *);
+int ipath_waitfor_complete(struct ipath_devdata *, ipath_kreg, u64, u64 *);
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
+/* init PE-800-specific func */
+void ipath_init_pe800_funcs(struct ipath_devdata *);
+/* init HT-400-specific func */
+void ipath_init_ht400_funcs(struct ipath_devdata *);
+void ipath_get_guid(struct ipath_devdata *);
+u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
+
+/*
+ * number of words used for protocol header if not set by ipath_userinit();
+ */
+#define IPATH_DFLT_RCVHDRSIZE 9
+
+#define IPATH_MDIO_CMD_WRITE 1
+#define IPATH_MDIO_CMD_READ 2
+#define IPATH_MDIO_CLD_DIV 25 /* to get 2.5 Mhz mdio clock */
+#define IPATH_MDIO_CMDVALID 0x40000000 /* bit 30 */
+#define IPATH_MDIO_DATAVALID 0x80000000 /* bit 31 */
+#define IPATH_MDIO_CTRL_STD 0x0
+
+static inline u64 ipath_mdio_req(int cmd, int dev, int reg, int data)
+{
+ return (((u64) IPATH_MDIO_CLD_DIV) << 32) |
+ (cmd << 26) |
+ (dev << 21) |
+ (reg << 16) |
+ (data & 0xFFFF);
+}
+
+ /* signal and fifo status, in bank 31 */
+#define IPATH_MDIO_CTRL_XGXS_REG_8 0x8
+ /* controls loopback, redundancy */
+#define IPATH_MDIO_CTRL_8355_REG_1 0x10
+ /* premph, encdec, etc. */
+#define IPATH_MDIO_CTRL_8355_REG_2 0x11
+ /* Kchars, etc. */
+#define IPATH_MDIO_CTRL_8355_REG_6 0x15
+#define IPATH_MDIO_CTRL_8355_REG_9 0x18
+#define IPATH_MDIO_CTRL_8355_REG_10 0x1D
+
+int ipath_get_user_pages(unsigned long, size_t, struct page **);
+int ipath_get_user_pages_nocopy(unsigned long, struct page **);
+void ipath_release_user_pages(struct page **, size_t);
+void ipath_release_user_pages_on_close(struct page **, size_t);
+int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
+int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
+
+/* these are used for the registers that vary with port */
+void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
+ unsigned, u64);
+u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
+ unsigned);
+
+/*
+ * We could have a single register get/put routine, that takes a group type,
+ * but this is somewhat clearer and cleaner. It also gives us some error
+ * checking. 64 bit register reads should always work, but are inefficient
+ * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
+ * so we use kreg32 wherever possible. User register and counter register
+ * reads are always 32 bit reads, so only one form of those routines.
+ */
+
+/*
+ * At the moment, none of the s-registers are writable, so no
+ * ipath_write_sreg(), and none of the c-registers are writable, so no
+ * ipath_write_creg().
+ */
+
+/**
+ * ipath_read_ureg32 - read 32-bit virtualized per-port register
+ * @dd: device
+ * @regno: register number
+ * @port: port number
+ *
+ * Return the contents of a register that is virtualized to be per port.
+ * Prints a debug message and returns -1 on errors (not distinguishable from
+ * valid contents at runtime; we may add a separate error variable at some
+ * point).
+ *
+ * This is normally not used by the kernel, but may be for debugging, and
+ * has a different implementation than user mode, which is why it's not in
+ * _common.h.
+ */
+static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
+ ipath_ureg regno, int port)
+{
+ if (!dd->ipath_kregbase)
+ return 0;
+
+ return readl(regno + (u64 __iomem *)
+ (dd->ipath_uregbase +
+ (char __iomem *)dd->ipath_kregbase +
+ dd->ipath_palign * port));
+}
+
+/**
+ * ipath_write_ureg - write 32-bit virtualized per-port register
+ * @dd: device
+ * @regno: register number
+ * @value: value
+ * @port: port
+ *
+ * Write the contents of a register that is virtualized to be per port.
+ */
+static inline void ipath_write_ureg(const struct ipath_devdata *dd,
+ ipath_ureg regno, u64 value, int port)
+{
+ u64 __iomem *ubase = (u64 __iomem *)
+ (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
+ dd->ipath_palign * port);
+ if (dd->ipath_kregbase)
+ writeq(value, &ubase[regno]);
+}
+
+static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
+ ipath_kreg regno)
+{
+ if (!dd->ipath_kregbase)
+ return -1;
+ return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
+}
+
+static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
+ ipath_kreg regno)
+{
+ if (!dd->ipath_kregbase)
+ return -1;
+
+ return readq(&dd->ipath_kregbase[regno]);
+}
+
+static inline void ipath_write_kreg(const struct ipath_devdata *dd,
+ ipath_kreg regno, u64 value)
+{
+ if (dd->ipath_kregbase)
+ writeq(value, &dd->ipath_kregbase[regno]);
+}
+
+static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
+ ipath_sreg regno)
+{
+ if (!dd->ipath_kregbase)
+ return 0;
+
+ return readq(regno + (u64 __iomem *)
+ (dd->ipath_cregbase +
+ (char __iomem *)dd->ipath_kregbase));
+}
+
+static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
+ ipath_sreg regno)
+{
+ if (!dd->ipath_kregbase)
+ return 0;
+ return readl(regno + (u64 __iomem *)
+ (dd->ipath_cregbase +
+ (char __iomem *)dd->ipath_kregbase));
+}
+
+/*
+ * sysfs interface.
+ */
+
+struct device_driver;
+
+extern const char ipath_core_version[];
+
+int ipath_driver_create_group(struct device_driver *);
+void ipath_driver_remove_group(struct device_driver *);
+
+int ipath_device_create_group(struct device *, struct ipath_devdata *);
+void ipath_device_remove_group(struct device *, struct ipath_devdata *);
+int ipath_expose_reset(struct device *);
+
+int ipath_init_ipathfs(void);
+void ipath_exit_ipathfs(void);
+int ipathfs_add_device(struct ipath_devdata *);
+int ipathfs_remove_device(struct ipath_devdata *);
+
+/*
+ * Flush write combining store buffers (if present) and perform a write
+ * barrier.
+ */
+#if defined(CONFIG_X86_64)
+#define ipath_flush_wc() asm volatile("sfence" ::: "memory")
+#else
+#define ipath_flush_wc() wmb()
+#endif
+
+extern unsigned ipath_debug; /* debugging bit mask */
+
+const char *ipath_get_unit_name(int unit);
+
+extern struct mutex ipath_mutex;
+
+#define IPATH_DRV_NAME "ipath_core"
+#define IPATH_MAJOR 233
+#define IPATH_SMA_MINOR 128
+#define IPATH_DIAG_MINOR 129
+#define IPATH_NMINORS 130
+
+#define ipath_dev_err(dd,fmt,...) \
+ do { \
+ const struct ipath_devdata *__dd = (dd); \
+ if (__dd->pcidev) \
+ dev_err(&__dd->pcidev->dev, "%s: " fmt, \
+ ipath_get_unit_name(__dd->ipath_unit), \
+ ##__VA_ARGS__); \
+ else \
+ printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
+ ipath_get_unit_name(__dd->ipath_unit), \
+ ##__VA_ARGS__); \
+ } while (0)
+
+#if _IPATH_DEBUGGING
+
+# define __IPATH_DBG_WHICH(which,fmt,...) \
+ do { \
+ if(unlikely(ipath_debug&(which))) \
+ printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
+ __func__,##__VA_ARGS__); \
+ } while(0)
+
+# define ipath_dbg(fmt,...) \
+ __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
+# define ipath_cdbg(which,fmt,...) \
+ __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
+
+#else /* ! _IPATH_DEBUGGING */
+
+# define ipath_dbg(fmt,...)
+# define ipath_cdbg(which,fmt,...)
+
+#endif /* _IPATH_DEBUGGING */
+
+#endif /* _IPATH_KERNEL_H */