| /* |
| * Copyright (C) 2004 IBM Corporation |
| * |
| * Authors: |
| * Leendert van Doorn <leendert@watson.ibm.com> |
| * Dave Safford <safford@watson.ibm.com> |
| * Reiner Sailer <sailer@watson.ibm.com> |
| * Kylene Hall <kjhall@us.ibm.com> |
| * |
| * Maintained by: <tpmdd-devel@lists.sourceforge.net> |
| * |
| * Device driver for TCG/TCPA TPM (trusted platform module). |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2 of the |
| * License. |
| * |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include "tpm.h" |
| |
| /* National definitions */ |
| enum tpm_nsc_addr{ |
| TPM_NSC_IRQ = 0x07, |
| TPM_NSC_BASE0_HI = 0x60, |
| TPM_NSC_BASE0_LO = 0x61, |
| TPM_NSC_BASE1_HI = 0x62, |
| TPM_NSC_BASE1_LO = 0x63 |
| }; |
| |
| enum tpm_nsc_index { |
| NSC_LDN_INDEX = 0x07, |
| NSC_SID_INDEX = 0x20, |
| NSC_LDC_INDEX = 0x30, |
| NSC_DIO_INDEX = 0x60, |
| NSC_CIO_INDEX = 0x62, |
| NSC_IRQ_INDEX = 0x70, |
| NSC_ITS_INDEX = 0x71 |
| }; |
| |
| enum tpm_nsc_status_loc { |
| NSC_STATUS = 0x01, |
| NSC_COMMAND = 0x01, |
| NSC_DATA = 0x00 |
| }; |
| |
| /* status bits */ |
| enum tpm_nsc_status { |
| NSC_STATUS_OBF = 0x01, /* output buffer full */ |
| NSC_STATUS_IBF = 0x02, /* input buffer full */ |
| NSC_STATUS_F0 = 0x04, /* F0 */ |
| NSC_STATUS_A2 = 0x08, /* A2 */ |
| NSC_STATUS_RDY = 0x10, /* ready to receive command */ |
| NSC_STATUS_IBR = 0x20 /* ready to receive data */ |
| }; |
| |
| /* command bits */ |
| enum tpm_nsc_cmd_mode { |
| NSC_COMMAND_NORMAL = 0x01, /* normal mode */ |
| NSC_COMMAND_EOC = 0x03, |
| NSC_COMMAND_CANCEL = 0x22 |
| }; |
| /* |
| * Wait for a certain status to appear |
| */ |
| static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data) |
| { |
| unsigned long stop; |
| |
| /* status immediately available check */ |
| *data = inb(chip->vendor.base + NSC_STATUS); |
| if ((*data & mask) == val) |
| return 0; |
| |
| /* wait for status */ |
| stop = jiffies + 10 * HZ; |
| do { |
| msleep(TPM_TIMEOUT); |
| *data = inb(chip->vendor.base + 1); |
| if ((*data & mask) == val) |
| return 0; |
| } |
| while (time_before(jiffies, stop)); |
| |
| return -EBUSY; |
| } |
| |
| static int nsc_wait_for_ready(struct tpm_chip *chip) |
| { |
| int status; |
| unsigned long stop; |
| |
| /* status immediately available check */ |
| status = inb(chip->vendor.base + NSC_STATUS); |
| if (status & NSC_STATUS_OBF) |
| status = inb(chip->vendor.base + NSC_DATA); |
| if (status & NSC_STATUS_RDY) |
| return 0; |
| |
| /* wait for status */ |
| stop = jiffies + 100; |
| do { |
| msleep(TPM_TIMEOUT); |
| status = inb(chip->vendor.base + NSC_STATUS); |
| if (status & NSC_STATUS_OBF) |
| status = inb(chip->vendor.base + NSC_DATA); |
| if (status & NSC_STATUS_RDY) |
| return 0; |
| } |
| while (time_before(jiffies, stop)); |
| |
| dev_info(&chip->dev, "wait for ready failed\n"); |
| return -EBUSY; |
| } |
| |
| |
| static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) |
| { |
| u8 *buffer = buf; |
| u8 data, *p; |
| u32 size; |
| __be32 *native_size; |
| |
| if (count < 6) |
| return -EIO; |
| |
| if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) { |
| dev_err(&chip->dev, "F0 timeout\n"); |
| return -EIO; |
| } |
| if ((data = |
| inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) { |
| dev_err(&chip->dev, "not in normal mode (0x%x)\n", |
| data); |
| return -EIO; |
| } |
| |
| /* read the whole packet */ |
| for (p = buffer; p < &buffer[count]; p++) { |
| if (wait_for_stat |
| (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) { |
| dev_err(&chip->dev, |
| "OBF timeout (while reading data)\n"); |
| return -EIO; |
| } |
| if (data & NSC_STATUS_F0) |
| break; |
| *p = inb(chip->vendor.base + NSC_DATA); |
| } |
| |
| if ((data & NSC_STATUS_F0) == 0 && |
| (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) { |
| dev_err(&chip->dev, "F0 not set\n"); |
| return -EIO; |
| } |
| if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) { |
| dev_err(&chip->dev, |
| "expected end of command(0x%x)\n", data); |
| return -EIO; |
| } |
| |
| native_size = (__force __be32 *) (buf + 2); |
| size = be32_to_cpu(*native_size); |
| |
| if (count < size) |
| return -EIO; |
| |
| return size; |
| } |
| |
| static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) |
| { |
| u8 data; |
| int i; |
| |
| /* |
| * If we hit the chip with back to back commands it locks up |
| * and never set IBF. Hitting it with this "hammer" seems to |
| * fix it. Not sure why this is needed, we followed the flow |
| * chart in the manual to the letter. |
| */ |
| outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); |
| |
| if (nsc_wait_for_ready(chip) != 0) |
| return -EIO; |
| |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { |
| dev_err(&chip->dev, "IBF timeout\n"); |
| return -EIO; |
| } |
| |
| outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND); |
| if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) { |
| dev_err(&chip->dev, "IBR timeout\n"); |
| return -EIO; |
| } |
| |
| for (i = 0; i < count; i++) { |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { |
| dev_err(&chip->dev, |
| "IBF timeout (while writing data)\n"); |
| return -EIO; |
| } |
| outb(buf[i], chip->vendor.base + NSC_DATA); |
| } |
| |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { |
| dev_err(&chip->dev, "IBF timeout\n"); |
| return -EIO; |
| } |
| outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND); |
| |
| return count; |
| } |
| |
| static void tpm_nsc_cancel(struct tpm_chip *chip) |
| { |
| outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); |
| } |
| |
| static u8 tpm_nsc_status(struct tpm_chip *chip) |
| { |
| return inb(chip->vendor.base + NSC_STATUS); |
| } |
| |
| static bool tpm_nsc_req_canceled(struct tpm_chip *chip, u8 status) |
| { |
| return (status == NSC_STATUS_RDY); |
| } |
| |
| static const struct tpm_class_ops tpm_nsc = { |
| .recv = tpm_nsc_recv, |
| .send = tpm_nsc_send, |
| .cancel = tpm_nsc_cancel, |
| .status = tpm_nsc_status, |
| .req_complete_mask = NSC_STATUS_OBF, |
| .req_complete_val = NSC_STATUS_OBF, |
| .req_canceled = tpm_nsc_req_canceled, |
| }; |
| |
| static struct platform_device *pdev = NULL; |
| |
| static void tpm_nsc_remove(struct device *dev) |
| { |
| struct tpm_chip *chip = dev_get_drvdata(dev); |
| |
| tpm_chip_unregister(chip); |
| release_region(chip->vendor.base, 2); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(tpm_nsc_pm, tpm_pm_suspend, tpm_pm_resume); |
| |
| static struct platform_driver nsc_drv = { |
| .driver = { |
| .name = "tpm_nsc", |
| .pm = &tpm_nsc_pm, |
| }, |
| }; |
| |
| static int __init init_nsc(void) |
| { |
| int rc = 0; |
| int lo, hi, err; |
| int nscAddrBase = TPM_ADDR; |
| struct tpm_chip *chip; |
| unsigned long base; |
| |
| /* verify that it is a National part (SID) */ |
| if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) { |
| nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)| |
| (tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE); |
| if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) |
| return -ENODEV; |
| } |
| |
| err = platform_driver_register(&nsc_drv); |
| if (err) |
| return err; |
| |
| hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI); |
| lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO); |
| base = (hi<<8) | lo; |
| |
| /* enable the DPM module */ |
| tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01); |
| |
| pdev = platform_device_alloc("tpm_nscl0", -1); |
| if (!pdev) { |
| rc = -ENOMEM; |
| goto err_unreg_drv; |
| } |
| |
| pdev->num_resources = 0; |
| pdev->dev.driver = &nsc_drv.driver; |
| pdev->dev.release = tpm_nsc_remove; |
| |
| if ((rc = platform_device_add(pdev)) < 0) |
| goto err_put_dev; |
| |
| if (request_region(base, 2, "tpm_nsc0") == NULL ) { |
| rc = -EBUSY; |
| goto err_del_dev; |
| } |
| |
| chip = tpmm_chip_alloc(&pdev->dev, &tpm_nsc); |
| if (IS_ERR(chip)) { |
| rc = -ENODEV; |
| goto err_rel_reg; |
| } |
| |
| rc = tpm_chip_register(chip); |
| if (rc) |
| goto err_rel_reg; |
| |
| dev_dbg(&pdev->dev, "NSC TPM detected\n"); |
| dev_dbg(&pdev->dev, |
| "NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n", |
| tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20), |
| tpm_read_index(nscAddrBase,0x27)); |
| dev_dbg(&pdev->dev, |
| "NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n", |
| tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25), |
| tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28)); |
| dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n", |
| (tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61)); |
| dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n", |
| (tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63)); |
| dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n", |
| tpm_read_index(nscAddrBase,0x70)); |
| dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n", |
| tpm_read_index(nscAddrBase,0x71)); |
| dev_dbg(&pdev->dev, |
| "NSC DMA channel select0 0x%x, select1 0x%x\n", |
| tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75)); |
| dev_dbg(&pdev->dev, |
| "NSC Config " |
| "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", |
| tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1), |
| tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3), |
| tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5), |
| tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7), |
| tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9)); |
| |
| dev_info(&pdev->dev, |
| "NSC TPM revision %d\n", |
| tpm_read_index(nscAddrBase, 0x27) & 0x1F); |
| |
| chip->vendor.base = base; |
| |
| return 0; |
| |
| err_rel_reg: |
| release_region(base, 2); |
| err_del_dev: |
| platform_device_del(pdev); |
| err_put_dev: |
| platform_device_put(pdev); |
| err_unreg_drv: |
| platform_driver_unregister(&nsc_drv); |
| return rc; |
| } |
| |
| static void __exit cleanup_nsc(void) |
| { |
| if (pdev) { |
| tpm_nsc_remove(&pdev->dev); |
| platform_device_unregister(pdev); |
| } |
| |
| platform_driver_unregister(&nsc_drv); |
| } |
| |
| module_init(init_nsc); |
| module_exit(cleanup_nsc); |
| |
| MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); |
| MODULE_DESCRIPTION("TPM Driver"); |
| MODULE_VERSION("2.0"); |
| MODULE_LICENSE("GPL"); |