hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.
Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index fc5df76..4d29351 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -42,7 +42,7 @@
This driver implements support for the hardware monitoring capabilities of the
SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
-temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
+temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
automatically.
@@ -105,6 +105,7 @@
in4: V1_IN 0V - 1.5V
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
+ in7: Vtrip (+1.5V) 0V - 1.99V
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
@@ -217,10 +218,10 @@
vrm RW Voltage regulator module version
number.
-in[0-6]_input RO Measured voltage in millivolts.
-in[0-6]_min RW Low limit for voltage input.
-in[0-6]_max RW High limit for voltage input.
-in[0-6]_alarm RO Voltage input alarm. Returns 1 if
+in[0-7]_input RO Measured voltage in millivolts.
+in[0-7]_min RW Low limit for voltage input.
+in[0-7]_max RW High limit for voltage input.
+in[0-7]_alarm RO Voltage input alarm. Returns 1 if
voltage input is or went outside the
associated min-max range, 0 otherwise.
@@ -324,3 +325,4 @@
pwm5 opt opt
fan6 opt opt
pwm6 opt opt
+in7 yes