[MIPS] Sibyte: Finish conversion to modern time APIs.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index fe11fed..9ef5462 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -100,6 +100,7 @@
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
;
}
}
@@ -144,79 +145,7 @@
.name = "timer",
};
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, timer_cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- ;
- }
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- __raw_writeq(0, timer_cfg);
- __raw_writeq(delta, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
- return 0;
-}
-
-struct clock_event_device sibyte_hpt_clockevent = {
- .name = "sb1250-counter",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .set_mode = sibyte_set_mode,
- .set_next_event = sibyte_next_event,
- .shift = 32,
- .irq = 0,
-};
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- struct clock_event_device *cd = &sibyte_hpt_clockevent;
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
- .handler = sibyte_counter_handler,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
-static void __init sb1250_clockevent_init(void)
+void __cpuinit sb1250_clockevent_init(void)
{
struct clock_event_device *cd = &sibyte_hpt_clockevent;
unsigned int cpu = smp_processor_id();
@@ -249,12 +178,6 @@
clockevents_register_device(cd);
}
-void __init plat_time_init(void)
-{
- sb1250_clocksource_init();
- sb1250_clockevent_init();
-}
-
/*
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
@@ -267,3 +190,26 @@
return SB1250_HPT_VALUE - count;
}
+
+struct clocksource bcm1250_clocksource = {
+ .name = "MIPS",
+ .rating = 200,
+ .read = sb1250_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 32,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1250_clocksource;
+
+ clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+ clocksource_register(cs);
+}
+
+void __init plat_time_init(void)
+{
+ sb1250_clocksource_init();
+ sb1250_clockevent_init();
+}