[PATCH] irq-flags: usb: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index acb3c3d..1c459ff 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1653,13 +1653,13 @@
pullup(udc, 0);
/* request UDC and maybe VBUS irqs */
- if (request_irq(AT91_ID_UDP, at91_udc_irq, SA_INTERRUPT, driver_name, udc)) {
+ if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) {
DBG("request irq %d failed\n", AT91_ID_UDP);
retval = -EBUSY;
goto fail1;
}
if (udc->board.vbus_pin > 0) {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq, SA_INTERRUPT, driver_name, udc)) {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
free_irq(AT91_ID_UDP, udc);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 3f827de..7cf2999 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1916,7 +1916,7 @@
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
- if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
+ if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/,
driver_name, dev) != 0) {
DBG(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 0d3424e..bb22b7e 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2107,7 +2107,7 @@
/* irq setup after old hardware state is cleaned up */
retval =
- request_irq(IRQ_USBINTR, lh7a40x_udc_irq, SA_INTERRUPT, driver_name,
+ request_irq(IRQ_USBINTR, lh7a40x_udc_irq, IRQF_DISABLED, driver_name,
dev);
if (retval != 0) {
DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 570996d..0924323 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2895,7 +2895,7 @@
goto done;
}
- if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev)
+ if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev)
!= 0) {
ERROR (dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 0d642ac..f28ebbc 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2818,7 +2818,7 @@
/* USB general purpose IRQ: ep0, state changes, dma, etc */
status = request_irq(pdev->resource[1].start, omap_udc_irq,
- SA_SAMPLE_RANDOM, driver_name, udc);
+ IRQF_SAMPLE_RANDOM, driver_name, udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[1].start, status);
@@ -2827,7 +2827,7 @@
/* USB "non-iso" IRQ (PIO for all but ep0) */
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
- SA_SAMPLE_RANDOM, "omap_udc pio", udc);
+ IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[2].start, status);
@@ -2835,7 +2835,7 @@
}
#ifdef USE_ISO
status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
- SA_INTERRUPT, "omap_udc iso", udc);
+ IRQF_DISABLED, "omap_udc iso", udc);
if (status != 0) {
ERR("can't get irq %ld, err %d\n",
pdev->resource[3].start, status);
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index c88650d..fff027d 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2521,7 +2521,7 @@
/* irq setup after old hardware state is cleaned up */
retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
- SA_INTERRUPT, driver_name, dev);
+ IRQF_DISABLED, driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, IRQ_USB, retval);
@@ -2533,7 +2533,7 @@
if (machine_is_lubbock()) {
retval = request_irq(LUBBOCK_USB_DISC_IRQ,
lubbock_vbus_irq,
- SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
@@ -2544,7 +2544,7 @@
}
retval = request_irq(LUBBOCK_USB_IRQ,
lubbock_vbus_irq,
- SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",