V4L/DVB (10453): af9015: add MC44S803 support
Add MC44S803 support to AF9015 driver.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index c6b2399..f0ba8b0 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -27,9 +27,7 @@
#include "qt1010.h"
#include "tda18271.h"
#include "mxl5005s.h"
-#if 0
-#include "mc44s80x.h"
-#endif
+#include "mc44s803.h"
static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -280,6 +278,21 @@
req.data = &msg[i+1].buf[0];
ret = af9015_ctrl_msg(d, &req);
i += 2;
+ } else if (msg[i].flags & I2C_M_RD) {
+ ret = -EINVAL;
+ if (msg[i].addr ==
+ af9015_af9013_config[0].demod_address)
+ goto error;
+ else
+ req.cmd = READ_I2C;
+ req.i2c_addr = msg[i].addr;
+ req.addr = addr;
+ req.mbox = mbox;
+ req.addr_len = addr_len;
+ req.data_len = msg[i].len;
+ req.data = &msg[i].buf[0];
+ ret = af9015_ctrl_msg(d, &req);
+ i += 1;
} else {
if (msg[i].addr ==
af9015_af9013_config[0].demod_address)
@@ -939,7 +952,6 @@
switch (val) {
case AF9013_TUNER_ENV77H11D5:
case AF9013_TUNER_MT2060:
- case AF9013_TUNER_MC44S803:
case AF9013_TUNER_QT1010:
case AF9013_TUNER_UNKNOWN:
case AF9013_TUNER_MT2060_2:
@@ -952,6 +964,10 @@
case AF9013_TUNER_MXL5005R:
af9015_af9013_config[i].rf_spec_inv = 0;
break;
+ case AF9013_TUNER_MC44S803:
+ af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
+ af9015_af9013_config[i].rf_spec_inv = 1;
+ break;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1139,6 +1155,11 @@
.AgcMasterByte = 0x00,
};
+static struct mc44s803_config af9015_mc44s803_config = {
+ .i2c_address = 0xc0,
+ .dig_out = 1,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
@@ -1183,15 +1204,8 @@
DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MC44S803:
-#if 0
- ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap)
- == NULL ? -ENODEV : 0;
-#else
- ret = -ENODEV;
- info("Freescale MC44S803 tuner found but no driver for that" \
- "tuner. Look at the Linuxtv.org for tuner driver" \
- "status.");
-#endif
+ ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
+ &af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_UNKNOWN:
default: