staging: __FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/staging/epl/Edrv8139.c b/drivers/staging/epl/Edrv8139.c
index 88ab4a4..296354a 100644
--- a/drivers/staging/epl/Edrv8139.c
+++ b/drivers/staging/epl/Edrv8139.c
@@ -391,19 +391,19 @@
// register PCI driver
iResult = pci_register_driver(&EdrvDriver);
if (iResult != 0) {
- printk("%s pci_register_driver failed with %d\n", __FUNCTION__,
+ printk("%s pci_register_driver failed with %d\n", __func__,
iResult);
Ret = kEplNoResource;
goto Exit;
}
if (EdrvInstance_l.m_pPciDev == NULL) {
- printk("%s m_pPciDev=NULL\n", __FUNCTION__);
+ printk("%s m_pPciDev=NULL\n", __func__);
Ret = kEplNoResource;
goto Exit;
}
// read MAC address from controller
- printk("%s local MAC = ", __FUNCTION__);
+ printk("%s local MAC = ", __func__);
for (iResult = 0; iResult < 6; iResult++) {
pEdrvInitParam_p->m_abMyMacAddr[iResult] =
EDRV_REGB_READ((EDRV_REGDW_IDR0 + iResult));
@@ -434,7 +434,7 @@
{
// unregister PCI driver
- printk("%s calling pci_unregister_driver()\n", __FUNCTION__);
+ printk("%s calling pci_unregister_driver()\n", __func__);
pci_unregister_driver(&EdrvDriver);
return kEplSuccessful;
@@ -621,7 +621,7 @@
EDRV_REGDW_READ((EDRV_REGDW_TSD0 +
(EdrvInstance_l.m_uiCurTxDesc *
sizeof(DWORD))));
- printk("%s InvOp TSD%u = 0x%08lX", __FUNCTION__,
+ printk("%s InvOp TSD%u = 0x%08lX", __func__,
EdrvInstance_l.m_uiCurTxDesc, dwTemp);
printk(" Cmd = 0x%02X\n",
(WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
@@ -646,7 +646,7 @@
dwTemp =
EDRV_REGDW_READ((EDRV_REGDW_TSAD0 +
(EdrvInstance_l.m_uiCurTxDesc * sizeof(DWORD))));
-// printk("%s TSAD%u = 0x%08lX", __FUNCTION__, EdrvInstance_l.m_uiCurTxDesc, dwTemp);
+// printk("%s TSAD%u = 0x%08lX", __func__, EdrvInstance_l.m_uiCurTxDesc, dwTemp);
// start transmission
EDRV_REGDW_WRITE((EDRV_REGDW_TSD0 +
@@ -786,7 +786,7 @@
if (EdrvInstance_l.m_pbTxBuf == NULL) {
printk("%s Tx buffers currently not allocated\n",
- __FUNCTION__);
+ __func__);
goto Exit;
}
// read transmit status
@@ -842,7 +842,7 @@
if (EdrvInstance_l.m_pbRxBuf == NULL) {
printk("%s Rx buffers currently not allocated\n",
- __FUNCTION__);
+ __func__);
goto Exit;
}
// read current offset in receive buffer
@@ -944,7 +944,7 @@
DWORD dwTemp;
if (EdrvInstance_l.m_pPciDev != NULL) { // Edrv is already connected to a PCI device
- printk("%s device %s discarded\n", __FUNCTION__,
+ printk("%s device %s discarded\n", __func__,
pci_name(pPciDev));
iResult = -ENODEV;
goto Exit;
@@ -953,7 +953,7 @@
if (pPciDev->revision >= 0x20) {
printk
("%s device %s is an enhanced 8139C+ version, which is not supported\n",
- __FUNCTION__, pci_name(pPciDev));
+ __func__, pci_name(pPciDev));
iResult = -ENODEV;
goto Exit;
}
@@ -961,7 +961,7 @@
EdrvInstance_l.m_pPciDev = pPciDev;
// enable device
- printk("%s enable device\n", __FUNCTION__);
+ printk("%s enable device\n", __func__);
iResult = pci_enable_device(pPciDev);
if (iResult != 0) {
goto Exit;
@@ -972,13 +972,13 @@
goto Exit;
}
- printk("%s request regions\n", __FUNCTION__);
+ printk("%s request regions\n", __func__);
iResult = pci_request_regions(pPciDev, DRV_NAME);
if (iResult != 0) {
goto Exit;
}
- printk("%s ioremap\n", __FUNCTION__);
+ printk("%s ioremap\n", __func__);
EdrvInstance_l.m_pIoAddr =
ioremap(pci_resource_start(pPciDev, 1),
pci_resource_len(pPciDev, 1));
@@ -987,11 +987,11 @@
goto Exit;
}
// enable PCI busmaster
- printk("%s enable busmaster\n", __FUNCTION__);
+ printk("%s enable busmaster\n", __func__);
pci_set_master(pPciDev);
// reset controller
- printk("%s reset controller\n", __FUNCTION__);
+ printk("%s reset controller\n", __func__);
EDRV_REGB_WRITE(EDRV_REGB_COMMAND, EDRV_REGB_COMMAND_RST);
// wait until reset has finished
@@ -1008,20 +1008,20 @@
dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TCR);
if (((dwTemp & EDRV_REGDW_TCR_VER_MASK) != EDRV_REGDW_TCR_VER_C)
&& ((dwTemp & EDRV_REGDW_TCR_VER_MASK) != EDRV_REGDW_TCR_VER_D)) { // unsupported chip
- printk("%s Unsupported chip! TCR = 0x%08lX\n", __FUNCTION__,
+ printk("%s Unsupported chip! TCR = 0x%08lX\n", __func__,
dwTemp);
iResult = -ENODEV;
goto Exit;
}
// disable interrupts
- printk("%s disable interrupts\n", __FUNCTION__);
+ printk("%s disable interrupts\n", __func__);
EDRV_REGW_WRITE(EDRV_REGW_INT_MASK, 0);
// acknowledge all pending interrupts
EDRV_REGW_WRITE(EDRV_REGW_INT_STATUS,
EDRV_REGW_READ(EDRV_REGW_INT_STATUS));
// install interrupt handler
- printk("%s install interrupt handler\n", __FUNCTION__);
+ printk("%s install interrupt handler\n", __func__);
iResult =
request_irq(pPciDev->irq, TgtEthIsr, IRQF_SHARED,
DRV_NAME /*pPciDev->dev.name */ , pPciDev);
@@ -1031,16 +1031,16 @@
/*
// unlock configuration registers
- printk("%s unlock configuration registers\n", __FUNCTION__);
+ printk("%s unlock configuration registers\n", __func__);
EDRV_REGB_WRITE(EDRV_REGB_CMD9346, EDRV_REGB_CMD9346_UNLOCK);
// check if user specified a MAC address
- printk("%s check specified MAC address\n", __FUNCTION__);
+ printk("%s check specified MAC address\n", __func__);
for (iResult = 0; iResult < 6; iResult++)
{
if (EdrvInstance_l.m_InitParam.m_abMyMacAddr[iResult] != 0)
{
- printk("%s set local MAC address\n", __FUNCTION__);
+ printk("%s set local MAC address\n", __func__);
// write this MAC address to controller
EDRV_REGDW_WRITE(EDRV_REGDW_IDR0,
le32_to_cpu(*((DWORD*)&EdrvInstance_l.m_InitParam.m_abMyMacAddr[0])));
@@ -1059,7 +1059,7 @@
*/
// allocate buffers
- printk("%s allocate buffers\n", __FUNCTION__);
+ printk("%s allocate buffers\n", __func__);
EdrvInstance_l.m_pbTxBuf =
pci_alloc_consistent(pPciDev, EDRV_TX_BUFFER_SIZE,
&EdrvInstance_l.m_pTxBufDma);
@@ -1076,7 +1076,7 @@
goto Exit;
}
// reset pointers for Tx buffers
- printk("%s reset pointers fo Tx buffers\n", __FUNCTION__);
+ printk("%s reset pointers fo Tx buffers\n", __func__);
EDRV_REGDW_WRITE(EDRV_REGDW_TSAD0, 0);
dwTemp = EDRV_REGDW_READ(EDRV_REGDW_TSAD0);
EDRV_REGDW_WRITE(EDRV_REGDW_TSAD1, 0);
@@ -1090,11 +1090,11 @@
(WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
// set pointer for receive buffer in controller
- printk("%s set pointer to Rx buffer\n", __FUNCTION__);
+ printk("%s set pointer to Rx buffer\n", __func__);
EDRV_REGDW_WRITE(EDRV_REGDW_RBSTART, EdrvInstance_l.m_pRxBufDma);
// enable transmitter and receiver
- printk("%s enable Tx and Rx", __FUNCTION__);
+ printk("%s enable Tx and Rx", __func__);
EDRV_REGB_WRITE(EDRV_REGB_COMMAND,
(EDRV_REGB_COMMAND_RE | EDRV_REGB_COMMAND_TE));
printk(" Command = 0x%02X\n",
@@ -1104,12 +1104,12 @@
EDRV_REGDW_WRITE(EDRV_REGDW_MPC, 0);
// set transmit configuration register
- printk("%s set Tx conf register", __FUNCTION__);
+ printk("%s set Tx conf register", __func__);
EDRV_REGDW_WRITE(EDRV_REGDW_TCR, EDRV_REGDW_TCR_DEF);
printk(" = 0x%08X\n", EDRV_REGDW_READ(EDRV_REGDW_TCR));
// set receive configuration register
- printk("%s set Rx conf register", __FUNCTION__);
+ printk("%s set Rx conf register", __func__);
EDRV_REGDW_WRITE(EDRV_REGDW_RCR, EDRV_REGDW_RCR_DEF);
printk(" = 0x%08X\n", EDRV_REGDW_READ(EDRV_REGDW_RCR));
@@ -1121,7 +1121,7 @@
/*
// enable transmitter and receiver
- printk("%s enable Tx and Rx", __FUNCTION__);
+ printk("%s enable Tx and Rx", __func__);
EDRV_REGB_WRITE(EDRV_REGB_COMMAND, (EDRV_REGB_COMMAND_RE | EDRV_REGB_COMMAND_TE));
printk(" Command = 0x%02X\n", (WORD) EDRV_REGB_READ(EDRV_REGB_COMMAND));
*/
@@ -1129,11 +1129,11 @@
EDRV_REGW_WRITE(EDRV_REGW_MULINT, 0);
// enable interrupts
- printk("%s enable interrupts\n", __FUNCTION__);
+ printk("%s enable interrupts\n", __func__);
EDRV_REGW_WRITE(EDRV_REGW_INT_MASK, EDRV_REGW_INT_MASK_DEF);
Exit:
- printk("%s finished with %d\n", __FUNCTION__, iResult);
+ printk("%s finished with %d\n", __func__, iResult);
return iResult;
}