Merge tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB and PHY fixes for 4.2-rc6 that resolve some reported
issues.
All of these have been in the linux-next tree for a while, full
details on the patches are in the shortlog below"
* tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
drivers/usb: Delete XHCI command timer if necessary
xhci: fix off by one error in TRB DMA address boundary check
usb: udc: core: add device_del() call to error pathway
phy: ti-pipe3: i783 workaround for SATA lockup after dpll unlock/relock
phy-sun4i-usb: Add missing EXPORT_SYMBOL_GPL for sun4i_usb_phy_set_squelch_detect
USB: sierra: add 1199:68AB device ID
usb: gadget: f_printer: actually limit the number of instances
usb: gadget: f_hid: actually limit the number of instances
usb: gadget: f_uac2: fix calculation of uac2->p_interval
usb: gadget: bdc: fix a driver crash on disconnect
usb: chipidea: ehci_init_driver is intended to call one time
USB: qcserial: Add support for Dell Wireless 5809e 4G Modem
USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 305e3df..9cf9446 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -82,6 +82,9 @@
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+ CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+ register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
This is usually a subnode of ocp2scp to which it is connected.
@@ -100,3 +103,16 @@
"sysclk",
"refclk";
};
+
+sata_phy: phy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
+ #phy-cells = <0>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8f1e25b..4a0718c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1140,6 +1140,7 @@
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
#phy-cells = <0>;
};
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index e17c539..2dad7e8 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -212,6 +212,7 @@
sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
}
+EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect);
static struct phy_ops sun4i_usb_phy_ops = {
.init = sun4i_usb_phy_init,
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 3510b81..08020dc 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -28,6 +28,8 @@
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
@@ -52,6 +54,8 @@
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
+#define SATA_PLL_SOFT_RESET BIT(18)
+
/*
* This is an Empirical value that works, need to confirm the actual
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -82,6 +86,9 @@
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
+ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
+ unsigned int dpll_reset_reg; /* reg. index within syscon */
+ bool sata_refclk_enabled;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -249,8 +256,11 @@
u32 val;
unsigned long timeout;
- /* SATA DPLL can't be powered down due to Errata i783 */
- if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
+ /* If dpll_reset_syscon is not present we wont power down SATA DPLL
+ * due to Errata i783
+ */
+ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
+ !phy->dpll_reset_syscon)
return 0;
/* PCIe doesn't have internal DPLL */
@@ -276,6 +286,14 @@
}
}
+ /* i783: SATA needs control bit toggle after PLL unlock */
+ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, 0);
+ }
+
ti_pipe3_disable_clocks(phy);
return 0;
@@ -350,6 +368,21 @@
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
+ phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pllreset");
+ if (IS_ERR(phy->dpll_reset_syscon)) {
+ dev_info(&pdev->dev,
+ "can't get syscon-pllreset, sata dpll won't idle\n");
+ phy->dpll_reset_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pllreset", 1,
+ &phy->dpll_reset_reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get pllreset reg. offset\n");
+ return -EINVAL;
+ }
+ }
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
@@ -402,10 +435,16 @@
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
- /* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
- if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
- if (!IS_ERR(phy->refclk))
+
+ /*
+ * Prevent auto-disable of refclk for SATA PHY due to Errata i783
+ */
+ if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+ if (!IS_ERR(phy->refclk)) {
clk_prepare_enable(phy->refclk);
+ phy->sata_refclk_enabled = true;
+ }
+ }
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
if (IS_ERR(generic_phy))
@@ -472,8 +511,18 @@
{
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
- if (!IS_ERR(phy->refclk))
+ if (!IS_ERR(phy->refclk)) {
clk_disable_unprepare(phy->refclk);
+ /*
+ * SATA refclk needs an additional disable as we left it
+ * on in probe to avoid Errata i783
+ */
+ if (phy->sata_refclk_enabled) {
+ clk_disable_unprepare(phy->refclk);
+ phy->sata_refclk_enabled = false;
+ }
+ }
+
if (!IS_ERR(phy->div_clk))
clk_disable_unprepare(phy->div_clk);
}
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 74fea4f..3ad48e1 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1024,7 +1024,18 @@
},
};
-module_platform_driver(ci_hdrc_driver);
+static int __init ci_hdrc_platform_register(void)
+{
+ ci_hdrc_host_driver_init();
+ return platform_driver_register(&ci_hdrc_driver);
+}
+module_init(ci_hdrc_platform_register);
+
+static void __exit ci_hdrc_platform_unregister(void)
+{
+ platform_driver_unregister(&ci_hdrc_driver);
+}
+module_exit(ci_hdrc_platform_unregister);
MODULE_ALIAS("platform:ci_hdrc");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 6cf87b8..7161439 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -249,9 +249,12 @@
rdrv->name = "host";
ci->roles[CI_ROLE_HOST] = rdrv;
+ return 0;
+}
+
+void ci_hdrc_host_driver_init(void)
+{
ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
-
- return 0;
}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
index 5707bf3..0f12f13 100644
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -5,6 +5,7 @@
int ci_hdrc_host_init(struct ci_hdrc *ci);
void ci_hdrc_host_destroy(struct ci_hdrc *ci);
+void ci_hdrc_host_driver_init(void);
#else
@@ -18,6 +19,11 @@
}
+static void ci_hdrc_host_driver_init(void)
+{
+
+}
+
#endif
#endif /* __DRIVERS_USB_CHIPIDEA_HOST_H */
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index f7f35a3..6df9715 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -699,6 +699,10 @@
int ret;
ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+ if (ret >= HIDG_MINORS) {
+ ida_simple_remove(&hidg_ida, ret);
+ ret = -ENODEV;
+ }
return ret;
}
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 44173df..357f63f 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1248,7 +1248,15 @@
static inline int gprinter_get_minor(void)
{
- return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+ int ret;
+
+ ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+ if (ret >= PRINTER_MINORS) {
+ ida_simple_remove(&printer_ida, ret);
+ ret = -ENODEV;
+ }
+
+ return ret;
}
static inline void gprinter_put_minor(int minor)
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 6d3eb8b..5318615 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1162,14 +1162,14 @@
factor = 1000;
} else {
ep_desc = &hs_epin_desc;
- factor = 125;
+ factor = 8000;
}
/* pre-compute some values for iso_complete() */
uac2->p_framesize = opts->p_ssize *
num_channels(opts->p_chmask);
rate = opts->p_srate * uac2->p_framesize;
- uac2->p_interval = (1 << (ep_desc->bInterval - 1)) * factor;
+ uac2->p_interval = factor / (1 << (ep_desc->bInterval - 1));
uac2->p_pktsize = min_t(unsigned int, rate / uac2->p_interval,
prm->max_psize);
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index b04980c..1efa612 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -779,7 +779,7 @@
/* The current hw dequeue pointer */
tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(0));
deq_ptr_64 = tmp_32;
- tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(1));
+ tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS1(0));
deq_ptr_64 |= ((u64)tmp_32 << 32);
/* we have the dma addr of next bd that will be fetched by hardware */
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 362ee8a..89ed5e7 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -323,6 +323,7 @@
err3:
put_device(&udc->dev);
+ device_del(&gadget->dev);
err2:
put_device(&gadget->dev);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 3e442f7..9a8c936 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1792,7 +1792,8 @@
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ if (timer_pending(&xhci->cmd_timer))
+ del_timer_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6a8fc52..32f4d56 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -82,7 +82,7 @@
return 0;
/* offset in TRBs */
segment_offset = trb - seg->trbs;
- if (segment_offset > TRBS_PER_SEGMENT)
+ if (segment_offset >= TRBS_PER_SEGMENT)
return 0;
return seg->dma + (segment_offset * sizeof(*trb));
}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 19b85ee..876423b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1099,6 +1099,8 @@
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
.driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
+ { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x9041, 0xff),
+ .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC7305/MC7355 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 9c63897..d156545 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -145,7 +145,6 @@
{DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */
{DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */
{DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */
- {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */
{DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */
{DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */
@@ -158,6 +157,7 @@
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
/* Huawei devices */
{DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 46179a0..07d1ecd 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist