[SCSI] mpt2sas: using the same naming convention for all static function
This fix's is for all local function so their name has the "_" preceeding
the module name, then function name. Most the code is already is using this
naming convention.
Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e03dc0b..e4d8586 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@
};
/**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
* @ioc: per adapter object
* @sas_address: expander sas address
* @edev: the sas_expander_device object
@@ -274,7 +274,7 @@
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
u64 sas_address, struct sas_expander_device *edev)
{
Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@
MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
mpt2sas_port->remote_identify.device_type ==
MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
- transport_expander_report_manufacture(ioc,
+ _transport_expander_report_manufacture(ioc,
mpt2sas_port->remote_identify.sas_address,
rphy_to_expander_device(rphy));
@@ -852,7 +852,7 @@
}
/**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
* @phy: The sas phy object
*
* Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@
*
*/
static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@
}
/**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
* @phy: The sas phy object
*
* Obtain the enclosure logical id for an expander.
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@
}
/**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
* @phy: The sas phy object
*
* Returns the slot id for a device that resides inside an enclosure.
*/
static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_device *sas_device;
@@ -953,7 +953,7 @@
}
/**
- * transport_phy_reset -
+ * _transport_phy_reset -
* @phy: The sas phy object
* @hard_reset:
*
@@ -961,7 +961,7 @@
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@
}
/**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
* @rphy: sas transport rphy object
* @req:
@@ -1012,7 +1012,7 @@
* smp_rep_general /sys/class/bsg/expander-5:0
*/
static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
struct request *req)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1201,11 +1201,11 @@
}
struct sas_function_template mpt2sas_transport_functions = {
- .get_linkerrors = transport_get_linkerrors,
- .get_enclosure_identifier = transport_get_enclosure_identifier,
- .get_bay_identifier = transport_get_bay_identifier,
- .phy_reset = transport_phy_reset,
- .smp_handler = transport_smp_handler,
+ .get_linkerrors = _transport_get_linkerrors,
+ .get_enclosure_identifier = _transport_get_enclosure_identifier,
+ .get_bay_identifier = _transport_get_bay_identifier,
+ .phy_reset = _transport_phy_reset,
+ .smp_handler = _transport_smp_handler,
};
struct scsi_transport_template *mpt2sas_transport_template;