clk: sunxi-ng: sun6i-a31: set CLK_SET_RATE_UNGATE for all PLLs
The PLLs have a "lock" bit in their configuration registers which
indicate if the PLL has locked on to the requested clock rate. We
check this bit in the .set_rate op. The PLL cannot lock on if it's
not running, which might be a false positive (warning).
Set the CLK_SET_RATE_UNGATE flag for all PLLs so whenever clk_set_rate
is called on them, they get enabled and the "lock" check is really
checking the PLL.
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index bb488e8..ff0d621 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -59,7 +59,7 @@
0, 5, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
"osc24M", 0x010,
@@ -71,7 +71,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x018,
@@ -83,7 +83,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
"osc24M", 0x020,
@@ -92,7 +92,7 @@
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph_clk, "pll-periph",
"osc24M", 0x028,
@@ -101,7 +101,7 @@
BIT(31), /* gate */
BIT(28), /* lock */
2, /* post-div */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
"osc24M", 0x030,
@@ -113,7 +113,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
"osc24M", 0x038,
@@ -125,7 +125,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
/*
* The MIPI PLL has 2 modes: "MIPI" and "HDMI".
@@ -145,7 +145,7 @@
21, 0, /* mux */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll9_clk, "pll9",
"osc24M", 0x044,
@@ -157,7 +157,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll10_clk, "pll10",
"osc24M", 0x048,
@@ -169,7 +169,7 @@
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
- 0);
+ CLK_SET_RATE_UNGATE);
static const char * const cpux_parents[] = { "osc32k", "osc24M",
"pll-cpu", "pll-cpu" };