ssb: Add support for block-I/O
This adds support for block based I/O to SSB.
This is needed in order to efficiently support PIO data
transfers to the card.
The block-I/O support is only compiled, if it's selected by the
weird driver that needs it. So there's no overhead for sane devices.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index f1514b3..904b1a8d 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -613,6 +613,41 @@
return ioread32(bus->mmio + offset);
}
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_pci_block_read(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ struct ssb_bus *bus = dev->bus;
+ void __iomem *addr = bus->mmio + offset;
+
+ if (unlikely(ssb_pci_assert_buspower(bus)))
+ goto error;
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ goto error;
+ }
+ switch (reg_width) {
+ case sizeof(u8):
+ ioread8_rep(addr, buffer, count);
+ break;
+ case sizeof(u16):
+ SSB_WARN_ON(count & 1);
+ ioread16_rep(addr, buffer, count >> 1);
+ break;
+ case sizeof(u32):
+ SSB_WARN_ON(count & 3);
+ ioread32_rep(addr, buffer, count >> 2);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+
+ return;
+error:
+ memset(buffer, 0xFF, count);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value)
{
struct ssb_bus *bus = dev->bus;
@@ -652,6 +687,37 @@
iowrite32(value, bus->mmio + offset);
}
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_pci_block_write(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ struct ssb_bus *bus = dev->bus;
+ void __iomem *addr = bus->mmio + offset;
+
+ if (unlikely(ssb_pci_assert_buspower(bus)))
+ return;
+ if (unlikely(bus->mapped_device != dev)) {
+ if (unlikely(ssb_pci_switch_core(bus, dev)))
+ return;
+ }
+ switch (reg_width) {
+ case sizeof(u8):
+ iowrite8_rep(addr, buffer, count);
+ break;
+ case sizeof(u16):
+ SSB_WARN_ON(count & 1);
+ iowrite16_rep(addr, buffer, count >> 1);
+ break;
+ case sizeof(u32):
+ SSB_WARN_ON(count & 3);
+ iowrite32_rep(addr, buffer, count >> 2);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
/* Not "static", as it's used in main.c */
const struct ssb_bus_ops ssb_pci_ops = {
.read8 = ssb_pci_read8,
@@ -660,6 +726,10 @@
.write8 = ssb_pci_write8,
.write16 = ssb_pci_write16,
.write32 = ssb_pci_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+ .block_read = ssb_pci_block_read,
+ .block_write = ssb_pci_block_write,
+#endif
};
static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,