Updated pcmcia driver with pb1200 and db1200 support.
Updated db1200_defconfig so pcmcia is enabled by default.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index a5e3ea4..0f29815 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -207,8 +207,6 @@
.resource = au1200_ide0_resources,
};
-#endif
-
static struct platform_device au1x00_pcmcia_device = {
.name = "au1x00-pcmcia",
.id = 0,
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index a41fbb3..77ecee7 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -42,9 +42,11 @@
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
+au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
+au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 42cf8bf..24cfee1 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -40,7 +40,15 @@
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/db1x00.h>
+
+#if defined(CONFIG_MIPS_DB1200)
+ #include <db1200.h>
+#elif defined(CONFIG_MIPS_PB1200)
+ #include <pb1200.h>
+#else
+ #include <asm/mach-db1x00/db1x00.h>
+ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+#endif
#include "au1000_generic.h"
@@ -50,7 +58,6 @@
#define debug(x,args...)
#endif
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
@@ -59,6 +66,8 @@
{
#ifdef CONFIG_MIPS_DB1550
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
+#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
#else
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
#endif
@@ -85,11 +94,19 @@
switch (skt->nr) {
case 0:
vs = bcsr->status & 0x3;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(0);
+#else
inserted = !(bcsr->status & (1<<4));
+#endif
break;
case 1:
vs = (bcsr->status & 0xC)>>2;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(1);
+#else
inserted = !(bcsr->status & (1<<5));
+#endif
break;
default:/* should never happen */
return;
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index d5122b1e..b0e7908 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -44,13 +44,13 @@
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_PB1200)
#define AU1X_SOCK1_IO 0xF08000000
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
#define AU1X_SOCK1_PHYS_MEM 0xF88000000
#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || defined(CONFIG_MIPS_DB1200)
#define AU1X_SOCK1_IO 0xF04000000
#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
#define AU1X_SOCK1_PHYS_MEM 0xF84000000
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index 6d1ddf4..5d89437 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -206,6 +206,16 @@
#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
/* For drivers/pcmcia/au1000_db1x00.c */
+
+/* PCMCIA Db1x00 specific defines */
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
#define BOARD_PC0_INT DB1200_PC0_INT
#define BOARD_PC1_INT DB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index 0f66463..9a3088b1 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -173,6 +173,14 @@
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
+/* PCMCIA Db1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300)
#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT