b43: HT-PHY: rename defines addressing cores on the 2059 radio
After comparing writes to registers at 0x000, 0x400 and 0x800 it seems
there are many very similar writes. So 0x000 offset is not for accessing
something totally different, but probably just the first out of three
cores.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 83239fd..d40e799 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -63,7 +63,7 @@
b43_radio_write(dev, 0x98, e->radio_syn98);
for (i = 0; i < 2; i++) {
- routing = i ? R2059_RXRX1 : R2059_TXRX0;
+ routing = i ? R2059_C3 : R2059_C2;
b43_radio_write(dev, routing | 0x4a, e->radio_rxtx4a);
b43_radio_write(dev, routing | 0x58, e->radio_rxtx58);
b43_radio_write(dev, routing | 0x5a, e->radio_rxtx5a);
@@ -87,7 +87,7 @@
static void b43_radio_2059_init(struct b43_wldev *dev)
{
- const u16 routing[] = { R2059_SYN, R2059_TXRX0, R2059_RXRX1 };
+ const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3 };
const u16 radio_values[3][2] = {
{ 0x61, 0xE9 }, { 0x69, 0xD5 }, { 0x73, 0x99 },
};
@@ -106,17 +106,17 @@
b43_radio_mask(dev, 0xc0, ~0x0080);
if (1) { /* FIXME */
- b43_radio_set(dev, R2059_RXRX1 | 0x4, 0x1);
+ b43_radio_set(dev, R2059_C3 | 0x4, 0x1);
udelay(10);
- b43_radio_set(dev, R2059_RXRX1 | 0x0BF, 0x1);
- b43_radio_maskset(dev, R2059_RXRX1 | 0x19B, 0x3, 0x2);
+ b43_radio_set(dev, R2059_C3 | 0x0BF, 0x1);
+ b43_radio_maskset(dev, R2059_C3 | 0x19B, 0x3, 0x2);
- b43_radio_set(dev, R2059_RXRX1 | 0x4, 0x2);
+ b43_radio_set(dev, R2059_C3 | 0x4, 0x2);
udelay(100);
- b43_radio_mask(dev, R2059_RXRX1 | 0x4, ~0x2);
+ b43_radio_mask(dev, R2059_C3 | 0x4, ~0x2);
for (i = 0; i < 10000; i++) {
- if (b43_radio_read(dev, R2059_RXRX1 | 0x145) & 1) {
+ if (b43_radio_read(dev, R2059_C3 | 0x145) & 1) {
i = 0;
break;
}
@@ -125,7 +125,7 @@
if (i)
b43err(dev->wl, "radio 0x945 timeout\n");
- b43_radio_mask(dev, R2059_RXRX1 | 0x4, ~0x1);
+ b43_radio_mask(dev, R2059_C3 | 0x4, ~0x1);
b43_radio_set(dev, 0xa, 0x60);
for (i = 0; i < 3; i++) {
@@ -397,7 +397,7 @@
{ B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, },
{ B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, },
};
- static const u16 radio_r[] = { R2059_SYN, R2059_TXRX0, R2059_RXRX1, };
+ static const u16 radio_r[] = { R2059_C1, R2059_C2, R2059_C3, };
int core;
if (core_sel == 0) {
@@ -417,7 +417,7 @@
b43_phy_set(dev, ctl_regs[core][1], 0x1 << 9);
b43_phy_set(dev, ctl_regs[core][1], 0x1 << 10);
- b43_radio_set(dev, R2059_RXRX1 | 0xbf, 0x1);
+ b43_radio_set(dev, R2059_C3 | 0xbf, 0x1);
b43_radio_write(dev, radio_r[core] | 0x159,
0x11);
break;
diff --git a/drivers/net/wireless/b43/radio_2059.h b/drivers/net/wireless/b43/radio_2059.h
index e4d69e5..a6a61fb 100644
--- a/drivers/net/wireless/b43/radio_2059.h
+++ b/drivers/net/wireless/b43/radio_2059.h
@@ -5,9 +5,9 @@
#include "phy_ht.h"
-#define R2059_SYN 0x000
-#define R2059_TXRX0 0x400
-#define R2059_RXRX1 0x800
+#define R2059_C1 0x000
+#define R2059_C2 0x400
+#define R2059_C3 0x800
#define R2059_ALL 0xC00
/* Values for various registers uploaded on channel switching */