[PATCH] ext3: cleanups and WARN_ON()
- Clean up a few little layout things and comments.
- Add a WARN_ON to a case which I was wondering about.
- Tune up some inlines.
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 0cd1261..e68587a 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -44,16 +44,16 @@
/*
* Test whether an inode is a fast symlink.
*/
-static inline int ext3_inode_is_fast_symlink(struct inode *inode)
+static int ext3_inode_is_fast_symlink(struct inode *inode)
{
int ea_blocks = EXT3_I(inode)->i_file_acl ?
(inode->i_sb->s_blocksize >> 9) : 0;
- return (S_ISLNK(inode->i_mode) &&
- inode->i_blocks - ea_blocks == 0);
+ return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0);
}
-/* The ext3 forget function must perform a revoke if we are freeing data
+/*
+ * The ext3 forget function must perform a revoke if we are freeing data
* which has been journaled. Metadata (eg. indirect blocks) must be
* revoked in all cases.
*
@@ -61,10 +61,8 @@
* but there may still be a record of it in the journal, and that record
* still needs to be revoked.
*/
-
-int ext3_forget(handle_t *handle, int is_metadata,
- struct inode *inode, struct buffer_head *bh,
- int blocknr)
+int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode,
+ struct buffer_head *bh, int blocknr)
{
int err;
@@ -104,10 +102,9 @@
}
/*
- * Work out how many blocks we need to progress with the next chunk of a
+ * Work out how many blocks we need to proceed with the next chunk of a
* truncate transaction.
*/
-
static unsigned long blocks_for_truncate(struct inode *inode)
{
unsigned long needed;
@@ -141,7 +138,6 @@
* extend fails, we need to propagate the failure up and restart the
* transaction in the top-level truncate loop. --sct
*/
-
static handle_t *start_transaction(struct inode *inode)
{
handle_t *result;
@@ -194,9 +190,11 @@
handle = start_transaction(inode);
if (IS_ERR(handle)) {
- /* If we're going to skip the normal cleanup, we still
- * need to make sure that the in-core orphan linked list
- * is properly cleaned up. */
+ /*
+ * If we're going to skip the normal cleanup, we still need to
+ * make sure that the in-core orphan linked list is properly
+ * cleaned up.
+ */
ext3_orphan_del(NULL, inode);
goto no_delete;
}
@@ -247,7 +245,7 @@
p->bh = bh;
}
-static inline int verify_chain(Indirect *from, Indirect *to)
+static int verify_chain(Indirect *from, Indirect *to)
{
while (from <= to && from->key == *from->p)
from++;
@@ -317,7 +315,7 @@
offsets[n++] = i_block & (ptrs - 1);
final = ptrs;
} else {
- ext3_warning (inode->i_sb, "ext3_block_to_path", "block > big");
+ ext3_warning(inode->i_sb, "ext3_block_to_path", "block > big");
}
if (boundary)
*boundary = final - 1 - (i_block & (ptrs - 1));
@@ -409,7 +407,6 @@
*
* Caller must make sure that @ind is valid and will stay that way.
*/
-
static unsigned long ext3_find_near(struct inode *inode, Indirect *ind)
{
struct ext3_inode_info *ei = EXT3_I(inode);
@@ -419,17 +416,18 @@
unsigned long colour;
/* Try to find previous block */
- for (p = ind->p - 1; p >= start; p--)
+ for (p = ind->p - 1; p >= start; p--) {
if (*p)
return le32_to_cpu(*p);
+ }
/* No such thing, so let's try location of indirect block */
if (ind->bh)
return ind->bh->b_blocknr;
/*
- * It is going to be refered from inode itself? OK, just put it into
- * the same cylinder group then.
+ * It is going to be referred to from the inode itself? OK, just put it
+ * into the same cylinder group then.
*/
bg_start = (ei->i_block_group * EXT3_BLOCKS_PER_GROUP(inode->i_sb)) +
le32_to_cpu(EXT3_SB(inode->i_sb)->s_es->s_first_data_block);
@@ -453,7 +451,9 @@
static unsigned long ext3_find_goal(struct inode *inode, long block,
Indirect chain[4], Indirect *partial)
{
- struct ext3_block_alloc_info *block_i = EXT3_I(inode)->i_block_alloc_info;
+ struct ext3_block_alloc_info *block_i;
+
+ block_i = EXT3_I(inode)->i_block_alloc_info;
/*
* try the heuristic for sequential allocation,
@@ -466,6 +466,7 @@
return ext3_find_near(inode, partial);
}
+
/**
* ext3_blks_to_allocate: Look up the block map and count the number
* of direct blocks need to be allocated for the given branch.
@@ -478,8 +479,7 @@
* return the total number of blocks to be allocate, including the
* direct and indirect blocks.
*/
-static int
-ext3_blks_to_allocate(Indirect * branch, int k, unsigned long blks,
+static int ext3_blks_to_allocate(Indirect *branch, int k, unsigned long blks,
int blocks_to_boundary)
{
unsigned long count = 0;
@@ -489,7 +489,7 @@
* then it's clear blocks on that path have not allocated
*/
if (k > 0) {
- /* right now don't hanel cross boundary allocation */
+ /* right now we don't handle cross boundary allocation */
if (blks < blocks_to_boundary + 1)
count += blks;
else
@@ -538,7 +538,7 @@
while (1) {
count = target;
/* allocating blocks for indirect blocks and direct blocks */
- current_block = ext3_new_blocks(handle, inode, goal, &count, err);
+ current_block = ext3_new_blocks(handle,inode,goal,&count,err);
if (*err)
goto failed_out;
@@ -591,7 +591,6 @@
* ext3_alloc_block() (normally -ENOSPC). Otherwise we set the chain
* as described above and return 0.
*/
-
static int ext3_alloc_branch(handle_t *handle, struct inode *inode,
int indirect_blks, int *blks, unsigned long goal,
int *offsets, Indirect *branch)
@@ -670,27 +669,28 @@
}
/**
- * ext3_splice_branch - splice the allocated branch onto inode.
- * @inode: owner
- * @block: (logical) number of block we are adding
- * @chain: chain of indirect blocks (with a missing link - see
- * ext3_alloc_branch)
- * @where: location of missing link
- * @num: number of indirect blocks we are adding
- * @blks: number of direct blocks we are adding
+ * ext3_splice_branch - splice the allocated branch onto inode.
+ * @inode: owner
+ * @block: (logical) number of block we are adding
+ * @chain: chain of indirect blocks (with a missing link - see
+ * ext3_alloc_branch)
+ * @where: location of missing link
+ * @num: number of indirect blocks we are adding
+ * @blks: number of direct blocks we are adding
*
- * This function fills the missing link and does all housekeeping needed in
- * inode (->i_blocks, etc.). In case of success we end up with the full
- * chain to new block and return 0.
+ * This function fills the missing link and does all housekeeping needed in
+ * inode (->i_blocks, etc.). In case of success we end up with the full
+ * chain to new block and return 0.
*/
-
-static int ext3_splice_branch(handle_t *handle, struct inode *inode, long block,
- Indirect *where, int num, int blks)
+static int ext3_splice_branch(handle_t *handle, struct inode *inode,
+ long block, Indirect *where, int num, int blks)
{
int i;
int err = 0;
- struct ext3_block_alloc_info *block_i = EXT3_I(inode)->i_block_alloc_info;
+ struct ext3_block_alloc_info *block_i;
unsigned long current_block;
+
+ block_i = EXT3_I(inode)->i_block_alloc_info;
/*
* If we're splicing into a [td]indirect block (as opposed to the
* inode) then we need to get write access to the [td]indirect block
@@ -705,8 +705,11 @@
/* That's it */
*where->p = where->key;
- /* update host bufferhead or inode to point to
- * more just allocated direct blocks blocks */
+
+ /*
+ * Update the host buffer_head or inode to point to more just allocated
+ * direct blocks blocks
+ */
if (num == 0 && blks > 1) {
current_block = le32_to_cpu(where->key + 1);
for (i = 1; i < blks; i++)
@@ -720,7 +723,8 @@
*/
if (block_i) {
block_i->last_alloc_logical_block = block + blks - 1;
- block_i->last_alloc_physical_block = le32_to_cpu(where[num].key + blks - 1);
+ block_i->last_alloc_physical_block =
+ le32_to_cpu(where[num].key + blks - 1);
}
/* We are done with atomic stuff, now do the rest of housekeeping */
@@ -731,7 +735,7 @@
/* had we spliced it onto indirect block? */
if (where->bh) {
/*
- * akpm: If we spliced it onto an indirect block, we haven't
+ * If we spliced it onto an indirect block, we haven't
* altered the inode. Note however that if it is being spliced
* onto an indirect block at the very end of the file (the
* file is growing) then we *will* alter the inode to reflect
@@ -756,7 +760,7 @@
for (i = 1; i <= num; i++) {
BUFFER_TRACE(where[i].bh, "call journal_forget");
ext3_journal_forget(handle, where[i].bh);
- ext3_free_blocks(handle, inode, le32_to_cpu(where[i-1].key), 1);
+ ext3_free_blocks(handle,inode,le32_to_cpu(where[i-1].key),1);
}
ext3_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks);
@@ -775,17 +779,16 @@
* allocations is needed - we simply release blocks and do not touch anything
* reachable from inode.
*
- * akpm: `handle' can be NULL if create == 0.
+ * `handle' can be NULL if create == 0.
*
* The BKL may not be held on entry here. Be sure to take it early.
* return > 0, # of blocks mapped or allocated.
* return = 0, if plain lookup failed.
* return < 0, error case.
*/
-
-int
-ext3_get_blocks_handle(handle_t *handle, struct inode *inode, sector_t iblock,
- unsigned long maxblocks, struct buffer_head *bh_result,
+int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
+ sector_t iblock, unsigned long maxblocks,
+ struct buffer_head *bh_result,
int create, int extend_disksize)
{
int err = -EIO;
@@ -802,7 +805,7 @@
J_ASSERT(handle != NULL || create == 0);
- depth = ext3_block_to_path(inode, iblock, offsets, &blocks_to_boundary);
+ depth = ext3_block_to_path(inode,iblock,offsets,&blocks_to_boundary);
if (depth == 0)
goto out;
@@ -998,8 +1001,8 @@
/*
* `handle' can be NULL if create is zero
*/
-struct buffer_head *ext3_getblk(handle_t *handle, struct inode * inode,
- long block, int create, int * errp)
+struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
+ long block, int create, int *errp)
{
struct buffer_head dummy;
int fatal = 0, err;
@@ -1029,17 +1032,18 @@
J_ASSERT(create != 0);
J_ASSERT(handle != 0);
- /* Now that we do not always journal data, we
- should keep in mind whether this should
- always journal the new buffer as metadata.
- For now, regular file writes use
- ext3_get_block instead, so it's not a
- problem. */
+ /*
+ * Now that we do not always journal data, we should
+ * keep in mind whether this should always journal the
+ * new buffer as metadata. For now, regular file
+ * writes use ext3_get_block instead, so it's not a
+ * problem.
+ */
lock_buffer(bh);
BUFFER_TRACE(bh, "call get_create_access");
fatal = ext3_journal_get_create_access(handle, bh);
if (!fatal && !buffer_uptodate(bh)) {
- memset(bh->b_data, 0, inode->i_sb->s_blocksize);
+ memset(bh->b_data,0,inode->i_sb->s_blocksize);
set_buffer_uptodate(bh);
}
unlock_buffer(bh);
@@ -1061,7 +1065,7 @@
return NULL;
}
-struct buffer_head *ext3_bread(handle_t *handle, struct inode * inode,
+struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode,
int block, int create, int *err)
{
struct buffer_head * bh;
@@ -1137,9 +1141,8 @@
* is elevated. We'll still have enough credits for the tiny quotafile
* write.
*/
-
-static int do_journal_get_write_access(handle_t *handle,
- struct buffer_head *bh)
+static int do_journal_get_write_access(handle_t *handle,
+ struct buffer_head *bh)
{
if (!buffer_mapped(bh) || buffer_freed(bh))
return 0;
@@ -1180,8 +1183,7 @@
return ret;
}
-int
-ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh)
+int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh)
{
int err = journal_dirty_data(handle, bh);
if (err)
@@ -1206,7 +1208,6 @@
* ext3 never places buffers on inode->i_mapping->private_list. metadata
* buffers are managed internally.
*/
-
static int ext3_ordered_commit_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
@@ -1416,7 +1417,7 @@
* we don't need to open a transaction here.
*/
static int ext3_ordered_writepage(struct page *page,
- struct writeback_control *wbc)
+ struct writeback_control *wbc)
{
struct inode *inode = page->mapping->host;
struct buffer_head *page_bufs;
@@ -1907,11 +1908,8 @@
* c) free the subtrees growing from the inode past the @chain[0].
* (no partially truncated stuff there). */
-static Indirect *ext3_find_shared(struct inode *inode,
- int depth,
- int offsets[4],
- Indirect chain[4],
- __le32 *top)
+static Indirect *ext3_find_shared(struct inode *inode, int depth,
+ int offsets[4], Indirect chain[4], __le32 *top)
{
Indirect *partial, *p;
int k, err;
@@ -1950,8 +1948,7 @@
}
/* Writer: end */
- while(partial > p)
- {
+ while(partial > p) {
brelse(partial->bh);
partial--;
}
@@ -1967,10 +1964,9 @@
* We release `count' blocks on disk, but (last - first) may be greater
* than `count' because there can be holes in there.
*/
-static void
-ext3_clear_blocks(handle_t *handle, struct inode *inode, struct buffer_head *bh,
- unsigned long block_to_free, unsigned long count,
- __le32 *first, __le32 *last)
+static void ext3_clear_blocks(handle_t *handle, struct inode *inode,
+ struct buffer_head *bh, unsigned long block_to_free,
+ unsigned long count, __le32 *first, __le32 *last)
{
__le32 *p;
if (try_to_extend_transaction(handle, inode)) {
@@ -2231,8 +2227,7 @@
* that's fine - as long as they are linked from the inode, the post-crash
* ext3_truncate() run will find them and release them.
*/
-
-void ext3_truncate(struct inode * inode)
+void ext3_truncate(struct inode *inode)
{
handle_t *handle;
struct ext3_inode_info *ei = EXT3_I(inode);
@@ -2356,29 +2351,26 @@
do_indirects:
/* Kill the remaining (whole) subtrees */
switch (offsets[0]) {
- default:
- nr = i_data[EXT3_IND_BLOCK];
- if (nr) {
- ext3_free_branches(handle, inode, NULL,
- &nr, &nr+1, 1);
- i_data[EXT3_IND_BLOCK] = 0;
- }
- case EXT3_IND_BLOCK:
- nr = i_data[EXT3_DIND_BLOCK];
- if (nr) {
- ext3_free_branches(handle, inode, NULL,
- &nr, &nr+1, 2);
- i_data[EXT3_DIND_BLOCK] = 0;
- }
- case EXT3_DIND_BLOCK:
- nr = i_data[EXT3_TIND_BLOCK];
- if (nr) {
- ext3_free_branches(handle, inode, NULL,
- &nr, &nr+1, 3);
- i_data[EXT3_TIND_BLOCK] = 0;
- }
- case EXT3_TIND_BLOCK:
- ;
+ default:
+ nr = i_data[EXT3_IND_BLOCK];
+ if (nr) {
+ ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
+ i_data[EXT3_IND_BLOCK] = 0;
+ }
+ case EXT3_IND_BLOCK:
+ nr = i_data[EXT3_DIND_BLOCK];
+ if (nr) {
+ ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
+ i_data[EXT3_DIND_BLOCK] = 0;
+ }
+ case EXT3_DIND_BLOCK:
+ nr = i_data[EXT3_TIND_BLOCK];
+ if (nr) {
+ ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
+ i_data[EXT3_TIND_BLOCK] = 0;
+ }
+ case EXT3_TIND_BLOCK:
+ ;
}
ext3_discard_reservation(inode);
@@ -2387,8 +2379,10 @@
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, inode);
- /* In a multi-transaction truncate, we only make the final
- * transaction synchronous */
+ /*
+ * In a multi-transaction truncate, we only make the final transaction
+ * synchronous
+ */
if (IS_SYNC(inode))
handle->h_sync = 1;
out_stop:
@@ -2414,20 +2408,16 @@
struct ext3_group_desc * gdp;
- if ((ino != EXT3_ROOT_INO &&
- ino != EXT3_JOURNAL_INO &&
- ino != EXT3_RESIZE_INO &&
- ino < EXT3_FIRST_INO(sb)) ||
- ino > le32_to_cpu(
- EXT3_SB(sb)->s_es->s_inodes_count)) {
- ext3_error (sb, "ext3_get_inode_block",
+ if ((ino != EXT3_ROOT_INO && ino != EXT3_JOURNAL_INO &&
+ ino != EXT3_RESIZE_INO && ino < EXT3_FIRST_INO(sb)) ||
+ ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)) {
+ ext3_error(sb, "ext3_get_inode_block",
"bad inode number: %lu", ino);
return 0;
}
block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb);
if (block_group >= EXT3_SB(sb)->s_groups_count) {
- ext3_error (sb, "ext3_get_inode_block",
- "group >= groups count");
+ ext3_error(sb,"ext3_get_inode_block","group >= groups count");
return 0;
}
smp_rmb();
@@ -2440,7 +2430,7 @@
return 0;
}
- gdp = (struct ext3_group_desc *) bh->b_data;
+ gdp = (struct ext3_group_desc *)bh->b_data;
/*
* Figure out the offset within the block group inode table
*/
@@ -2989,7 +2979,7 @@
/*
- * akpm: how many blocks doth make a writepage()?
+ * How many blocks doth make a writepage()?
*
* With N blocks per page, it may be:
* N data blocks
@@ -3079,8 +3069,8 @@
}
/*
- * akpm: What we do here is to mark the in-core inode as clean
- * with respect to inode dirtiness (it may still be data-dirty).
+ * What we do here is to mark the in-core inode as clean with respect to inode
+ * dirtiness (it may still be data-dirty).
* This means that the in-core inode may be reaped by prune_icache
* without having to perform any I/O. This is a very good thing,
* because *any* task may call prune_icache - even ones which
@@ -3112,7 +3102,7 @@
}
/*
- * akpm: ext3_dirty_inode() is called from __mark_inode_dirty()
+ * ext3_dirty_inode() is called from __mark_inode_dirty()
*
* We're really interested in the case where a file is being extended.
* i_size has been changed by generic_commit_write() and we thus need
@@ -3148,7 +3138,7 @@
return;
}
-#ifdef AKPM
+#if 0
/*
* Bind an inode's backing buffer_head into this transaction, to prevent
* it from being flushed to disk early. Unlike
@@ -3156,8 +3146,7 @@
* returns no iloc structure, so the caller needs to repeat the iloc
* lookup to mark the inode dirty later.
*/
-static inline int
-ext3_pin_inode(handle_t *handle, struct inode *inode)
+static int ext3_pin_inode(handle_t *handle, struct inode *inode)
{
struct ext3_iloc iloc;