i2c: omap: make reset a seperate function
Implement reset as a separate function.
This will enable us to make sure that we don't do the
calculation again on every transfer.
Also at probe the reset is not added as the hwmod is doing that
for us.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0195d99..faaa052 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -302,15 +302,9 @@
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
}
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
{
- u16 psc = 0, scll = 0, sclh = 0;
- u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
- unsigned long fclk_rate = 12000000;
unsigned long timeout;
- unsigned long internal_clk = 0;
- struct clk *fclk;
-
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -348,14 +342,27 @@
omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
dev->syscstate);
- /*
- * Enabling all wakup sources to stop I2C freezing on
- * WFI instruction.
- * REVISIT: Some wkup sources might not be needed.
- */
- dev->westate = OMAP_I2C_WE_ALL;
}
}
+ return 0;
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+ u16 psc = 0, scll = 0, sclh = 0;
+ u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+ unsigned long fclk_rate = 12000000;
+ unsigned long internal_clk = 0;
+ struct clk *fclk;
+
+ if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
+ /*
+ * Enabling all wakup sources to stop I2C freezing on
+ * WFI instruction.
+ * REVISIT: Some wkup sources might not be needed.
+ */
+ dev->westate = OMAP_I2C_WE_ALL;
+ }
if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
@@ -599,7 +606,8 @@
OMAP_I2C_TIMEOUT);
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
- omap_i2c_init(dev);
+ omap_i2c_reset(dev);
+ __omap_i2c_init(dev);
return -ETIMEDOUT;
}
@@ -609,7 +617,8 @@
/* We have an error */
if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
OMAP_I2C_STAT_XUDF)) {
- omap_i2c_init(dev);
+ omap_i2c_reset(dev);
+ __omap_i2c_init(dev);
return -EIO;
}