dm9000: Move the Davicom driver
Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.
CC: Ben Dooks <ben@simtec.co.uk>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e83f559..23155cc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -246,34 +246,6 @@
To compile this driver as a module, choose M here. The module
will be called netx-eth.
-config DM9000
- tristate "DM9000 support"
- depends on ARM || BLACKFIN || MIPS
- select CRC32
- select MII
- ---help---
- Support for DM9000 chipset.
-
- To compile this driver as a module, choose M here. The module
- will be called dm9000.
-
-config DM9000_DEBUGLEVEL
- int "DM9000 maximum debug level"
- depends on DM9000
- default 4
- help
- The maximum level of debugging code compiled into the DM9000
- driver.
-
-config DM9000_FORCE_SIMPLE_PHY_POLL
- bool "Force simple NSR based PHY polling"
- depends on DM9000
- ---help---
- This configuration forces the DM9000 to use the NSR's LinkStatus
- bit to determine if the link is up or down instead of the more
- costly MII PHY reads. Note, this will not work if the chip is
- operating with an external PHY.
-
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 08ee56f..298587f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -52,7 +52,6 @@
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 0cec25c..45eef59 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -24,6 +24,7 @@
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cirrus/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/davicom/Kconfig"
config DNET
tristate "Dave ethernet support (DNET)"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ebe8aee..dfd5146 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_DM9000) += davicom/
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_NET_VENDOR_DEC) += dec/
obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
new file mode 100644
index 0000000..1809d25
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -0,0 +1,31 @@
+#
+# Davicom device configuration
+#
+
+config DM9000
+ tristate "DM9000 support"
+ depends on ARM || BLACKFIN || MIPS
+ select CRC32
+ select MII
+ ---help---
+ Support for DM9000 chipset.
+
+ To compile this driver as a module, choose M here. The module
+ will be called dm9000.
+
+config DM9000_DEBUGLEVEL
+ int "DM9000 maximum debug level"
+ depends on DM9000
+ default 4
+ ---help---
+ The maximum level of debugging code compiled into the DM9000
+ driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+ bool "Force simple NSR based PHY polling"
+ depends on DM9000
+ ---help---
+ This configuration forces the DM9000 to use the NSR's LinkStatus
+ bit to determine if the link is up or down instead of the more
+ costly MII PHY reads. Note, this will not work if the chip is
+ operating with an external PHY.
diff --git a/drivers/net/ethernet/davicom/Makefile b/drivers/net/ethernet/davicom/Makefile
new file mode 100644
index 0000000..74b31f0
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Davicom device drivers.
+#
+
+obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
similarity index 100%
rename from drivers/net/dm9000.c
rename to drivers/net/ethernet/davicom/dm9000.c
diff --git a/drivers/net/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
similarity index 100%
rename from drivers/net/dm9000.h
rename to drivers/net/ethernet/davicom/dm9000.h