| /* |
| * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "omap36xx.dtsi" |
| |
| / { |
| model = "INCOstartec LILLY-A83X module (DM3730)"; |
| compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; |
| |
| chosen { |
| bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x8000000>; /* 128 MB */ |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led1 { |
| label = "lilly-a83x::led1"; |
| gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| }; |
| |
| sound { |
| compatible = "ti,omap-twl4030"; |
| ti,model = "lilly-a83x"; |
| |
| ti,mcbsp = <&mcbsp2>; |
| }; |
| |
| reg_vcc3: vcc3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| hsusb1_phy: hsusb1_phy { |
| compatible = "usb-nop-xceiv"; |
| vcc-supply = <®_vcc3>; |
| }; |
| }; |
| |
| &omap3_pmx_wkup { |
| pinctrl-names = "default"; |
| |
| lan9221_pins: pinmux_lan9221_pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ |
| >; |
| }; |
| |
| tsc2048_pins: pinmux_tsc2048_pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */ |
| >; |
| }; |
| |
| mmc1cd_pins: pinmux_mmc1cd_pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| pinctrl-names = "default"; |
| |
| uart1_pins: pinmux_uart1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ |
| OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ |
| OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ |
| OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ |
| >; |
| }; |
| |
| uart2_pins: pinmux_uart2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */ |
| OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ |
| >; |
| }; |
| |
| uart3_pins: pinmux_uart3_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ |
| OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ |
| >; |
| }; |
| |
| i2c1_pins: pinmux_i2c1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ |
| OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ |
| >; |
| }; |
| |
| i2c2_pins: pinmux_i2c2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ |
| OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ |
| >; |
| }; |
| |
| i2c3_pins: pinmux_i2c3_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ |
| OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ |
| >; |
| }; |
| |
| hsusb1_pins: pinmux_hsusb1_pins { |
| pinctrl-single,pins = < |
| |
| /* GPIO 182 controls USB-Hub reset. But USB-Phy its |
| * reset can't be controlled. So we clamp this GPIO to |
| * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub. |
| */ |
| |
| OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ |
| >; |
| }; |
| |
| hsusb_otg_pins: pinmux_hsusb_otg_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ |
| OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ |
| OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ |
| OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ |
| OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ |
| OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ |
| OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ |
| OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ |
| OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ |
| OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ |
| OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ |
| OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ |
| >; |
| }; |
| |
| mmc1_pins: pinmux_mmc1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| >; |
| }; |
| |
| spi2_pins: pinmux_spi2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */ |
| OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */ |
| OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */ |
| OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core2 { |
| pinctrl-names = "default"; |
| |
| hsusb1_2_pins: pinmux_hsusb1_2_pins { |
| pinctrl-single,pins = < |
| OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ |
| OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ |
| OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ |
| OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ |
| OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ |
| OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ |
| OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ |
| OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ |
| OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ |
| OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ |
| OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ |
| OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ |
| >; |
| }; |
| |
| gpio1_pins: pinmux_gpio1_pins { |
| pinctrl-single,pins = < |
| OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */ |
| >; |
| }; |
| |
| }; |
| |
| &gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio1_pins>; |
| }; |
| |
| &gpio6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsusb1_pins>; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <2600000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| |
| twl: twl@48 { |
| reg = <0x48>; |
| interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| interrupt-parent = <&intc>; |
| |
| twl_audio: audio { |
| compatible = "ti,twl4030-audio"; |
| codec { |
| }; |
| }; |
| }; |
| }; |
| |
| #include "twl4030.dtsi" |
| #include "twl4030_omap3.dtsi" |
| |
| &twl { |
| vmmc1: regulator-vmmc1 { |
| regulator-always-on; |
| }; |
| |
| vdd1: regulator-vdd1 { |
| regulator-always-on; |
| }; |
| |
| vdd2: regulator-vdd2 { |
| regulator-always-on; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <2600000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <2600000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| gpiom1: gpio@20 { |
| compatible = "mcp,mcp23017"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x20>; |
| }; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins>; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| }; |
| |
| &uart4 { |
| status = "disabled"; |
| }; |
| |
| &mmc1 { |
| cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; |
| cd-inverted; |
| vmmc-supply = <&vmmc1>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins &mmc1cd_pins>; |
| cap-sdio-irq; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| }; |
| |
| &mmc2 { |
| status = "disabled"; |
| }; |
| |
| &mmc3 { |
| status = "disabled"; |
| }; |
| |
| &mcspi2 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pins>; |
| |
| tsc2046@0 { |
| reg = <0>; /* CS0 */ |
| compatible = "ti,tsc2046"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <8 0>; /* boot6 / gpio_8 */ |
| spi-max-frequency = <1000000>; |
| pendown-gpio = <&gpio1 8 0>; |
| vcc-supply = <®_vcc3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&tsc2048_pins>; |
| |
| ti,x-min = <300>; |
| ti,x-max = <3000>; |
| ti,y-min = <600>; |
| ti,y-max = <3600>; |
| ti,x-plate-ohms = <80>; |
| ti,pressure-max = <255>; |
| ti,swap-xy; |
| |
| linux,wakeup; |
| }; |
| }; |
| |
| &usbhsehci { |
| phys = <&hsusb1_phy>; |
| }; |
| |
| &usbhshost { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsusb1_2_pins>; |
| num-ports = <2>; |
| port1-mode = "ehci-phy"; |
| }; |
| |
| &usb_otg_hs { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsusb_otg_pins>; |
| interface-type = <0>; |
| usb-phy = <&usb2_phy>; |
| phys = <&usb2_phy>; |
| phy-names = "usb2-phy"; |
| mode = <3>; |
| power = <50>; |
| }; |
| |
| &mcbsp2 { |
| status = "okay"; |
| }; |
| |
| &gpmc { |
| ranges = <0 0 0x30000000 0x1000000>, |
| <7 0 0x15000000 0x01000000>; |
| |
| nand@0,0 { |
| reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| nand-bus-width = <16>; |
| ti,nand-ecc-opt = "bch8"; |
| /* no elm on omap3 */ |
| |
| gpmc,mux-add-data = <0>; |
| gpmc,device-width = <2>; |
| gpmc,wait-pin = <0>; |
| gpmc,wait-monitoring-ns = <0>; |
| gpmc,burst-length= <4>; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <100>; |
| gpmc,cs-wr-off-ns = <100>; |
| gpmc,adv-on-ns = <0>; |
| gpmc,adv-rd-off-ns = <100>; |
| gpmc,adv-wr-off-ns = <100>; |
| gpmc,oe-on-ns = <5>; |
| gpmc,oe-off-ns = <75>; |
| gpmc,we-on-ns = <5>; |
| gpmc,we-off-ns = <75>; |
| gpmc,rd-cycle-ns = <100>; |
| gpmc,wr-cycle-ns = <100>; |
| gpmc,access-ns = <60>; |
| gpmc,page-burst-access-ns = <5>; |
| gpmc,bus-turnaround-ns = <0>; |
| gpmc,cycle2cycle-samecsen; |
| gpmc,cycle2cycle-delay-ns = <50>; |
| gpmc,wr-data-mux-bus-ns = <75>; |
| gpmc,wr-access-ns = <155>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "MLO"; |
| reg = <0 0x80000>; |
| }; |
| |
| partition@0x80000 { |
| label = "u-boot"; |
| reg = <0x80000 0x1e0000>; |
| }; |
| |
| partition@0x260000 { |
| label = "u-boot-environment"; |
| reg = <0x260000 0x20000>; |
| }; |
| |
| partition@0x280000 { |
| label = "kernel"; |
| reg = <0x280000 0x500000>; |
| }; |
| |
| partition@0x780000 { |
| label = "filesystem"; |
| reg = <0x780000 0xf880000>; |
| }; |
| }; |
| |
| ethernet@7,0 { |
| compatible = "smsc,lan9221", "smsc,lan9115"; |
| bank-width = <2>; |
| gpmc,mux-add-data = <2>; |
| gpmc,cs-on-ns = <10>; |
| gpmc,cs-rd-off-ns = <60>; |
| gpmc,cs-wr-off-ns = <60>; |
| gpmc,adv-on-ns = <0>; |
| gpmc,adv-rd-off-ns = <10>; |
| gpmc,adv-wr-off-ns = <10>; |
| gpmc,oe-on-ns = <10>; |
| gpmc,oe-off-ns = <60>; |
| gpmc,we-on-ns = <10>; |
| gpmc,we-off-ns = <60>; |
| gpmc,rd-cycle-ns = <100>; |
| gpmc,wr-cycle-ns = <100>; |
| gpmc,access-ns = <50>; |
| gpmc,page-burst-access-ns = <5>; |
| gpmc,bus-turnaround-ns = <0>; |
| gpmc,cycle2cycle-delay-ns = <75>; |
| gpmc,wr-data-mux-bus-ns = <15>; |
| gpmc,wr-access-ns = <75>; |
| gpmc,cycle2cycle-samecsen; |
| gpmc,cycle2cycle-diffcsen; |
| vddvario-supply = <®_vcc3>; |
| vdd33a-supply = <®_vcc3>; |
| reg-io-width = <4>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <1 0x2>; |
| reg = <7 0 0xff>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lan9221_pins>; |
| phy-mode = "mii"; |
| }; |
| }; |