drivers/mmc/host/dw_mmc.h - kernel/msm-4.9 - Gitiles

 /*
  * Synopsys DesignWare Multimedia Card Interface driver
  *  (Based on NXP driver for lpc 31xx)
  *
  * Copyright (C) 2009 NXP Semiconductors
  * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #ifndef _DW_MMC_H_
 #define _DW_MMC_H_

 #define DW_MMC_240A		0x240a

 #define SDMMC_CTRL		0x000
 #define SDMMC_PWREN		0x004
 #define SDMMC_CLKDIV		0x008
 #define SDMMC_CLKSRC		0x00c
 #define SDMMC_CLKENA		0x010
 #define SDMMC_TMOUT		0x014
 #define SDMMC_CTYPE		0x018
 #define SDMMC_BLKSIZ		0x01c
 #define SDMMC_BYTCNT		0x020
 #define SDMMC_INTMASK		0x024
 #define SDMMC_CMDARG		0x028
 #define SDMMC_CMD		0x02c
 #define SDMMC_RESP0		0x030
 #define SDMMC_RESP1		0x034
 #define SDMMC_RESP2		0x038
 #define SDMMC_RESP3		0x03c
 #define SDMMC_MINTSTS		0x040
 #define SDMMC_RINTSTS		0x044
 #define SDMMC_STATUS		0x048
 #define SDMMC_FIFOTH		0x04c
 #define SDMMC_CDETECT		0x050
 #define SDMMC_WRTPRT		0x054
 #define SDMMC_GPIO		0x058
 #define SDMMC_TCBCNT		0x05c
 #define SDMMC_TBBCNT		0x060
 #define SDMMC_DEBNCE		0x064
 #define SDMMC_USRID		0x068
 #define SDMMC_VERID		0x06c
 #define SDMMC_HCON		0x070
 #define SDMMC_UHS_REG		0x074
 #define SDMMC_BMOD		0x080
 #define SDMMC_PLDMND		0x084
 #define SDMMC_DBADDR		0x088
 #define SDMMC_IDSTS		0x08c
 #define SDMMC_IDINTEN		0x090
 #define SDMMC_DSCADDR		0x094
 #define SDMMC_BUFADDR		0x098
 #define SDMMC_CDTHRCTL		0x100
 #define SDMMC_DATA(x)		(x)
 /*
 * Registers to support idmac 64-bit address mode
 */
 #define SDMMC_DBADDRL		0x088
 #define SDMMC_DBADDRU		0x08c
 #define SDMMC_IDSTS64		0x090
 #define SDMMC_IDINTEN64		0x094
 #define SDMMC_DSCADDRL		0x098
 #define SDMMC_DSCADDRU		0x09c
 #define SDMMC_BUFADDRL		0x0A0
 #define SDMMC_BUFADDRU		0x0A4

 /*
  * Data offset is difference according to Version
  * Lower than 2.40a : data register offest is 0x100
  */
 #define DATA_OFFSET		0x100
 #define DATA_240A_OFFSET	0x200

 /* shift bit field */
 #define _SBF(f, v)		((v) << (f))

 /* Control register defines */
 #define SDMMC_CTRL_USE_IDMAC		BIT(25)
 #define SDMMC_CTRL_CEATA_INT_EN		BIT(11)
 #define SDMMC_CTRL_SEND_AS_CCSD		BIT(10)
 #define SDMMC_CTRL_SEND_CCSD		BIT(9)
 #define SDMMC_CTRL_ABRT_READ_DATA	BIT(8)
 #define SDMMC_CTRL_SEND_IRQ_RESP	BIT(7)
 #define SDMMC_CTRL_READ_WAIT		BIT(6)
 #define SDMMC_CTRL_DMA_ENABLE		BIT(5)
 #define SDMMC_CTRL_INT_ENABLE		BIT(4)
 #define SDMMC_CTRL_DMA_RESET		BIT(2)
 #define SDMMC_CTRL_FIFO_RESET		BIT(1)
 #define SDMMC_CTRL_RESET		BIT(0)
 /* Clock Enable register defines */
 #define SDMMC_CLKEN_LOW_PWR		BIT(16)
 #define SDMMC_CLKEN_ENABLE		BIT(0)
 /* time-out register defines */
 #define SDMMC_TMOUT_DATA(n)		_SBF(8, (n))
 #define SDMMC_TMOUT_DATA_MSK		0xFFFFFF00
 #define SDMMC_TMOUT_RESP(n)		((n) & 0xFF)
 #define SDMMC_TMOUT_RESP_MSK		0xFF
 /* card-type register defines */
 #define SDMMC_CTYPE_8BIT		BIT(16)
 #define SDMMC_CTYPE_4BIT		BIT(0)
 #define SDMMC_CTYPE_1BIT		0
 /* Interrupt status & mask register defines */
 #define SDMMC_INT_SDIO(n)		BIT(16 + (n))
 #define SDMMC_INT_EBE			BIT(15)
 #define SDMMC_INT_ACD			BIT(14)
 #define SDMMC_INT_SBE			BIT(13)
 #define SDMMC_INT_HLE			BIT(12)
 #define SDMMC_INT_FRUN			BIT(11)
 #define SDMMC_INT_HTO			BIT(10)
 #define SDMMC_INT_VOLT_SWITCH		BIT(10) /* overloads bit 10! */
 #define SDMMC_INT_DRTO			BIT(9)
 #define SDMMC_INT_RTO			BIT(8)
 #define SDMMC_INT_DCRC			BIT(7)
 #define SDMMC_INT_RCRC			BIT(6)
 #define SDMMC_INT_RXDR			BIT(5)
 #define SDMMC_INT_TXDR			BIT(4)
 #define SDMMC_INT_DATA_OVER		BIT(3)
 #define SDMMC_INT_CMD_DONE		BIT(2)
 #define SDMMC_INT_RESP_ERR		BIT(1)
 #define SDMMC_INT_CD			BIT(0)
 #define SDMMC_INT_ERROR			0xbfc2
 /* Command register defines */
 #define SDMMC_CMD_START			BIT(31)
 #define SDMMC_CMD_USE_HOLD_REG	BIT(29)
 #define SDMMC_CMD_VOLT_SWITCH		BIT(28)
 #define SDMMC_CMD_CCS_EXP		BIT(23)
 #define SDMMC_CMD_CEATA_RD		BIT(22)
 #define SDMMC_CMD_UPD_CLK		BIT(21)
 #define SDMMC_CMD_INIT			BIT(15)
 #define SDMMC_CMD_STOP			BIT(14)
 #define SDMMC_CMD_PRV_DAT_WAIT		BIT(13)
 #define SDMMC_CMD_SEND_STOP		BIT(12)
 #define SDMMC_CMD_STRM_MODE		BIT(11)
 #define SDMMC_CMD_DAT_WR		BIT(10)
 #define SDMMC_CMD_DAT_EXP		BIT(9)
 #define SDMMC_CMD_RESP_CRC		BIT(8)
 #define SDMMC_CMD_RESP_LONG		BIT(7)
 #define SDMMC_CMD_RESP_EXP		BIT(6)
 #define SDMMC_CMD_INDX(n)		((n) & 0x1F)
 /* Status register defines */
 #define SDMMC_GET_FCNT(x)		(((x)>>17) & 0x1FFF)
 #define SDMMC_STATUS_DMA_REQ		BIT(31)
 #define SDMMC_STATUS_BUSY		BIT(9)
 /* FIFOTH register defines */
 #define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
 					 ((r) & 0xFFF) << 16 | \
 					 ((t) & 0xFFF))
 /* Internal DMAC interrupt defines */
 #define SDMMC_IDMAC_INT_AI		BIT(9)
 #define SDMMC_IDMAC_INT_NI		BIT(8)
 #define SDMMC_IDMAC_INT_CES		BIT(5)
 #define SDMMC_IDMAC_INT_DU		BIT(4)
 #define SDMMC_IDMAC_INT_FBE		BIT(2)
 #define SDMMC_IDMAC_INT_RI		BIT(1)
 #define SDMMC_IDMAC_INT_TI		BIT(0)
 /* Internal DMAC bus mode bits */
 #define SDMMC_IDMAC_ENABLE		BIT(7)
 #define SDMMC_IDMAC_FB			BIT(1)
 #define SDMMC_IDMAC_SWRESET		BIT(0)
 /* Version ID register define */
 #define SDMMC_GET_VERID(x)		((x) & 0xFFFF)
 /* Card read threshold */
 #define SDMMC_SET_RD_THLD(v, x)		(((v) & 0x1FFF) << 16 | (x))
 #define SDMMC_UHS_18V			BIT(0)
 /* All ctrl reset bits */
 #define SDMMC_CTRL_ALL_RESET_FLAGS \
 	(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)

 /* FIFO register access macros. These should not change the data endian-ness
  * as they are written to memory to be dealt with by the upper layers */
 #define mci_fifo_readw(__reg)	__raw_readw(__reg)
 #define mci_fifo_readl(__reg)	__raw_readl(__reg)
 #define mci_fifo_readq(__reg)	__raw_readq(__reg)

 #define mci_fifo_writew(__value, __reg)	__raw_writew(__reg, __value)
 #define mci_fifo_writel(__value, __reg)	__raw_writel(__reg, __value)
 #define mci_fifo_writeq(__value, __reg)	__raw_writeq(__reg, __value)

 /* Register access macros */
 #define mci_readl(dev, reg)			\
 	readl_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writel(dev, reg, value)			\
 	writel_relaxed((value), (dev)->regs + SDMMC_##reg)

 /* 16-bit FIFO access macros */
 #define mci_readw(dev, reg)			\
 	readw_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writew(dev, reg, value)			\
 	writew_relaxed((value), (dev)->regs + SDMMC_##reg)

 /* 64-bit FIFO access macros */
 #ifdef readq
 #define mci_readq(dev, reg)			\
 	readq_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writeq(dev, reg, value)			\
 	writeq_relaxed((value), (dev)->regs + SDMMC_##reg)
 #else
 /*
  * Dummy readq implementation for architectures that don't define it.
  *
  * We would assume that none of these architectures would configure
  * the IP block with a 64bit FIFO width, so this code will never be
  * executed on those machines. Defining these macros here keeps the
  * rest of the code free from ifdefs.
  */
 #define mci_readq(dev, reg)			\
 	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg))
 #define mci_writeq(dev, reg, value)			\
 	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))

 #define __raw_writeq(__value, __reg) \
 	(*(volatile u64 __force *)(__reg) = (__value))
 #define __raw_readq(__reg) (*(volatile u64 __force *)(__reg))
 #endif

 extern int dw_mci_probe(struct dw_mci *host);
 extern void dw_mci_remove(struct dw_mci *host);
 #ifdef CONFIG_PM_SLEEP
 extern int dw_mci_suspend(struct dw_mci *host);
 extern int dw_mci_resume(struct dw_mci *host);
 #endif

 /**
  * struct dw_mci_slot - MMC slot state
  * @mmc: The mmc_host representing this slot.
  * @host: The MMC controller this slot is using.
  * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
  * @ctype: Card type for this slot.
  * @mrq: mmc_request currently being processed or waiting to be
  *	processed, or NULL when the slot is idle.
  * @queue_node: List node for placing this node in the @queue list of
  *	&struct dw_mci.
  * @clock: Clock rate configured by set_ios(). Protected by host->lock.
  * @__clk_old: The last updated clock with reflecting clock divider.
  *	Keeping track of this helps us to avoid spamming the console
  *	with CONFIG_MMC_CLKGATE.
  * @flags: Random state bits associated with the slot.
  * @id: Number of this slot.
  * @sdio_id: Number of this slot in the SDIO interrupt registers.
  */
 struct dw_mci_slot {
 	struct mmc_host		*mmc;
 	struct dw_mci		*host;

 	int			quirks;

 	u32			ctype;

 	struct mmc_request	*mrq;
 	struct list_head	queue_node;

 	unsigned int		clock;
 	unsigned int		__clk_old;

 	unsigned long		flags;
 #define DW_MMC_CARD_PRESENT	0
 #define DW_MMC_CARD_NEED_INIT	1
 #define DW_MMC_CARD_NO_LOW_PWR	2
 	int			id;
 	int			sdio_id;
 };

 /**
  * dw_mci driver data - dw-mshc implementation specific driver data.
  * @caps: mmc subsystem specified capabilities of the controller(s).
  * @init: early implementation specific initialization.
  * @setup_clock: implementation specific clock configuration.
  * @prepare_command: handle CMD register extensions.
  * @set_ios: handle bus specific extensions.
  * @parse_dt: parse implementation specific device tree properties.
  * @execute_tuning: implementation specific tuning procedure.
  *
  * Provide controller implementation specific extensions. The usage of this
  * data structure is fully optional and usage of each member in this structure
  * is optional as well.
  */
 struct dw_mci_drv_data {
 	unsigned long	*caps;
 	int		(*init)(struct dw_mci *host);
 	int		(*setup_clock)(struct dw_mci *host);
 	void		(*prepare_command)(struct dw_mci *host, u32 *cmdr);
 	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
 	int		(*parse_dt)(struct dw_mci *host);
 	int		(*execute_tuning)(struct dw_mci_slot *slot);
 	int		(*prepare_hs400_tuning)(struct dw_mci *host,
 						struct mmc_ios *ios);
 };
 #endif /* _DW_MMC_H_ */
	/*
	* Synopsys DesignWare Multimedia Card Interface driver
	* (Based on NXP driver for lpc 31xx)
	*
	* Copyright (C) 2009 NXP Semiconductors
	* Copyright (C) 2009, 2010 Imagination Technologies Ltd.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#ifndef _DW_MMC_H_
	#define _DW_MMC_H_

	#define DW_MMC_240A 0x240a

	#define SDMMC_CTRL 0x000
	#define SDMMC_PWREN 0x004
	#define SDMMC_CLKDIV 0x008
	#define SDMMC_CLKSRC 0x00c
	#define SDMMC_CLKENA 0x010
	#define SDMMC_TMOUT 0x014
	#define SDMMC_CTYPE 0x018
	#define SDMMC_BLKSIZ 0x01c
	#define SDMMC_BYTCNT 0x020
	#define SDMMC_INTMASK 0x024
	#define SDMMC_CMDARG 0x028
	#define SDMMC_CMD 0x02c
	#define SDMMC_RESP0 0x030
	#define SDMMC_RESP1 0x034
	#define SDMMC_RESP2 0x038
	#define SDMMC_RESP3 0x03c
	#define SDMMC_MINTSTS 0x040
	#define SDMMC_RINTSTS 0x044
	#define SDMMC_STATUS 0x048
	#define SDMMC_FIFOTH 0x04c
	#define SDMMC_CDETECT 0x050
	#define SDMMC_WRTPRT 0x054
	#define SDMMC_GPIO 0x058
	#define SDMMC_TCBCNT 0x05c
	#define SDMMC_TBBCNT 0x060
	#define SDMMC_DEBNCE 0x064
	#define SDMMC_USRID 0x068
	#define SDMMC_VERID 0x06c
	#define SDMMC_HCON 0x070
	#define SDMMC_UHS_REG 0x074
	#define SDMMC_BMOD 0x080
	#define SDMMC_PLDMND 0x084
	#define SDMMC_DBADDR 0x088
	#define SDMMC_IDSTS 0x08c
	#define SDMMC_IDINTEN 0x090
	#define SDMMC_DSCADDR 0x094
	#define SDMMC_BUFADDR 0x098
	#define SDMMC_CDTHRCTL 0x100
	#define SDMMC_DATA(x) (x)
	/*
	* Registers to support idmac 64-bit address mode
	*/
	#define SDMMC_DBADDRL 0x088
	#define SDMMC_DBADDRU 0x08c
	#define SDMMC_IDSTS64 0x090
	#define SDMMC_IDINTEN64 0x094
	#define SDMMC_DSCADDRL 0x098
	#define SDMMC_DSCADDRU 0x09c
	#define SDMMC_BUFADDRL 0x0A0
	#define SDMMC_BUFADDRU 0x0A4

	/*
	* Data offset is difference according to Version
	* Lower than 2.40a : data register offest is 0x100
	*/
	#define DATA_OFFSET 0x100
	#define DATA_240A_OFFSET 0x200

	/* shift bit field */
	#define _SBF(f, v) ((v) << (f))

	/* Control register defines */
	#define SDMMC_CTRL_USE_IDMAC BIT(25)
	#define SDMMC_CTRL_CEATA_INT_EN BIT(11)
	#define SDMMC_CTRL_SEND_AS_CCSD BIT(10)
	#define SDMMC_CTRL_SEND_CCSD BIT(9)
	#define SDMMC_CTRL_ABRT_READ_DATA BIT(8)
	#define SDMMC_CTRL_SEND_IRQ_RESP BIT(7)
	#define SDMMC_CTRL_READ_WAIT BIT(6)
	#define SDMMC_CTRL_DMA_ENABLE BIT(5)
	#define SDMMC_CTRL_INT_ENABLE BIT(4)
	#define SDMMC_CTRL_DMA_RESET BIT(2)
	#define SDMMC_CTRL_FIFO_RESET BIT(1)
	#define SDMMC_CTRL_RESET BIT(0)
	/* Clock Enable register defines */
	#define SDMMC_CLKEN_LOW_PWR BIT(16)
	#define SDMMC_CLKEN_ENABLE BIT(0)
	/* time-out register defines */
	#define SDMMC_TMOUT_DATA(n) _SBF(8, (n))
	#define SDMMC_TMOUT_DATA_MSK 0xFFFFFF00
	#define SDMMC_TMOUT_RESP(n) ((n) & 0xFF)
	#define SDMMC_TMOUT_RESP_MSK 0xFF
	/* card-type register defines */
	#define SDMMC_CTYPE_8BIT BIT(16)
	#define SDMMC_CTYPE_4BIT BIT(0)
	#define SDMMC_CTYPE_1BIT 0
	/* Interrupt status & mask register defines */
	#define SDMMC_INT_SDIO(n) BIT(16 + (n))
	#define SDMMC_INT_EBE BIT(15)
	#define SDMMC_INT_ACD BIT(14)
	#define SDMMC_INT_SBE BIT(13)
	#define SDMMC_INT_HLE BIT(12)
	#define SDMMC_INT_FRUN BIT(11)
	#define SDMMC_INT_HTO BIT(10)
	#define SDMMC_INT_VOLT_SWITCH BIT(10) /* overloads bit 10! */
	#define SDMMC_INT_DRTO BIT(9)
	#define SDMMC_INT_RTO BIT(8)
	#define SDMMC_INT_DCRC BIT(7)
	#define SDMMC_INT_RCRC BIT(6)
	#define SDMMC_INT_RXDR BIT(5)
	#define SDMMC_INT_TXDR BIT(4)
	#define SDMMC_INT_DATA_OVER BIT(3)
	#define SDMMC_INT_CMD_DONE BIT(2)
	#define SDMMC_INT_RESP_ERR BIT(1)
	#define SDMMC_INT_CD BIT(0)
	#define SDMMC_INT_ERROR 0xbfc2
	/* Command register defines */
	#define SDMMC_CMD_START BIT(31)
	#define SDMMC_CMD_USE_HOLD_REG BIT(29)
	#define SDMMC_CMD_VOLT_SWITCH BIT(28)
	#define SDMMC_CMD_CCS_EXP BIT(23)
	#define SDMMC_CMD_CEATA_RD BIT(22)
	#define SDMMC_CMD_UPD_CLK BIT(21)
	#define SDMMC_CMD_INIT BIT(15)
	#define SDMMC_CMD_STOP BIT(14)
	#define SDMMC_CMD_PRV_DAT_WAIT BIT(13)
	#define SDMMC_CMD_SEND_STOP BIT(12)
	#define SDMMC_CMD_STRM_MODE BIT(11)
	#define SDMMC_CMD_DAT_WR BIT(10)
	#define SDMMC_CMD_DAT_EXP BIT(9)
	#define SDMMC_CMD_RESP_CRC BIT(8)
	#define SDMMC_CMD_RESP_LONG BIT(7)
	#define SDMMC_CMD_RESP_EXP BIT(6)
	#define SDMMC_CMD_INDX(n) ((n) & 0x1F)
	/* Status register defines */
	#define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF)
	#define SDMMC_STATUS_DMA_REQ BIT(31)
	#define SDMMC_STATUS_BUSY BIT(9)
	/* FIFOTH register defines */
	#define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 \| \
	((r) & 0xFFF) << 16 \| \
	((t) & 0xFFF))
	/* Internal DMAC interrupt defines */
	#define SDMMC_IDMAC_INT_AI BIT(9)
	#define SDMMC_IDMAC_INT_NI BIT(8)
	#define SDMMC_IDMAC_INT_CES BIT(5)
	#define SDMMC_IDMAC_INT_DU BIT(4)
	#define SDMMC_IDMAC_INT_FBE BIT(2)
	#define SDMMC_IDMAC_INT_RI BIT(1)
	#define SDMMC_IDMAC_INT_TI BIT(0)
	/* Internal DMAC bus mode bits */
	#define SDMMC_IDMAC_ENABLE BIT(7)
	#define SDMMC_IDMAC_FB BIT(1)
	#define SDMMC_IDMAC_SWRESET BIT(0)
	/* Version ID register define */
	#define SDMMC_GET_VERID(x) ((x) & 0xFFFF)
	/* Card read threshold */
	#define SDMMC_SET_RD_THLD(v, x) (((v) & 0x1FFF) << 16 \| (x))
	#define SDMMC_UHS_18V BIT(0)
	/* All ctrl reset bits */
	#define SDMMC_CTRL_ALL_RESET_FLAGS \
	(SDMMC_CTRL_RESET \| SDMMC_CTRL_FIFO_RESET \| SDMMC_CTRL_DMA_RESET)

	/* FIFO register access macros. These should not change the data endian-ness
	* as they are written to memory to be dealt with by the upper layers */
	#define mci_fifo_readw(__reg) __raw_readw(__reg)
	#define mci_fifo_readl(__reg) __raw_readl(__reg)
	#define mci_fifo_readq(__reg) __raw_readq(__reg)

	#define mci_fifo_writew(__value, __reg) __raw_writew(__reg, __value)
	#define mci_fifo_writel(__value, __reg) __raw_writel(__reg, __value)
	#define mci_fifo_writeq(__value, __reg) __raw_writeq(__reg, __value)

	/* Register access macros */
	#define mci_readl(dev, reg) \
	readl_relaxed((dev)->regs + SDMMC_##reg)
	#define mci_writel(dev, reg, value) \
	writel_relaxed((value), (dev)->regs + SDMMC_##reg)

	/* 16-bit FIFO access macros */
	#define mci_readw(dev, reg) \
	readw_relaxed((dev)->regs + SDMMC_##reg)
	#define mci_writew(dev, reg, value) \
	writew_relaxed((value), (dev)->regs + SDMMC_##reg)

	/* 64-bit FIFO access macros */
	#ifdef readq
	#define mci_readq(dev, reg) \
	readq_relaxed((dev)->regs + SDMMC_##reg)
	#define mci_writeq(dev, reg, value) \
	writeq_relaxed((value), (dev)->regs + SDMMC_##reg)
	#else
	/*
	* Dummy readq implementation for architectures that don't define it.
	*
	* We would assume that none of these architectures would configure
	* the IP block with a 64bit FIFO width, so this code will never be
	* executed on those machines. Defining these macros here keeps the
	* rest of the code free from ifdefs.
	*/
	#define mci_readq(dev, reg) \
	((volatile u64 __force )((dev)->regs + SDMMC_##reg))
	#define mci_writeq(dev, reg, value) \
	((volatile u64 __force )((dev)->regs + SDMMC_##reg) = (value))

	#define __raw_writeq(__value, __reg) \
	((volatile u64 __force )(__reg) = (__value))
	#define __raw_readq(__reg) ((volatile u64 __force )(__reg))
	#endif

	extern int dw_mci_probe(struct dw_mci *host);
	extern void dw_mci_remove(struct dw_mci *host);
	#ifdef CONFIG_PM_SLEEP
	extern int dw_mci_suspend(struct dw_mci *host);
	extern int dw_mci_resume(struct dw_mci *host);
	#endif

	/**
	* struct dw_mci_slot - MMC slot state
	* @mmc: The mmc_host representing this slot.
	* @host: The MMC controller this slot is using.
	* @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
	* @ctype: Card type for this slot.
	* @mrq: mmc_request currently being processed or waiting to be
	* processed, or NULL when the slot is idle.
	* @queue_node: List node for placing this node in the @queue list of
	* &struct dw_mci.
	* @clock: Clock rate configured by set_ios(). Protected by host->lock.
	* @__clk_old: The last updated clock with reflecting clock divider.
	* Keeping track of this helps us to avoid spamming the console
	* with CONFIG_MMC_CLKGATE.
	* @flags: Random state bits associated with the slot.
	* @id: Number of this slot.
	* @sdio_id: Number of this slot in the SDIO interrupt registers.
	*/
	struct dw_mci_slot {
	struct mmc_host *mmc;
	struct dw_mci *host;

	int quirks;

	u32 ctype;

	struct mmc_request *mrq;
	struct list_head queue_node;

	unsigned int clock;
	unsigned int __clk_old;

	unsigned long flags;
	#define DW_MMC_CARD_PRESENT 0
	#define DW_MMC_CARD_NEED_INIT 1
	#define DW_MMC_CARD_NO_LOW_PWR 2
	int id;
	int sdio_id;
	};

	/**
	* dw_mci driver data - dw-mshc implementation specific driver data.
	* @caps: mmc subsystem specified capabilities of the controller(s).
	* @init: early implementation specific initialization.
	* @setup_clock: implementation specific clock configuration.
	* @prepare_command: handle CMD register extensions.
	* @set_ios: handle bus specific extensions.
	* @parse_dt: parse implementation specific device tree properties.
	* @execute_tuning: implementation specific tuning procedure.
	*
	* Provide controller implementation specific extensions. The usage of this
	* data structure is fully optional and usage of each member in this structure
	* is optional as well.
	*/
	struct dw_mci_drv_data {
	unsigned long *caps;
	int (init)(struct dw_mci host);
	int (setup_clock)(struct dw_mci host);
	void (prepare_command)(struct dw_mci host, u32 *cmdr);
	void (set_ios)(struct dw_mci host, struct mmc_ios *ios);
	int (parse_dt)(struct dw_mci host);
	int (execute_tuning)(struct dw_mci_slot slot);
	int (prepare_hs400_tuning)(struct dw_mci host,
	struct mmc_ios *ios);
	};
	#endif /* _DW_MMC_H_ */