brcmfmac: avoid using local usb data.
This patch removes usage of some of the local data in the usb
host interface driver. This is a step in the preperation to
support multiple USB devices.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 6e3ff6f..c6d5aeb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -80,20 +80,6 @@
USBOS_SUSPEND_STATE_SUSPENDED /* Device suspended */
};
-struct brcmf_usb_probe_info {
- void *usbdev_info;
- struct usb_device *usb; /* USB device pointer from OS */
- uint rx_pipe, tx_pipe, intr_pipe, rx_pipe2;
- int intr_size; /* Size of interrupt message */
- int interval; /* Interrupt polling interval */
- int vid;
- int pid;
- enum usb_device_speed device_speed;
- enum usbdev_suspend_state suspend_state;
- struct usb_interface *intf;
-};
-static struct brcmf_usb_probe_info usbdev_probe_info;
-
struct brcmf_usb_image {
void *data;
u32 len;
@@ -134,7 +120,6 @@
struct usb_device *usbdev;
struct device *dev;
- enum usb_device_speed device_speed;
int ctl_in_pipe, ctl_out_pipe;
struct urb *ctl_urb; /* URB for control endpoint */
@@ -154,9 +139,6 @@
int intr_size; /* Size of interrupt message */
int interval; /* Interrupt polling interval */
struct intr_transfer_buf intr; /* Data buffer for interrupt endpoint */
-
- struct brcmf_usb_probe_info probe_info;
-
};
static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
@@ -1166,11 +1148,8 @@
}
-static void brcmf_usb_detach(const struct brcmf_usbdev *bus_pub)
+static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
{
- struct brcmf_usbdev_info *devinfo =
- (struct brcmf_usbdev_info *)bus_pub;
-
brcmf_dbg(TRACE, "devinfo %p\n", devinfo);
/* store the image globally */
@@ -1187,7 +1166,6 @@
kfree(devinfo->tx_reqs);
kfree(devinfo->rx_reqs);
- kfree(devinfo);
}
#define TRX_MAGIC 0x30524448 /* "HDR0" */
@@ -1280,14 +1258,9 @@
static
-struct brcmf_usbdev *brcmf_usb_attach(int nrxq, int ntxq, struct device *dev)
+struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
+ int nrxq, int ntxq)
{
- struct brcmf_usbdev_info *devinfo;
-
- devinfo = kzalloc(sizeof(struct brcmf_usbdev_info), GFP_ATOMIC);
- if (devinfo == NULL)
- return NULL;
-
devinfo->bus_pub.nrxq = nrxq;
devinfo->rx_low_watermark = nrxq / 2;
devinfo->bus_pub.devinfo = devinfo;
@@ -1296,18 +1269,6 @@
/* flow control when too many tx urbs posted */
devinfo->tx_low_watermark = ntxq / 4;
devinfo->tx_high_watermark = devinfo->tx_low_watermark * 3;
- devinfo->dev = dev;
- devinfo->usbdev = usbdev_probe_info.usb;
- devinfo->tx_pipe = usbdev_probe_info.tx_pipe;
- devinfo->rx_pipe = usbdev_probe_info.rx_pipe;
- devinfo->rx_pipe2 = usbdev_probe_info.rx_pipe2;
- devinfo->intr_pipe = usbdev_probe_info.intr_pipe;
-
- devinfo->interval = usbdev_probe_info.interval;
- devinfo->intr_size = usbdev_probe_info.intr_size;
-
- memcpy(&devinfo->probe_info, &usbdev_probe_info,
- sizeof(struct brcmf_usb_probe_info));
devinfo->bus_pub.bus_mtu = BRCMF_USB_MAX_PKT_SIZE;
/* Initialize other structure content */
@@ -1366,19 +1327,19 @@
error:
brcmf_dbg(ERROR, "failed!\n");
- brcmf_usb_detach(&devinfo->bus_pub);
+ brcmf_usb_detach(devinfo);
return NULL;
}
-static int brcmf_usb_probe_cb(struct device *dev, const char *desc,
- u32 bustype, u32 hdrlen)
+static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
+ const char *desc, u32 bustype, u32 hdrlen)
{
struct brcmf_bus *bus = NULL;
struct brcmf_usbdev *bus_pub = NULL;
int ret;
+ struct device *dev = devinfo->dev;
-
- bus_pub = brcmf_usb_attach(BRCMF_USB_NRXQ, BRCMF_USB_NTXQ, dev);
+ bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
if (!bus_pub) {
ret = -ENODEV;
goto fail;
@@ -1417,23 +1378,21 @@
return 0;
fail:
/* Release resources in reverse order */
- if (bus_pub)
- brcmf_usb_detach(bus_pub);
kfree(bus);
+ brcmf_usb_detach(devinfo);
return ret;
}
static void
-brcmf_usb_disconnect_cb(struct brcmf_usbdev *bus_pub)
+brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo)
{
- if (!bus_pub)
+ if (!devinfo)
return;
- brcmf_dbg(TRACE, "enter: bus_pub %p\n", bus_pub);
+ brcmf_dbg(TRACE, "enter: bus_pub %p\n", devinfo);
- brcmf_detach(bus_pub->devinfo->dev);
- kfree(bus_pub->bus);
- brcmf_usb_detach(bus_pub);
-
+ brcmf_detach(devinfo->dev);
+ kfree(devinfo->bus_pub.bus);
+ brcmf_usb_detach(devinfo);
}
static int
@@ -1445,18 +1404,18 @@
struct usb_device *usb = interface_to_usbdev(intf);
int num_of_eps;
u8 endpoint_num;
+ struct brcmf_usbdev_info *devinfo;
brcmf_dbg(TRACE, "enter\n");
- usbdev_probe_info.usb = usb;
- usbdev_probe_info.intf = intf;
+ devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
+ if (devinfo == NULL)
+ return -ENOMEM;
- if (id != NULL) {
- usbdev_probe_info.vid = id->idVendor;
- usbdev_probe_info.pid = id->idProduct;
- }
+ devinfo->usbdev = usb;
+ devinfo->dev = &usb->dev;
- usb_set_intfdata(intf, &usbdev_probe_info);
+ usb_set_intfdata(intf, devinfo);
/* Check that the device supports only one configuration */
if (usb->descriptor.bNumConfigurations != 1) {
@@ -1505,11 +1464,11 @@
}
endpoint_num = endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- usbdev_probe_info.intr_pipe = usb_rcvintpipe(usb, endpoint_num);
+ devinfo->intr_pipe = usb_rcvintpipe(usb, endpoint_num);
- usbdev_probe_info.rx_pipe = 0;
- usbdev_probe_info.rx_pipe2 = 0;
- usbdev_probe_info.tx_pipe = 0;
+ devinfo->rx_pipe = 0;
+ devinfo->rx_pipe2 = 0;
+ devinfo->tx_pipe = 0;
num_of_eps = IFDESC(usb, BULK_IF).bNumEndpoints - 1;
/* Check data endpoints and get pipes */
@@ -1526,35 +1485,33 @@
USB_ENDPOINT_NUMBER_MASK;
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
== USB_DIR_IN) {
- if (!usbdev_probe_info.rx_pipe) {
- usbdev_probe_info.rx_pipe =
+ if (!devinfo->rx_pipe) {
+ devinfo->rx_pipe =
usb_rcvbulkpipe(usb, endpoint_num);
} else {
- usbdev_probe_info.rx_pipe2 =
+ devinfo->rx_pipe2 =
usb_rcvbulkpipe(usb, endpoint_num);
}
} else {
- usbdev_probe_info.tx_pipe =
- usb_sndbulkpipe(usb, endpoint_num);
+ devinfo->tx_pipe = usb_sndbulkpipe(usb, endpoint_num);
}
}
/* Allocate interrupt URB and data buffer */
/* RNDIS says 8-byte intr, our old drivers used 4-byte */
if (IFEPDESC(usb, CONTROL_IF, 0).wMaxPacketSize == cpu_to_le16(16))
- usbdev_probe_info.intr_size = 8;
+ devinfo->intr_size = 8;
else
- usbdev_probe_info.intr_size = 4;
+ devinfo->intr_size = 4;
- usbdev_probe_info.interval = IFEPDESC(usb, CONTROL_IF, 0).bInterval;
+ devinfo->interval = IFEPDESC(usb, CONTROL_IF, 0).bInterval;
- usbdev_probe_info.device_speed = usb->speed;
if (usb->speed == USB_SPEED_HIGH)
brcmf_dbg(INFO, "Broadcom high speed USB wireless device detected\n");
else
brcmf_dbg(INFO, "Broadcom full speed USB wireless device detected\n");
- ret = brcmf_usb_probe_cb(&usb->dev, "", USB_BUS, 0);
+ ret = brcmf_usb_probe_cb(devinfo, "", USB_BUS, 0);
if (ret)
goto fail;
@@ -1563,6 +1520,7 @@
fail:
brcmf_dbg(ERROR, "failed with errno %d\n", ret);
+ kfree(devinfo);
usb_set_intfdata(intf, NULL);
return ret;
@@ -1571,11 +1529,12 @@
static void
brcmf_usb_disconnect(struct usb_interface *intf)
{
- struct usb_device *usb = interface_to_usbdev(intf);
+ struct brcmf_usbdev_info *devinfo;
brcmf_dbg(TRACE, "enter\n");
- brcmf_usb_disconnect_cb(brcmf_usb_get_buspub(&usb->dev));
- usb_set_intfdata(intf, NULL);
+ devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
+ brcmf_usb_disconnect_cb(devinfo);
+ kfree(devinfo);
}
/*