| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| #ifndef __iwl_fh_h__ |
| #define __iwl_fh_h__ |
| |
| /****************************/ |
| /* Flow Handler Definitions */ |
| /****************************/ |
| |
| /** |
| * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) |
| * Addresses are offsets from device's PCI hardware base address. |
| */ |
| #define FH_MEM_LOWER_BOUND (0x1000) |
| #define FH_MEM_UPPER_BOUND (0x2000) |
| |
| /** |
| * Keep-Warm (KW) buffer base address. |
| * |
| * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the |
| * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency |
| * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host |
| * from going into a power-savings mode that would cause higher DRAM latency, |
| * and possible data over/under-runs, before all Tx/Rx is complete. |
| * |
| * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) |
| * of the buffer, which must be 4K aligned. Once this is set up, the 4965 |
| * automatically invokes keep-warm accesses when normal accesses might not |
| * be sufficient to maintain fast DRAM response. |
| * |
| * Bit fields: |
| * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned |
| */ |
| #define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) |
| |
| |
| /** |
| * TFD Circular Buffers Base (CBBC) addresses |
| * |
| * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident |
| * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) |
| * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 |
| * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte |
| * aligned (address bits 0-7 must be 0). |
| * |
| * Bit fields in each pointer register: |
| * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned |
| */ |
| #define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) |
| #define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) |
| |
| /* Find TFD CB base pointer for given queue (range 0-15). */ |
| #define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) |
| |
| |
| /** |
| * Rx SRAM Control and Status Registers (RSCSR) |
| * |
| * These registers provide handshake between driver and 4965 for the Rx queue |
| * (this queue handles *all* command responses, notifications, Rx data, etc. |
| * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx |
| * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can |
| * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer |
| * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 |
| * mapping between RBDs and RBs. |
| * |
| * Driver must allocate host DRAM memory for the following, and set the |
| * physical address of each into 4965 registers: |
| * |
| * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 |
| * entries (although any power of 2, up to 4096, is selectable by driver). |
| * Each entry (1 dword) points to a receive buffer (RB) of consistent size |
| * (typically 4K, although 8K or 16K are also selectable by driver). |
| * Driver sets up RB size and number of RBDs in the CB via Rx config |
| * register FH_MEM_RCSR_CHNL0_CONFIG_REG. |
| * |
| * Bit fields within one RBD: |
| * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned |
| * |
| * Driver sets physical address [35:8] of base of RBD circular buffer |
| * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. |
| * |
| * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers |
| * (RBs) have been filled, via a "write pointer", actually the index of |
| * the RB's corresponding RBD within the circular buffer. Driver sets |
| * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. |
| * |
| * Bit fields in lower dword of Rx status buffer (upper dword not used |
| * by driver; see struct iwl4965_shared, val0): |
| * 31-12: Not used by driver |
| * 11- 0: Index of last filled Rx buffer descriptor |
| * (4965 writes, driver reads this value) |
| * |
| * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must |
| * enter pointers to these RBs into contiguous RBD circular buffer entries, |
| * and update the 4965's "write" index register, |
| * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. |
| * |
| * This "write" index corresponds to the *next* RBD that the driver will make |
| * available, i.e. one RBD past the tail of the ready-to-fill RBDs within |
| * the circular buffer. This value should initially be 0 (before preparing any |
| * RBs), should be 8 after preparing the first 8 RBs (for example), and must |
| * wrap back to 0 at the end of the circular buffer (but don't wrap before |
| * "read" index has advanced past 1! See below). |
| * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. |
| * |
| * As the 4965 fills RBs (referenced from contiguous RBDs within the circular |
| * buffer), it updates the Rx status buffer in host DRAM, 2) described above, |
| * to tell the driver the index of the latest filled RBD. The driver must |
| * read this "read" index from DRAM after receiving an Rx interrupt from 4965. |
| * |
| * The driver must also internally keep track of a third index, which is the |
| * next RBD to process. When receiving an Rx interrupt, driver should process |
| * all filled but unprocessed RBs up to, but not including, the RB |
| * corresponding to the "read" index. For example, if "read" index becomes "1", |
| * driver may process the RB pointed to by RBD 0. Depending on volume of |
| * traffic, there may be many RBs to process. |
| * |
| * If read index == write index, 4965 thinks there is no room to put new data. |
| * Due to this, the maximum number of filled RBs is 255, instead of 256. To |
| * be safe, make sure that there is a gap of at least 2 RBDs between "write" |
| * and "read" indexes; that is, make sure that there are no more than 254 |
| * buffers waiting to be filled. |
| */ |
| #define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) |
| #define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) |
| #define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) |
| |
| /** |
| * Physical base address of 8-byte Rx Status buffer. |
| * Bit fields: |
| * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. |
| */ |
| #define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) |
| |
| /** |
| * Physical base address of Rx Buffer Descriptor Circular Buffer. |
| * Bit fields: |
| * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. |
| */ |
| #define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) |
| |
| /** |
| * Rx write pointer (index, really!). |
| * Bit fields: |
| * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. |
| * NOTE: For 256-entry circular buffer, use only bits [7:0]. |
| */ |
| #define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) |
| #define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) |
| |
| |
| /** |
| * Rx Config/Status Registers (RCSR) |
| * Rx Config Reg for channel 0 (only channel used) |
| * |
| * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for |
| * normal operation (see bit fields). |
| * |
| * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. |
| * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for |
| * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. |
| * |
| * Bit fields: |
| * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, |
| * '10' operate normally |
| * 29-24: reserved |
| * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), |
| * min "5" for 32 RBDs, max "12" for 4096 RBDs. |
| * 19-18: reserved |
| * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, |
| * '10' 12K, '11' 16K. |
| * 15-14: reserved |
| * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) |
| * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) |
| * typical value 0x10 (about 1/2 msec) |
| * 3- 0: reserved |
| */ |
| #define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) |
| #define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) |
| #define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) |
| |
| #define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) |
| |
| #define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ |
| #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ |
| #define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ |
| #define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ |
| #define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ |
| #define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ |
| |
| #define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) |
| #define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) |
| #define RX_RB_TIMEOUT (0x10) |
| |
| #define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) |
| #define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) |
| #define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) |
| |
| #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) |
| #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) |
| #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) |
| #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) |
| |
| #define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) |
| #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) |
| #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) |
| |
| #define FH_RSCSR_FRAME_SIZE_MSK (0x00003FFF) /* bits 0-13 */ |
| |
| /** |
| * Rx Shared Status Registers (RSSR) |
| * |
| * After stopping Rx DMA channel (writing 0 to |
| * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll |
| * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. |
| * |
| * Bit fields: |
| * 24: 1 = Channel 0 is idle |
| * |
| * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV |
| * contain default values that should not be altered by the driver. |
| */ |
| #define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) |
| #define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) |
| |
| #define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) |
| #define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) |
| #define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ |
| (FH_MEM_RSSR_LOWER_BOUND + 0x008) |
| |
| #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) |
| |
| #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 |
| |
| /* TFDB Area - TFDs buffer table */ |
| #define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) |
| #define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) |
| #define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) |
| #define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) |
| #define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) |
| |
| /** |
| * Transmit DMA Channel Control/Status Registers (TCSR) |
| * |
| * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels |
| * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, |
| * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. |
| * |
| * To use a Tx DMA channel, driver must initialize its |
| * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: |
| * |
| * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | |
| * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
| * |
| * All other bits should be 0. |
| * |
| * Bit fields: |
| * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, |
| * '10' operate normally |
| * 29- 4: Reserved, set to "0" |
| * 3: Enable internal DMA requests (1, normal operation), disable (0) |
| * 2- 0: Reserved, set to "0" |
| */ |
| #define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) |
| #define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) |
| |
| /* Find Control/Status reg for given Tx DMA/FIFO channel */ |
| #define FH49_TCSR_CHNL_NUM (7) |
| #define FH50_TCSR_CHNL_NUM (8) |
| |
| /* TCSR: tx_config register values */ |
| #define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ |
| (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) |
| #define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ |
| (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ |
| (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) |
| |
| #define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) |
| |
| #define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) |
| |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) |
| |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) |
| |
| #define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) |
| #define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) |
| |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) |
| |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) |
| #define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) |
| |
| /** |
| * Tx Shared Status Registers (TSSR) |
| * |
| * After stopping Tx DMA channel (writing 0 to |
| * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll |
| * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle |
| * (channel's buffers empty | no pending requests). |
| * |
| * Bit fields: |
| * 31-24: 1 = Channel buffers empty (channel 7:0) |
| * 23-16: 1 = No pending requests (channel 7:0) |
| */ |
| #define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) |
| #define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) |
| |
| #define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) |
| |
| /** |
| * Bit fields for TSSR(Tx Shared Status & Control) error status register: |
| * 31: Indicates an address error when accessed to internal memory |
| * uCode/driver must write "1" in order to clear this flag |
| * 30: Indicates that Host did not send the expected number of dwords to FH |
| * uCode/driver must write "1" in order to clear this flag |
| * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA |
| * command was received from the scheduler while the TRB was already full |
| * with previous command |
| * uCode/driver must write "1" in order to clear this flag |
| * 7-0: Each status bit indicates a channel's TxCredit error. When an error |
| * bit is set, it indicates that the FH has received a full indication |
| * from the RTC TxFIFO and the current value of the TxCredit counter was |
| * not equal to zero. This mean that the credit mechanism was not |
| * synchronized to the TxFIFO status |
| * uCode/driver must write "1" in order to clear this flag |
| */ |
| #define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) |
| |
| #define FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) ((1 << (_chnl)) << 24) |
| #define FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) ((1 << (_chnl)) << 16) |
| |
| #define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ |
| (FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ |
| FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) |
| |
| /* Tx service channels */ |
| #define FH_SRVC_CHNL (9) |
| #define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) |
| #define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) |
| #define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ |
| (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) |
| |
| #define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) |
| /* Instruct FH to increment the retry count of a packet when |
| * it is brought from the memory to TX-FIFO |
| */ |
| #define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) |
| |
| #define RX_QUEUE_SIZE 256 |
| #define RX_QUEUE_MASK 255 |
| #define RX_QUEUE_SIZE_LOG 8 |
| |
| /* |
| * RX related structures and functions |
| */ |
| #define RX_FREE_BUFFERS 64 |
| #define RX_LOW_WATERMARK 8 |
| |
| /* Size of one Rx buffer in host DRAM */ |
| #define IWL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */ |
| #define IWL_RX_BUF_SIZE_4K (4 * 1024) |
| #define IWL_RX_BUF_SIZE_8K (8 * 1024) |
| |
| /** |
| * struct iwl_rb_status - reseve buffer status |
| * host memory mapped FH registers |
| * @closed_rb_num [0:11] - Indicates the index of the RB which was closed |
| * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed |
| * @finished_rb_num [0:11] - Indicates the index of the current RB |
| * in which the last frame was written to |
| * @finished_fr_num [0:11] - Indicates the index of the RX Frame |
| * which was transfered |
| */ |
| struct iwl_rb_status { |
| __le16 closed_rb_num; |
| __le16 closed_fr_num; |
| __le16 finished_rb_num; |
| __le16 finished_fr_nam; |
| __le32 __unused; /* 3945 only */ |
| } __attribute__ ((packed)); |
| |
| |
| #define TFD_QUEUE_SIZE_MAX (256) |
| #define TFD_QUEUE_SIZE_BC_DUP (64) |
| #define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) |
| #define IWL_TX_DMA_MASK DMA_BIT_MASK(36) |
| #define IWL_NUM_OF_TBS 20 |
| |
| static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) |
| { |
| return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; |
| } |
| /** |
| * struct iwl_tfd_tb transmit buffer descriptor within transmit frame descriptor |
| * |
| * This structure contains dma address and length of transmission address |
| * |
| * @lo: low [31:0] portion of the dma address of TX buffer |
| * every even is unaligned on 16 bit boundary |
| * @hi_n_len 0-3 [35:32] portion of dma |
| * 4-15 length of the tx buffer |
| */ |
| struct iwl_tfd_tb { |
| __le32 lo; |
| __le16 hi_n_len; |
| } __attribute__((packed)); |
| |
| /** |
| * struct iwl_tfd |
| * |
| * Transmit Frame Descriptor (TFD) |
| * |
| * @ __reserved1[3] reserved |
| * @ num_tbs 0-4 number of active tbs |
| * 5 reserved |
| * 6-7 padding (not used) |
| * @ tbs[20] transmit frame buffer descriptors |
| * @ __pad padding |
| * |
| * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. |
| * Both driver and device share these circular buffers, each of which must be |
| * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes |
| * |
| * Driver must indicate the physical address of the base of each |
| * circular buffer via the FH_MEM_CBBC_QUEUE registers. |
| * |
| * Each TFD contains pointer/size information for up to 20 data buffers |
| * in host DRAM. These buffers collectively contain the (one) frame described |
| * by the TFD. Each buffer must be a single contiguous block of memory within |
| * itself, but buffers may be scattered in host DRAM. Each buffer has max size |
| * of (4K - 4). The concatenates all of a TFD's buffers into a single |
| * Tx frame, up to 8 KBytes in size. |
| * |
| * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. |
| */ |
| struct iwl_tfd { |
| u8 __reserved1[3]; |
| u8 num_tbs; |
| struct iwl_tfd_tb tbs[IWL_NUM_OF_TBS]; |
| __le32 __pad; |
| } __attribute__ ((packed)); |
| |
| /* Keep Warm Size */ |
| #define IWL_KW_SIZE 0x1000 /* 4k */ |
| |
| #endif /* !__iwl_fh_h__ */ |