| /* |
| * icom.h |
| * |
| * Copyright (C) 2001 Michael Anderson, IBM Corporation |
| * |
| * Serial device driver include file. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include<linux/serial_core.h> |
| |
| #define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) |
| static int icom_acfg_baud[] = { |
| 300, |
| 600, |
| 900, |
| 1200, |
| 1800, |
| 2400, |
| 3600, |
| 4800, |
| 7200, |
| 9600, |
| 14400, |
| 19200, |
| 28800, |
| 38400, |
| 57600, |
| 76800, |
| 115200, |
| 153600, |
| 230400, |
| 307200, |
| 460800, |
| }; |
| |
| struct icom_regs { |
| u32 control; /* Adapter Control Register */ |
| u32 interrupt; /* Adapter Interrupt Register */ |
| u32 int_mask; /* Adapter Interrupt Mask Reg */ |
| u32 int_pri; /* Adapter Interrupt Priority r */ |
| u32 int_reg_b; /* Adapter non-masked Interrupt */ |
| u32 resvd01; |
| u32 resvd02; |
| u32 resvd03; |
| u32 control_2; /* Adapter Control Register 2 */ |
| u32 interrupt_2; /* Adapter Interrupt Register 2 */ |
| u32 int_mask_2; /* Adapter Interrupt Mask 2 */ |
| u32 int_pri_2; /* Adapter Interrupt Prior 2 */ |
| u32 int_reg_2b; /* Adapter non-masked 2 */ |
| }; |
| |
| struct func_dram { |
| u32 reserved[108]; /* 0-1B0 reserved by personality code */ |
| u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ |
| u8 RcvStnAddr; /* 1B4 Receive Station Addr */ |
| u8 IdleState; /* 1B5 Idle State */ |
| u8 IdleMonitor; /* 1B6 Idle Monitor */ |
| u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ |
| u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ |
| u8 StartXmitCmd; /* 1BC Start Xmit Command */ |
| u8 HDLCConfigReg; /* 1BD Reserved */ |
| u8 CauseCode; /* 1BE Cause code for fatal error */ |
| u8 xchar; /* 1BF High priority send */ |
| u32 reserved3; /* 1C0-1C3 Reserved */ |
| u8 PrevCmdReg; /* 1C4 Reserved */ |
| u8 CmdReg; /* 1C5 Command Register */ |
| u8 async_config2; /* 1C6 Async Config Byte 2 */ |
| u8 async_config3; /* 1C7 Async Config Byte 3 */ |
| u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ |
| u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ |
| u8 misc_flags; /* 1DD misc flags */ |
| #define V2_HARDWARE 0x40 |
| #define ICOM_HDW_ACTIVE 0x01 |
| u8 call_length; /* 1DE Phone #/CFI buff ln */ |
| u8 call_length2; /* 1DF Upper byte (unused) */ |
| u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ |
| u16 timer_value; /* 1E4-1E5 general timer value */ |
| u8 timer_command; /* 1E6 general timer cmd */ |
| u8 dce_command; /* 1E7 dce command reg */ |
| u8 dce_cmd_status; /* 1E8 dce command stat */ |
| u8 x21_r1_ioff; /* 1E9 dce ready counter */ |
| u8 x21_r0_ioff; /* 1EA dce not ready ctr */ |
| u8 x21_ralt_ioff; /* 1EB dce CNR counter */ |
| u8 x21_r1_ion; /* 1EC dce ready I on ctr */ |
| u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ |
| u8 ier; /* 1EE Interrupt Enable */ |
| u8 isr; /* 1EF Input Signal Reg */ |
| u8 osr; /* 1F0 Output Signal Reg */ |
| u8 reset; /* 1F1 Reset/Reload Reg */ |
| u8 disable; /* 1F2 Disable Reg */ |
| u8 sync; /* 1F3 Sync Reg */ |
| u8 error_stat; /* 1F4 Error Status */ |
| u8 cable_id; /* 1F5 Cable ID */ |
| u8 cs_length; /* 1F6 CS Load Length */ |
| u8 mac_length; /* 1F7 Mac Load Length */ |
| u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ |
| u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ |
| }; |
| |
| /* |
| * adapter defines and structures |
| */ |
| #define ICOM_CONTROL_START_A 0x00000008 |
| #define ICOM_CONTROL_STOP_A 0x00000004 |
| #define ICOM_CONTROL_START_B 0x00000002 |
| #define ICOM_CONTROL_STOP_B 0x00000001 |
| #define ICOM_CONTROL_START_C 0x00000008 |
| #define ICOM_CONTROL_STOP_C 0x00000004 |
| #define ICOM_CONTROL_START_D 0x00000002 |
| #define ICOM_CONTROL_STOP_D 0x00000001 |
| #define ICOM_IRAM_OFFSET 0x1000 |
| #define ICOM_IRAM_SIZE 0x0C00 |
| #define ICOM_DCE_IRAM_OFFSET 0x0A00 |
| #define ICOM_CABLE_ID_VALID 0x01 |
| #define ICOM_CABLE_ID_MASK 0xF0 |
| #define ICOM_DISABLE 0x80 |
| #define CMD_XMIT_RCV_ENABLE 0xC0 |
| #define CMD_XMIT_ENABLE 0x40 |
| #define CMD_RCV_DISABLE 0x00 |
| #define CMD_RCV_ENABLE 0x80 |
| #define CMD_RESTART 0x01 |
| #define CMD_HOLD_XMIT 0x02 |
| #define CMD_SND_BREAK 0x04 |
| #define RS232_CABLE 0x06 |
| #define V24_CABLE 0x0E |
| #define V35_CABLE 0x0C |
| #define V36_CABLE 0x02 |
| #define NO_CABLE 0x00 |
| #define START_DOWNLOAD 0x80 |
| #define ICOM_INT_MASK_PRC_A 0x00003FFF |
| #define ICOM_INT_MASK_PRC_B 0x3FFF0000 |
| #define ICOM_INT_MASK_PRC_C 0x00003FFF |
| #define ICOM_INT_MASK_PRC_D 0x3FFF0000 |
| #define INT_RCV_COMPLETED 0x1000 |
| #define INT_XMIT_COMPLETED 0x2000 |
| #define INT_IDLE_DETECT 0x0800 |
| #define INT_RCV_DISABLED 0x0400 |
| #define INT_XMIT_DISABLED 0x0200 |
| #define INT_RCV_XMIT_SHUTDOWN 0x0100 |
| #define INT_FATAL_ERROR 0x0080 |
| #define INT_CABLE_PULL 0x0020 |
| #define INT_SIGNAL_CHANGE 0x0010 |
| #define HDLC_PPP_PURE_ASYNC 0x02 |
| #define HDLC_FF_FILL 0x00 |
| #define HDLC_HDW_FLOW 0x01 |
| #define START_XMIT 0x80 |
| #define ICOM_ACFG_DRIVE1 0x20 |
| #define ICOM_ACFG_NO_PARITY 0x00 |
| #define ICOM_ACFG_PARITY_ENAB 0x02 |
| #define ICOM_ACFG_PARITY_ODD 0x01 |
| #define ICOM_ACFG_8BPC 0x00 |
| #define ICOM_ACFG_7BPC 0x04 |
| #define ICOM_ACFG_6BPC 0x08 |
| #define ICOM_ACFG_5BPC 0x0C |
| #define ICOM_ACFG_1STOP_BIT 0x00 |
| #define ICOM_ACFG_2STOP_BIT 0x10 |
| #define ICOM_DTR 0x80 |
| #define ICOM_RTS 0x40 |
| #define ICOM_RI 0x08 |
| #define ICOM_DSR 0x80 |
| #define ICOM_DCD 0x20 |
| #define ICOM_CTS 0x40 |
| |
| #define NUM_XBUFFS 1 |
| #define NUM_RBUFFS 2 |
| #define RCV_BUFF_SZ 0x0200 |
| #define XMIT_BUFF_SZ 0x1000 |
| struct statusArea { |
| /**********************************************/ |
| /* Transmit Status Area */ |
| /**********************************************/ |
| struct xmit_status_area{ |
| u32 leNext; /* Next entry in Little Endian on Adapter */ |
| u32 leNextASD; |
| u32 leBuffer; /* Buffer for entry in LE for Adapter */ |
| u16 leLengthASD; |
| u16 leOffsetASD; |
| u16 leLength; /* Length of data in segment */ |
| u16 flags; |
| #define SA_FLAGS_DONE 0x0080 /* Done with Segment */ |
| #define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ |
| #define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ |
| #define SA_FLAGS_READY_TO_XMIT 0x0800 |
| #define SA_FLAGS_STAT_MASK 0x007F |
| } xmit[NUM_XBUFFS]; |
| |
| /**********************************************/ |
| /* Receive Status Area */ |
| /**********************************************/ |
| struct { |
| u32 leNext; /* Next entry in Little Endian on Adapter */ |
| u32 leNextASD; |
| u32 leBuffer; /* Buffer for entry in LE for Adapter */ |
| u16 WorkingLength; /* size of segment */ |
| u16 reserv01; |
| u16 leLength; /* Length of data in segment */ |
| u16 flags; |
| #define SA_FL_RCV_DONE 0x0010 /* Data ready */ |
| #define SA_FLAGS_OVERRUN 0x0040 |
| #define SA_FLAGS_PARITY_ERROR 0x0080 |
| #define SA_FLAGS_FRAME_ERROR 0x0001 |
| #define SA_FLAGS_FRAME_TRUNC 0x0002 |
| #define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ |
| #define SA_FLAGS_RCV_MASK 0xFFE6 |
| } rcv[NUM_RBUFFS]; |
| }; |
| |
| struct icom_adapter; |
| |
| |
| #define ICOM_MAJOR 243 |
| #define ICOM_MINOR_START 0 |
| |
| struct icom_port { |
| struct uart_port uart_port; |
| u8 imbed_modem; |
| #define ICOM_UNKNOWN 1 |
| #define ICOM_RVX 2 |
| #define ICOM_IMBED_MODEM 3 |
| unsigned char cable_id; |
| unsigned char read_status_mask; |
| unsigned char ignore_status_mask; |
| void __iomem * int_reg; |
| struct icom_regs __iomem *global_reg; |
| struct func_dram __iomem *dram; |
| int port; |
| struct statusArea *statStg; |
| dma_addr_t statStg_pci; |
| u32 *xmitRestart; |
| dma_addr_t xmitRestart_pci; |
| unsigned char *xmit_buf; |
| dma_addr_t xmit_buf_pci; |
| unsigned char *recv_buf; |
| dma_addr_t recv_buf_pci; |
| int next_rcv; |
| int put_length; |
| int status; |
| #define ICOM_PORT_ACTIVE 1 /* Port exists. */ |
| #define ICOM_PORT_OFF 0 /* Port does not exist. */ |
| int load_in_progress; |
| struct icom_adapter *adapter; |
| }; |
| |
| struct icom_adapter { |
| void __iomem * base_addr; |
| unsigned long base_addr_pci; |
| unsigned char irq_number; |
| struct pci_dev *pci_dev; |
| struct icom_port port_info[4]; |
| int index; |
| int version; |
| #define ADAPTER_V1 0x0001 |
| #define ADAPTER_V2 0x0002 |
| u32 subsystem_id; |
| #define FOUR_PORT_MODEL 0x0252 |
| #define V2_TWO_PORTS_RVX 0x021A |
| #define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 |
| int numb_ports; |
| struct list_head icom_adapter_entry; |
| struct kobject kobj; |
| }; |
| |
| /* prototype */ |
| extern void iCom_sercons_init(void); |
| |
| struct lookup_proc_table { |
| u32 __iomem *global_control_reg; |
| unsigned long processor_id; |
| }; |
| |
| struct lookup_int_table { |
| u32 __iomem *global_int_mask; |
| unsigned long processor_id; |
| }; |