blob: 225ee545e1a05e36bfa25eb6a214102b8be8c0bf [file] [log] [blame]
/* thread_info.h: low-level thread information
*
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
* - Incorporating suggestions made by Linus Torvalds and Dave Miller
*/
#ifndef _ASM_X86_THREAD_INFO_H
#define _ASM_X86_THREAD_INFO_H
#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/percpu.h>
#include <asm/types.h>
/*
* TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
* reserve at the top of the kernel stack. We do it because of a nasty
* 32-bit corner case. On x86_32, the hardware stack frame is
* variable-length. Except for vm86 mode, struct pt_regs assumes a
* maximum-length frame. If we enter from CPL 0, the top 8 bytes of
* pt_regs don't actually exist. Ordinarily this doesn't matter, but it
* does in at least one case:
*
* If we take an NMI early enough in SYSENTER, then we can end up with
* pt_regs that extends above sp0. On the way out, in the espfix code,
* we can read the saved SS value, but that value will be above sp0.
* Without this offset, that can result in a page fault. (We are
* careful that, in this case, the value we read doesn't matter.)
*
* In vm86 mode, the hardware frame is much longer still, but we neither
* access the extra members from NMI context, nor do we write such a
* frame at sp0 at all.
*
* x86_64 has a fixed-length stack frame.
*/
#ifdef CONFIG_X86_32
# define TOP_OF_KERNEL_STACK_PADDING 8
#else
# define TOP_OF_KERNEL_STACK_PADDING 0
#endif
/*
* low level task data that entry.S needs immediate access to
* - this struct should fit entirely inside of one cache line
* - this struct shares the supervisor stack pages
*/
#ifndef __ASSEMBLY__
struct task_struct;
#include <asm/processor.h>
#include <linux/atomic.h>
struct thread_info {
struct task_struct *task; /* main task structure */
__u32 flags; /* low level flags */
__u32 status; /* thread synchronous flags */
__u32 cpu; /* current CPU */
int saved_preempt_count;
mm_segment_t addr_limit;
void __user *sysenter_return;
unsigned int sig_on_uaccess_error:1;
unsigned int uaccess_err:1; /* uaccess failed */
};
#define INIT_THREAD_INFO(tsk) \
{ \
.task = &tsk, \
.flags = 0, \
.cpu = 0, \
.saved_preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
}
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
#else /* !__ASSEMBLY__ */
#include <asm/asm-offsets.h>
#endif
/*
* thread information flags
* - these are process state flags that various assembly files
* may need to access
* - pending work-to-be-done flags are in LSW
* - other flags in MSW
* Warning: layout of LSW is hardcoded in entry.S
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/
#define TIF_SYSCALL_EMU 6 /* syscall emulation active */
#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
#define TIF_SECCOMP 8 /* secure computing */
#define TIF_USER_RETURN_NOTIFY 11 /* notify kernel of userspace return */
#define TIF_UPROBE 12 /* breakpointed or singlestepping */
#define TIF_NOTSC 16 /* TSC is not accessible in userland */
#define TIF_IA32 17 /* IA32 compatibility process */
#define TIF_FORK 18 /* ret_from_fork */
#define TIF_NOHZ 19 /* in adaptive nohz mode */
#define TIF_MEMDIE 20 /* is terminating due to OOM killer */
#define TIF_POLLING_NRFLAG 21 /* idle is polling for TIF_NEED_RESCHED */
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */
#define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */
#define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */
#define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */
#define TIF_ADDR32 29 /* 32-bit address space on 64 bits */
#define TIF_X32 30 /* 32-bit native x86-64 binary */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
#define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
#define _TIF_UPROBE (1 << TIF_UPROBE)
#define _TIF_NOTSC (1 << TIF_NOTSC)
#define _TIF_IA32 (1 << TIF_IA32)
#define _TIF_FORK (1 << TIF_FORK)
#define _TIF_NOHZ (1 << TIF_NOHZ)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
#define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
#define _TIF_ADDR32 (1 << TIF_ADDR32)
#define _TIF_X32 (1 << TIF_X32)
/* work to do in syscall_trace_enter() */
#define _TIF_WORK_SYSCALL_ENTRY \
(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | \
_TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT | \
_TIF_NOHZ)
/* work to do in syscall_trace_leave() */
#define _TIF_WORK_SYSCALL_EXIT \
(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP | \
_TIF_SYSCALL_TRACEPOINT | _TIF_NOHZ)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
(0x0000FFFF & \
~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT| \
_TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
/* work to do on any return to user space */
#define _TIF_ALLWORK_MASK \
((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT | \
_TIF_NOHZ)
/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK \
(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
_TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)
/* flags to check in __switch_to() */
#define _TIF_WORK_CTXSW \
(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
#define STACK_WARN (THREAD_SIZE/8)
/*
* macros/functions for gaining access to the thread information structure
*
* preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
static inline struct thread_info *current_thread_info(void)
{
return (struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
}
static inline unsigned long current_stack_pointer(void)
{
unsigned long sp;
#ifdef CONFIG_X86_64
asm("mov %%rsp,%0" : "=g" (sp));
#else
asm("mov %%esp,%0" : "=g" (sp));
#endif
return sp;
}
#else /* !__ASSEMBLY__ */
#ifdef CONFIG_X86_64
# define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
#endif
/* Load thread_info address into "reg" */
#define GET_THREAD_INFO(reg) \
_ASM_MOV PER_CPU_VAR(cpu_current_top_of_stack),reg ; \
_ASM_SUB $(THREAD_SIZE),reg ;
/*
* ASM operand which evaluates to a 'thread_info' address of
* the current task, if it is known that "reg" is exactly "off"
* bytes below the top of the stack currently.
*
* ( The kernel stack's size is known at build time, it is usually
* 2 or 4 pages, and the bottom of the kernel stack contains
* the thread_info structure. So to access the thread_info very
* quickly from assembly code we can calculate down from the
* top of the kernel stack to the bottom, using constant,
* build-time calculations only. )
*
* For example, to fetch the current thread_info->flags value into %eax
* on x86-64 defconfig kernels, in syscall entry code where RSP is
* currently at exactly SIZEOF_PTREGS bytes away from the top of the
* stack:
*
* mov ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS), %eax
*
* will translate to:
*
* 8b 84 24 b8 c0 ff ff mov -0x3f48(%rsp), %eax
*
* which is below the current RSP by almost 16K.
*/
#define ASM_THREAD_INFO(field, reg, off) ((field)+(off)-THREAD_SIZE)(reg)
#endif
/*
* Thread-synchronous status.
*
* This is different from the flags in that nobody else
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
#ifndef __ASSEMBLY__
#define HAVE_SET_RESTORE_SIGMASK 1
static inline void set_restore_sigmask(void)
{
struct thread_info *ti = current_thread_info();
ti->status |= TS_RESTORE_SIGMASK;
WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
}
static inline void clear_restore_sigmask(void)
{
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
}
static inline bool test_restore_sigmask(void)
{
return current_thread_info()->status & TS_RESTORE_SIGMASK;
}
static inline bool test_and_clear_restore_sigmask(void)
{
struct thread_info *ti = current_thread_info();
if (!(ti->status & TS_RESTORE_SIGMASK))
return false;
ti->status &= ~TS_RESTORE_SIGMASK;
return true;
}
static inline bool is_ia32_task(void)
{
#ifdef CONFIG_X86_32
return true;
#endif
#ifdef CONFIG_IA32_EMULATION
if (current_thread_info()->status & TS_COMPAT)
return true;
#endif
return false;
}
/*
* Force syscall return via IRET by making it look as if there was
* some work pending. IRET is our most capable (but slowest) syscall
* return path, which is able to restore modified SS, CS and certain
* EFLAGS values that other (fast) syscall return instructions
* are not able to restore properly.
*/
#define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)
#endif /* !__ASSEMBLY__ */
#ifndef __ASSEMBLY__
extern void arch_task_cache_init(void);
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
extern void arch_release_task_struct(struct task_struct *tsk);
#endif
#endif /* _ASM_X86_THREAD_INFO_H */