ALSA: als4000: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 2b2bb0f..b751c38 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -578,7 +578,7 @@
snd_als4k_iobase_readb(chip->alt_port,
ALS4K_IOB_16_ACK_FOR_CR1E);
- /* printk(KERN_INFO "als4000: irq 0x%04x 0x%04x\n",
+ /* dev_dbg(chip->card->dev, "als4000: irq 0x%04x 0x%04x\n",
pci_irqstatus, sb_irqstatus); */
/* only ack the things we actually handled above */
@@ -791,13 +791,13 @@
}
if (!r) {
- printk(KERN_WARNING "als4000: cannot reserve joystick ports\n");
+ dev_warn(&acard->pci->dev, "cannot reserve joystick ports\n");
return -EBUSY;
}
acard->gameport = gp = gameport_allocate_port();
if (!gp) {
- printk(KERN_ERR "als4000: cannot allocate memory for gameport\n");
+ dev_err(&acard->pci->dev, "cannot allocate memory for gameport\n");
release_and_free_resource(r);
return -ENOMEM;
}
@@ -873,7 +873,7 @@
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, DMA_BIT_MASK(24)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(24)) < 0) {
- snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
+ dev_err(&pci->dev, "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -933,7 +933,7 @@
MPU401_INFO_INTEGRATED |
MPU401_INFO_IRQ_HOOK,
-1, &chip->rmidi)) < 0) {
- printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n",
+ dev_err(&pci->dev, "no MPU-401 device at 0x%lx?\n",
iobase + ALS4K_IOB_30_MIDI_DATA);
goto out_err;
}
@@ -954,7 +954,7 @@
iobase + ALS4K_IOB_10_ADLIB_ADDR0,
iobase + ALS4K_IOB_12_ADLIB_ADDR2,
OPL3_HW_AUTO, 1, &opl3) < 0) {
- printk(KERN_ERR "als4000: no OPL device at 0x%lx-0x%lx?\n",
+ dev_err(&pci->dev, "no OPL device at 0x%lx-0x%lx?\n",
iobase + ALS4K_IOB_10_ADLIB_ADDR0,
iobase + ALS4K_IOB_12_ADLIB_ADDR2);
} else {
@@ -1014,8 +1014,7 @@
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "als4000: pci_enable_device failed, "
- "disabling device\n");
+ dev_err(dev, "pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}