V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modes
The S5H1411 demodulator is now enabled.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index bcf6d9b..27635cd 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -58,6 +58,7 @@
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select DVB_S5H1411 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 620159d..2b6b283 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1591,6 +1591,7 @@
.vmux = 2,
.gpio0 = 0x16d9,
}},
+ .mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_PROLINK_PV_8000GT] = {
.name = "Prolink Pixelview MPEG 8000GT",
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f1251b8..1c7fe68 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -47,6 +47,7 @@
#include "isl6421.h"
#include "tuner-simple.h"
#include "tda9887.h"
+#include "s5h1411.h"
MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
@@ -463,6 +464,22 @@
.no_tuner = 1,
};
+static struct s5h1411_config dvico_fusionhdtv7_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_ON,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING
+};
+
+static struct xc5000_config dvico_fusionhdtv7_tuner_config = {
+ .i2c_address = 0xc2 >> 1,
+ .if_khz = 5380,
+ .tuner_callback = cx88_tuner_callback,
+};
+
static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
{
struct dvb_frontend *fe;
@@ -844,6 +861,21 @@
if (attach_xc3028(0x61, dev) < 0)
return -EINVAL;
break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ dev->dvb.frontend = dvb_attach(s5h1411_attach,
+ &dvico_fusionhdtv7_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ /* tuner_config.video_dev must point to
+ * i2c_adap.algo_data
+ */
+ dvico_fusionhdtv7_tuner_config.priv =
+ dev->core->i2c_adap.algo_data;
+ dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap,
+ &dvico_fusionhdtv7_tuner_config);
+ }
+ break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);