drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)
This enables the use of interrupts on r6xx/r7xx hardware.
Interrupts are implemented via a ring buffer. The GPU adds
interrupts vectors to the ring and the host reads them off
in the interrupt handler. The interrupt controller requires
firmware like the CP. This firmware must be installed and
accessble to the firmware loader for interrupts to function.
MSIs don't seem to work on my RS780. They work fine on all
my discrete cards. I'm not sure about other RS780s or
RS880s. I've disabled MSIs on RS780 and RS880, but it would
probably be worth checking on some other systems.
v2 - fix some checkpatch.pl problems;
re-read the disp int status reg if we restart the ih;
v3 - remove the irq handler if r600_irq_init() fails;
remove spinlock in r600_ih_ring_fini();
move ih rb overflow check to r600_get_ih_wptr();
move irq ack to separate function;
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 3dbd93e..5067ab7 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -38,8 +38,10 @@
#define PFP_UCODE_SIZE 576
#define PM4_UCODE_SIZE 1792
+#define RLC_UCODE_SIZE 768
#define R700_PFP_UCODE_SIZE 848
#define R700_PM4_UCODE_SIZE 1360
+#define R700_RLC_UCODE_SIZE 1024
/* Firmware Names */
MODULE_FIRMWARE("radeon/R600_pfp.bin");
@@ -62,6 +64,8 @@
MODULE_FIRMWARE("radeon/RV730_me.bin");
MODULE_FIRMWARE("radeon/RV710_pfp.bin");
MODULE_FIRMWARE("radeon/RV710_me.bin");
+MODULE_FIRMWARE("radeon/R600_rlc.bin");
+MODULE_FIRMWARE("radeon/R700_rlc.bin");
int r600_debugfs_mc_info_init(struct radeon_device *rdev);
@@ -1114,11 +1118,12 @@
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
}
-int r600_cp_init_microcode(struct radeon_device *rdev)
+int r600_init_microcode(struct radeon_device *rdev)
{
struct platform_device *pdev;
const char *chip_name;
- size_t pfp_req_size, me_req_size;
+ const char *rlc_chip_name;
+ size_t pfp_req_size, me_req_size, rlc_req_size;
char fw_name[30];
int err;
@@ -1132,30 +1137,62 @@
}
switch (rdev->family) {
- case CHIP_R600: chip_name = "R600"; break;
- case CHIP_RV610: chip_name = "RV610"; break;
- case CHIP_RV630: chip_name = "RV630"; break;
- case CHIP_RV620: chip_name = "RV620"; break;
- case CHIP_RV635: chip_name = "RV635"; break;
- case CHIP_RV670: chip_name = "RV670"; break;
+ case CHIP_R600:
+ chip_name = "R600";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV610:
+ chip_name = "RV610";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV630:
+ chip_name = "RV630";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV620:
+ chip_name = "RV620";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV635:
+ chip_name = "RV635";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV670:
+ chip_name = "RV670";
+ rlc_chip_name = "R600";
+ break;
case CHIP_RS780:
- case CHIP_RS880: chip_name = "RS780"; break;
- case CHIP_RV770: chip_name = "RV770"; break;
+ case CHIP_RS880:
+ chip_name = "RS780";
+ rlc_chip_name = "R600";
+ break;
+ case CHIP_RV770:
+ chip_name = "RV770";
+ rlc_chip_name = "R700";
+ break;
case CHIP_RV730:
- case CHIP_RV740: chip_name = "RV730"; break;
- case CHIP_RV710: chip_name = "RV710"; break;
+ case CHIP_RV740:
+ chip_name = "RV730";
+ rlc_chip_name = "R700";
+ break;
+ case CHIP_RV710:
+ chip_name = "RV710";
+ rlc_chip_name = "R700";
+ break;
default: BUG();
}
if (rdev->family >= CHIP_RV770) {
pfp_req_size = R700_PFP_UCODE_SIZE * 4;
me_req_size = R700_PM4_UCODE_SIZE * 4;
+ rlc_req_size = R700_RLC_UCODE_SIZE * 4;
} else {
pfp_req_size = PFP_UCODE_SIZE * 4;
me_req_size = PM4_UCODE_SIZE * 12;
+ rlc_req_size = RLC_UCODE_SIZE * 4;
}
- DRM_INFO("Loading %s CP Microcode\n", chip_name);
+ DRM_INFO("Loading %s Microcode\n", chip_name);
snprintf(fw_name, sizeof(fw_name), "radeon/%s_pfp.bin", chip_name);
err = request_firmware(&rdev->pfp_fw, fw_name, &pdev->dev);
@@ -1179,6 +1216,18 @@
rdev->me_fw->size, fw_name);
err = -EINVAL;
}
+
+ snprintf(fw_name, sizeof(fw_name), "radeon/%s_rlc.bin", rlc_chip_name);
+ err = request_firmware(&rdev->rlc_fw, fw_name, &pdev->dev);
+ if (err)
+ goto out;
+ if (rdev->rlc_fw->size != rlc_req_size) {
+ printk(KERN_ERR
+ "r600_rlc: Bogus length %zu in firmware \"%s\"\n",
+ rdev->rlc_fw->size, fw_name);
+ err = -EINVAL;
+ }
+
out:
platform_device_unregister(pdev);
@@ -1191,6 +1240,8 @@
rdev->pfp_fw = NULL;
release_firmware(rdev->me_fw);
rdev->me_fw = NULL;
+ release_firmware(rdev->rlc_fw);
+ rdev->rlc_fw = NULL;
}
return err;
}
@@ -1437,10 +1488,14 @@
void r600_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
+ /* Also consider EVENT_WRITE_EOP. it handles the interrupts + timestamps + events */
/* Emit fence sequence & fire IRQ */
radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
radeon_ring_write(rdev, ((rdev->fence_drv.scratch_reg - PACKET3_SET_CONFIG_REG_OFFSET) >> 2));
radeon_ring_write(rdev, fence->seq);
+ /* CP_INTERRUPT packet 3 no longer exists, use packet 0 */
+ radeon_ring_write(rdev, PACKET0(CP_INT_STATUS, 0));
+ radeon_ring_write(rdev, RB_INT_STAT);
}
int r600_copy_dma(struct radeon_device *rdev,
@@ -1463,18 +1518,6 @@
return 0;
}
-int r600_irq_process(struct radeon_device *rdev)
-{
- /* FIXME: implement */
- return 0;
-}
-
-int r600_irq_set(struct radeon_device *rdev)
-{
- /* FIXME: implement */
- return 0;
-}
-
int r600_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
uint32_t offset, uint32_t obj_size)
@@ -1527,6 +1570,16 @@
return r;
}
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ r = r600_irq_init(rdev);
+ if (r) {
+ DRM_ERROR("radeon: IH init failed (%d).\n", r);
+ radeon_irq_kms_fini(rdev);
+ return r;
+ }
+ r600_irq_set(rdev);
+
r = radeon_ring_init(rdev, rdev->cp.ring_size);
if (r)
return r;
@@ -1661,11 +1714,19 @@
r = radeon_object_init(rdev);
if (r)
return r;
+
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+
rdev->cp.ring_obj = NULL;
r600_ring_init(rdev, 1024 * 1024);
- if (!rdev->me_fw || !rdev->pfp_fw) {
- r = r600_cp_init_microcode(rdev);
+ rdev->ih.ring_obj = NULL;
+ r600_ih_ring_init(rdev, 64 * 1024);
+
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
+ r = r600_init_microcode(rdev);
if (r) {
DRM_ERROR("Failed to load firmware!\n");
return r;
@@ -1712,6 +1773,8 @@
r600_suspend(rdev);
r600_blit_fini(rdev);
+ r600_irq_fini(rdev);
+ radeon_irq_kms_fini(rdev);
radeon_ring_fini(rdev);
r600_wb_fini(rdev);
r600_pcie_gart_fini(rdev);
@@ -1806,8 +1869,452 @@
return r;
}
+/*
+ * Interrupts
+ *
+ * Interrupts use a ring buffer on r6xx/r7xx hardware. It works pretty
+ * the same as the CP ring buffer, but in reverse. Rather than the CPU
+ * writing to the ring and the GPU consuming, the GPU writes to the ring
+ * and host consumes. As the host irq handler processes interrupts, it
+ * increments the rptr. When the rptr catches up with the wptr, all the
+ * current interrupts have been processed.
+ */
+void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size)
+{
+ u32 rb_bufsz;
+ /* Align ring size */
+ rb_bufsz = drm_order(ring_size / 4);
+ ring_size = (1 << rb_bufsz) * 4;
+ rdev->ih.ring_size = ring_size;
+ rdev->ih.align_mask = 4 - 1;
+}
+
+static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size)
+{
+ int r;
+
+ rdev->ih.ring_size = ring_size;
+ /* Allocate ring buffer */
+ if (rdev->ih.ring_obj == NULL) {
+ r = radeon_object_create(rdev, NULL, rdev->ih.ring_size,
+ true,
+ RADEON_GEM_DOMAIN_GTT,
+ false,
+ &rdev->ih.ring_obj);
+ if (r) {
+ DRM_ERROR("radeon: failed to create ih ring buffer (%d).\n", r);
+ return r;
+ }
+ r = radeon_object_pin(rdev->ih.ring_obj,
+ RADEON_GEM_DOMAIN_GTT,
+ &rdev->ih.gpu_addr);
+ if (r) {
+ DRM_ERROR("radeon: failed to pin ih ring buffer (%d).\n", r);
+ return r;
+ }
+ r = radeon_object_kmap(rdev->ih.ring_obj,
+ (void **)&rdev->ih.ring);
+ if (r) {
+ DRM_ERROR("radeon: failed to map ih ring buffer (%d).\n", r);
+ return r;
+ }
+ }
+ rdev->ih.ptr_mask = (rdev->cp.ring_size / 4) - 1;
+ rdev->ih.rptr = 0;
+
+ return 0;
+}
+
+static void r600_ih_ring_fini(struct radeon_device *rdev)
+{
+ if (rdev->ih.ring_obj) {
+ radeon_object_kunmap(rdev->ih.ring_obj);
+ radeon_object_unpin(rdev->ih.ring_obj);
+ radeon_object_unref(&rdev->ih.ring_obj);
+ rdev->ih.ring = NULL;
+ rdev->ih.ring_obj = NULL;
+ }
+}
+
+static void r600_rlc_stop(struct radeon_device *rdev)
+{
+
+ if (rdev->family >= CHIP_RV770) {
+ /* r7xx asics need to soft reset RLC before halting */
+ WREG32(SRBM_SOFT_RESET, SOFT_RESET_RLC);
+ RREG32(SRBM_SOFT_RESET);
+ udelay(15000);
+ WREG32(SRBM_SOFT_RESET, 0);
+ RREG32(SRBM_SOFT_RESET);
+ }
+
+ WREG32(RLC_CNTL, 0);
+}
+
+static void r600_rlc_start(struct radeon_device *rdev)
+{
+ WREG32(RLC_CNTL, RLC_ENABLE);
+}
+
+static int r600_rlc_init(struct radeon_device *rdev)
+{
+ u32 i;
+ const __be32 *fw_data;
+
+ if (!rdev->rlc_fw)
+ return -EINVAL;
+
+ r600_rlc_stop(rdev);
+
+ WREG32(RLC_HB_BASE, 0);
+ WREG32(RLC_HB_CNTL, 0);
+ WREG32(RLC_HB_RPTR, 0);
+ WREG32(RLC_HB_WPTR, 0);
+ WREG32(RLC_HB_WPTR_LSB_ADDR, 0);
+ WREG32(RLC_HB_WPTR_MSB_ADDR, 0);
+ WREG32(RLC_MC_CNTL, 0);
+ WREG32(RLC_UCODE_CNTL, 0);
+
+ fw_data = (const __be32 *)rdev->rlc_fw->data;
+ if (rdev->family >= CHIP_RV770) {
+ for (i = 0; i < R700_RLC_UCODE_SIZE; i++) {
+ WREG32(RLC_UCODE_ADDR, i);
+ WREG32(RLC_UCODE_DATA, be32_to_cpup(fw_data++));
+ }
+ } else {
+ for (i = 0; i < RLC_UCODE_SIZE; i++) {
+ WREG32(RLC_UCODE_ADDR, i);
+ WREG32(RLC_UCODE_DATA, be32_to_cpup(fw_data++));
+ }
+ }
+ WREG32(RLC_UCODE_ADDR, 0);
+
+ r600_rlc_start(rdev);
+
+ return 0;
+}
+
+static void r600_enable_interrupts(struct radeon_device *rdev)
+{
+ u32 ih_cntl = RREG32(IH_CNTL);
+ u32 ih_rb_cntl = RREG32(IH_RB_CNTL);
+
+ ih_cntl |= ENABLE_INTR;
+ ih_rb_cntl |= IH_RB_ENABLE;
+ WREG32(IH_CNTL, ih_cntl);
+ WREG32(IH_RB_CNTL, ih_rb_cntl);
+ rdev->ih.enabled = true;
+}
+
+static void r600_disable_interrupts(struct radeon_device *rdev)
+{
+ u32 ih_rb_cntl = RREG32(IH_RB_CNTL);
+ u32 ih_cntl = RREG32(IH_CNTL);
+
+ ih_rb_cntl &= ~IH_RB_ENABLE;
+ ih_cntl &= ~ENABLE_INTR;
+ WREG32(IH_RB_CNTL, ih_rb_cntl);
+ WREG32(IH_CNTL, ih_cntl);
+ /* set rptr, wptr to 0 */
+ WREG32(IH_RB_RPTR, 0);
+ WREG32(IH_RB_WPTR, 0);
+ rdev->ih.enabled = false;
+ rdev->ih.wptr = 0;
+ rdev->ih.rptr = 0;
+}
+
+int r600_irq_init(struct radeon_device *rdev)
+{
+ int ret = 0;
+ int rb_bufsz;
+ u32 interrupt_cntl, ih_cntl, ih_rb_cntl;
+
+ /* allocate ring */
+ ret = r600_ih_ring_alloc(rdev, rdev->ih.ring_size);
+ if (ret)
+ return ret;
+
+ /* disable irqs */
+ r600_disable_interrupts(rdev);
+
+ /* init rlc */
+ ret = r600_rlc_init(rdev);
+ if (ret) {
+ r600_ih_ring_fini(rdev);
+ return ret;
+ }
+
+ /* setup interrupt control */
+ /* set dummy read address to ring address */
+ WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+ interrupt_cntl = RREG32(INTERRUPT_CNTL);
+ /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
+ * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
+ */
+ interrupt_cntl &= ~IH_DUMMY_RD_OVERRIDE;
+ /* IH_REQ_NONSNOOP_EN=1 if ring is in non-cacheable memory, e.g., vram */
+ interrupt_cntl &= ~IH_REQ_NONSNOOP_EN;
+ WREG32(INTERRUPT_CNTL, interrupt_cntl);
+
+ WREG32(IH_RB_BASE, rdev->ih.gpu_addr >> 8);
+ rb_bufsz = drm_order(rdev->ih.ring_size / 4);
+
+ ih_rb_cntl = (IH_WPTR_OVERFLOW_ENABLE |
+ IH_WPTR_OVERFLOW_CLEAR |
+ (rb_bufsz << 1));
+ /* WPTR writeback, not yet */
+ /*ih_rb_cntl |= IH_WPTR_WRITEBACK_ENABLE;*/
+ WREG32(IH_RB_WPTR_ADDR_LO, 0);
+ WREG32(IH_RB_WPTR_ADDR_HI, 0);
+
+ WREG32(IH_RB_CNTL, ih_rb_cntl);
+
+ /* set rptr, wptr to 0 */
+ WREG32(IH_RB_RPTR, 0);
+ WREG32(IH_RB_WPTR, 0);
+
+ /* Default settings for IH_CNTL (disabled at first) */
+ ih_cntl = MC_WRREQ_CREDIT(0x10) | MC_WR_CLEAN_CNT(0x10);
+ /* RPTR_REARM only works if msi's are enabled */
+ if (rdev->msi_enabled)
+ ih_cntl |= RPTR_REARM;
+
+#ifdef __BIG_ENDIAN
+ ih_cntl |= IH_MC_SWAP(IH_MC_SWAP_32BIT);
+#endif
+ WREG32(IH_CNTL, ih_cntl);
+
+ /* force the active interrupt state to all disabled */
+ WREG32(CP_INT_CNTL, 0);
+ WREG32(GRBM_INT_CNTL, 0);
+ WREG32(DxMODE_INT_MASK, 0);
+
+ /* enable irqs */
+ r600_enable_interrupts(rdev);
+
+ return ret;
+}
+
+void r600_irq_fini(struct radeon_device *rdev)
+{
+ r600_disable_interrupts(rdev);
+ r600_rlc_stop(rdev);
+ r600_ih_ring_fini(rdev);
+}
+
+int r600_irq_set(struct radeon_device *rdev)
+{
+ uint32_t cp_int_cntl = CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE;
+ uint32_t mode_int = 0;
+
+ /* don't enable anything if the ih is disabled */
+ if (!rdev->ih.enabled)
+ return 0;
+
+ if (rdev->irq.sw_int) {
+ DRM_DEBUG("r600_irq_set: sw int\n");
+ cp_int_cntl |= RB_INT_ENABLE;
+ }
+ if (rdev->irq.crtc_vblank_int[0]) {
+ DRM_DEBUG("r600_irq_set: vblank 0\n");
+ mode_int |= D1MODE_VBLANK_INT_MASK;
+ }
+ if (rdev->irq.crtc_vblank_int[1]) {
+ DRM_DEBUG("r600_irq_set: vblank 1\n");
+ mode_int |= D2MODE_VBLANK_INT_MASK;
+ }
+
+ WREG32(CP_INT_CNTL, cp_int_cntl);
+ WREG32(DxMODE_INT_MASK, mode_int);
+
+ return 0;
+}
+
+static inline void r600_irq_ack(struct radeon_device *rdev, u32 disp_int)
+{
+
+ if (disp_int & LB_D1_VBLANK_INTERRUPT)
+ WREG32(D1MODE_VBLANK_STATUS, DxMODE_VBLANK_ACK);
+ if (disp_int & LB_D1_VLINE_INTERRUPT)
+ WREG32(D1MODE_VLINE_STATUS, DxMODE_VLINE_ACK);
+ if (disp_int & LB_D2_VBLANK_INTERRUPT)
+ WREG32(D2MODE_VBLANK_STATUS, DxMODE_VBLANK_ACK);
+ if (disp_int & LB_D2_VLINE_INTERRUPT)
+ WREG32(D2MODE_VLINE_STATUS, DxMODE_VLINE_ACK);
+
+}
+
+void r600_irq_disable(struct radeon_device *rdev)
+{
+ u32 disp_int;
+
+ r600_disable_interrupts(rdev);
+ /* Wait and acknowledge irq */
+ mdelay(1);
+ if (ASIC_IS_DCE3(rdev))
+ disp_int = RREG32(DCE3_DISP_INTERRUPT_STATUS);
+ else
+ disp_int = RREG32(DISP_INTERRUPT_STATUS);
+ r600_irq_ack(rdev, disp_int);
+}
+
+static inline u32 r600_get_ih_wptr(struct radeon_device *rdev)
+{
+ u32 wptr, tmp;
+
+ /* XXX use writeback */
+ wptr = RREG32(IH_RB_WPTR);
+
+ if (wptr & RB_OVERFLOW) {
+ WARN_ON(1);
+ /* XXX deal with overflow */
+ DRM_ERROR("IH RB overflow\n");
+ tmp = RREG32(IH_RB_CNTL);
+ tmp |= IH_WPTR_OVERFLOW_CLEAR;
+ WREG32(IH_RB_CNTL, tmp);
+ }
+ wptr = wptr & WPTR_OFFSET_MASK;
+
+ return wptr;
+}
+
+/* r600 IV Ring
+ * Each IV ring entry is 128 bits:
+ * [7:0] - interrupt source id
+ * [31:8] - reserved
+ * [59:32] - interrupt source data
+ * [127:60] - reserved
+ *
+ * The basic interrupt vector entries
+ * are decoded as follows:
+ * src_id src_data description
+ * 1 0 D1 Vblank
+ * 1 1 D1 Vline
+ * 5 0 D2 Vblank
+ * 5 1 D2 Vline
+ * 19 0 FP Hot plug detection A
+ * 19 1 FP Hot plug detection B
+ * 19 2 DAC A auto-detection
+ * 19 3 DAC B auto-detection
+ * 176 - CP_INT RB
+ * 177 - CP_INT IB1
+ * 178 - CP_INT IB2
+ * 181 - EOP Interrupt
+ * 233 - GUI Idle
+ *
+ * Note, these are based on r600 and may need to be
+ * adjusted or added to on newer asics
+ */
+
+int r600_irq_process(struct radeon_device *rdev)
+{
+ u32 wptr = r600_get_ih_wptr(rdev);
+ u32 rptr = rdev->ih.rptr;
+ u32 src_id, src_data;
+ u32 last_entry = rdev->ih.ring_size - 16;
+ u32 ring_index, disp_int;
+ unsigned long flags;
+
+ DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+
+ spin_lock_irqsave(&rdev->ih.lock, flags);
+
+ if (rptr == wptr) {
+ spin_unlock_irqrestore(&rdev->ih.lock, flags);
+ return IRQ_NONE;
+ }
+ if (rdev->shutdown) {
+ spin_unlock_irqrestore(&rdev->ih.lock, flags);
+ return IRQ_NONE;
+ }
+
+restart_ih:
+ /* display interrupts */
+ if (ASIC_IS_DCE3(rdev))
+ disp_int = RREG32(DCE3_DISP_INTERRUPT_STATUS);
+ else
+ disp_int = RREG32(DISP_INTERRUPT_STATUS);
+ r600_irq_ack(rdev, disp_int);
+
+ rdev->ih.wptr = wptr;
+ while (rptr != wptr) {
+ /* wptr/rptr are in bytes! */
+ ring_index = rptr / 4;
+ src_id = rdev->ih.ring[ring_index] & 0xff;
+ src_data = rdev->ih.ring[ring_index + 1] & 0xfffffff;
+
+ switch (src_id) {
+ case 1: /* D1 vblank/vline */
+ switch (src_data) {
+ case 0: /* D1 vblank */
+ if (disp_int & LB_D1_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 0);
+ disp_int &= ~LB_D1_VBLANK_INTERRUPT;
+ DRM_DEBUG("IH: D1 vblank\n");
+ }
+ break;
+ case 1: /* D1 vline */
+ if (disp_int & LB_D1_VLINE_INTERRUPT) {
+ disp_int &= ~LB_D1_VLINE_INTERRUPT;
+ DRM_DEBUG("IH: D1 vline\n");
+ }
+ break;
+ default:
+ DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ break;
+ }
+ break;
+ case 5: /* D2 vblank/vline */
+ switch (src_data) {
+ case 0: /* D2 vblank */
+ if (disp_int & LB_D2_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 1);
+ disp_int &= ~LB_D2_VBLANK_INTERRUPT;
+ DRM_DEBUG("IH: D2 vblank\n");
+ }
+ break;
+ case 1: /* D1 vline */
+ if (disp_int & LB_D2_VLINE_INTERRUPT) {
+ disp_int &= ~LB_D2_VLINE_INTERRUPT;
+ DRM_DEBUG("IH: D2 vline\n");
+ }
+ break;
+ default:
+ DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ break;
+ }
+ break;
+ case 176: /* CP_INT in ring buffer */
+ case 177: /* CP_INT in IB1 */
+ case 178: /* CP_INT in IB2 */
+ DRM_DEBUG("IH: CP int: 0x%08x\n", src_data);
+ radeon_fence_process(rdev);
+ break;
+ case 181: /* CP EOP event */
+ DRM_DEBUG("IH: CP EOP\n");
+ break;
+ default:
+ DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ break;
+ }
+
+ /* wptr/rptr are in bytes! */
+ if (rptr == last_entry)
+ rptr = 0;
+ else
+ rptr += 16;
+ }
+ /* make sure wptr hasn't changed while processing */
+ wptr = r600_get_ih_wptr(rdev);
+ if (wptr != rdev->ih.wptr)
+ goto restart_ih;
+ rdev->ih.rptr = rptr;
+ WREG32(IH_RB_RPTR, rdev->ih.rptr);
+ spin_unlock_irqrestore(&rdev->ih.lock, flags);
+ return IRQ_HANDLED;
+}
/*
* Debugfs info