[PATCH] I2C: ds1337 - fix 12/24 hour mode bug
DS1339 manual, page 6, chapter Date and time operation:
The DS1339 can be run in either 12-hour or 24-hour mode. Bit 6 of the
hours register is defined as the 12-hour or 24-hour mode-select bit.
When high, the 12-hour mode is selected.
Patch below makes ds1337 driver work as documented in manual.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 74ece8a..82cf959 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -165,7 +165,7 @@
buf[0] = 0; /* reg offset */
buf[1] = BIN2BCD(dt->tm_sec);
buf[2] = BIN2BCD(dt->tm_min);
- buf[3] = BIN2BCD(dt->tm_hour) | (1 << 6);
+ buf[3] = BIN2BCD(dt->tm_hour);
buf[4] = BIN2BCD(dt->tm_wday) + 1;
buf[5] = BIN2BCD(dt->tm_mday);
buf[6] = BIN2BCD(dt->tm_mon) + 1;
@@ -344,9 +344,9 @@
/* Ensure that device is set in 24-hour mode */
val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
- if ((val >= 0) && (val & (1 << 6)) == 0)
+ if ((val >= 0) && (val & (1 << 6)))
i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
- val | (1 << 6));
+ val & 0x3f);
}
static int ds1337_detach_client(struct i2c_client *client)