| /* |
| * Common Flash Interface support: |
| * Generic utility functions not dependent on command set |
| * |
| * Copyright (C) 2002 Red Hat |
| * Copyright (C) 2003 STMicroelectronics Limited |
| * |
| * This code is covered by the GPL. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <asm/io.h> |
| #include <asm/byteorder.h> |
| |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/mtd/xip.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/cfi.h> |
| |
| int __xipram cfi_qry_present(struct map_info *map, __u32 base, |
| struct cfi_private *cfi) |
| { |
| int osf = cfi->interleave * cfi->device_type; /* scale factor */ |
| map_word val[3]; |
| map_word qry[3]; |
| |
| qry[0] = cfi_build_cmd('Q', map, cfi); |
| qry[1] = cfi_build_cmd('R', map, cfi); |
| qry[2] = cfi_build_cmd('Y', map, cfi); |
| |
| val[0] = map_read(map, base + osf*0x10); |
| val[1] = map_read(map, base + osf*0x11); |
| val[2] = map_read(map, base + osf*0x12); |
| |
| if (!map_word_equal(map, qry[0], val[0])) |
| return 0; |
| |
| if (!map_word_equal(map, qry[1], val[1])) |
| return 0; |
| |
| if (!map_word_equal(map, qry[2], val[2])) |
| return 0; |
| |
| return 1; /* "QRY" found */ |
| } |
| EXPORT_SYMBOL_GPL(cfi_qry_present); |
| |
| int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map, |
| struct cfi_private *cfi) |
| { |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); |
| if (cfi_qry_present(map, base, cfi)) |
| return 1; |
| /* QRY not found probably we deal with some odd CFI chips */ |
| /* Some revisions of some old Intel chips? */ |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); |
| if (cfi_qry_present(map, base, cfi)) |
| return 1; |
| /* ST M29DW chips */ |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); |
| if (cfi_qry_present(map, base, cfi)) |
| return 1; |
| /* some old SST chips, e.g. 39VF160x/39VF320x */ |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); |
| if (cfi_qry_present(map, base, cfi)) |
| return 1; |
| /* SST 39VF640xB */ |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); |
| if (cfi_qry_present(map, base, cfi)) |
| return 1; |
| /* QRY not found */ |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cfi_qry_mode_on); |
| |
| void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, |
| struct cfi_private *cfi) |
| { |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); |
| /* M29W128G flashes require an additional reset command |
| when exit qry mode */ |
| if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E)) |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); |
| } |
| EXPORT_SYMBOL_GPL(cfi_qry_mode_off); |
| |
| struct cfi_extquery * |
| __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name) |
| { |
| struct cfi_private *cfi = map->fldrv_priv; |
| __u32 base = 0; // cfi->chips[0].start; |
| int ofs_factor = cfi->interleave * cfi->device_type; |
| int i; |
| struct cfi_extquery *extp = NULL; |
| |
| if (!adr) |
| goto out; |
| |
| printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); |
| |
| extp = kmalloc(size, GFP_KERNEL); |
| if (!extp) { |
| printk(KERN_ERR "Failed to allocate memory\n"); |
| goto out; |
| } |
| |
| #ifdef CONFIG_MTD_XIP |
| local_irq_disable(); |
| #endif |
| |
| /* Switch it into Query Mode */ |
| cfi_qry_mode_on(base, map, cfi); |
| /* Read in the Extended Query Table */ |
| for (i=0; i<size; i++) { |
| ((unsigned char *)extp)[i] = |
| cfi_read_query(map, base+((adr+i)*ofs_factor)); |
| } |
| |
| /* Make sure it returns to read mode */ |
| cfi_qry_mode_off(base, map, cfi); |
| |
| #ifdef CONFIG_MTD_XIP |
| (void) map_read(map, base); |
| xip_iprefetch(); |
| local_irq_enable(); |
| #endif |
| |
| out: return extp; |
| } |
| |
| EXPORT_SYMBOL(cfi_read_pri); |
| |
| void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups) |
| { |
| struct map_info *map = mtd->priv; |
| struct cfi_private *cfi = map->fldrv_priv; |
| struct cfi_fixup *f; |
| |
| for (f=fixups; f->fixup; f++) { |
| if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && |
| ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { |
| f->fixup(mtd); |
| } |
| } |
| } |
| |
| EXPORT_SYMBOL(cfi_fixup); |
| |
| int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, |
| loff_t ofs, size_t len, void *thunk) |
| { |
| struct map_info *map = mtd->priv; |
| struct cfi_private *cfi = map->fldrv_priv; |
| unsigned long adr; |
| int chipnum, ret = 0; |
| int i, first; |
| struct mtd_erase_region_info *regions = mtd->eraseregions; |
| |
| /* Check that both start and end of the requested erase are |
| * aligned with the erasesize at the appropriate addresses. |
| */ |
| |
| i = 0; |
| |
| /* Skip all erase regions which are ended before the start of |
| the requested erase. Actually, to save on the calculations, |
| we skip to the first erase region which starts after the |
| start of the requested erase, and then go back one. |
| */ |
| |
| while (i < mtd->numeraseregions && ofs >= regions[i].offset) |
| i++; |
| i--; |
| |
| /* OK, now i is pointing at the erase region in which this |
| erase request starts. Check the start of the requested |
| erase range is aligned with the erase size which is in |
| effect here. |
| */ |
| |
| if (ofs & (regions[i].erasesize-1)) |
| return -EINVAL; |
| |
| /* Remember the erase region we start on */ |
| first = i; |
| |
| /* Next, check that the end of the requested erase is aligned |
| * with the erase region at that address. |
| */ |
| |
| while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset) |
| i++; |
| |
| /* As before, drop back one to point at the region in which |
| the address actually falls |
| */ |
| i--; |
| |
| if ((ofs + len) & (regions[i].erasesize-1)) |
| return -EINVAL; |
| |
| chipnum = ofs >> cfi->chipshift; |
| adr = ofs - (chipnum << cfi->chipshift); |
| |
| i=first; |
| |
| while(len) { |
| int size = regions[i].erasesize; |
| |
| ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk); |
| |
| if (ret) |
| return ret; |
| |
| adr += size; |
| ofs += size; |
| len -= size; |
| |
| if (ofs == regions[i].offset + size * regions[i].numblocks) |
| i++; |
| |
| if (adr >> cfi->chipshift) { |
| adr = 0; |
| chipnum++; |
| |
| if (chipnum >= cfi->numchips) |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(cfi_varsize_frob); |
| |
| MODULE_LICENSE("GPL"); |