| /* |
| * |
| * Definitions for H3600 Handheld Computer |
| * |
| * Copyright 2000 Compaq Computer Corporation. |
| * |
| * Use consistent with the GNU GPL is permitted, |
| * provided that this copyright notice is |
| * preserved in its entirety in all copies and derived works. |
| * |
| * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, |
| * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS |
| * FITNESS FOR ANY PARTICULAR PURPOSE. |
| * |
| * Author: Jamey Hicks. |
| * |
| * History: |
| * |
| * 2001-10-?? Andrew Christian Added support for iPAQ H3800 |
| * |
| */ |
| |
| #ifndef _INCLUDE_H3600_GPIO_H_ |
| #define _INCLUDE_H3600_GPIO_H_ |
| |
| /* |
| * GPIO lines that are common across ALL iPAQ models are in "h3600.h" |
| * This file contains machine-specific definitions |
| */ |
| |
| #define GPIO_H3600_SUSPEND GPIO_GPIO (0) |
| /* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */ |
| #define GPIO_H3100_BT_ON GPIO_GPIO (2) |
| #define GPIO_H3100_GPIO3 GPIO_GPIO (3) |
| #define GPIO_H3100_QMUTE GPIO_GPIO (4) |
| #define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5) |
| #define GPIO_H3100_AUD_ON GPIO_GPIO (6) |
| #define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7) |
| #define GPIO_H3100_IR_ON GPIO_GPIO (8) |
| #define GPIO_H3100_IR_FSEL GPIO_GPIO (9) |
| |
| /* for H3600, audio sample rate clock generator */ |
| #define GPIO_H3600_CLK_SET0 GPIO_GPIO (12) |
| #define GPIO_H3600_CLK_SET1 GPIO_GPIO (13) |
| |
| #define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18) |
| #define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */ |
| #define GPIO_H3600_OPT_LOCK GPIO_GPIO (22) |
| #define GPIO_H3600_OPT_DET GPIO_GPIO (27) |
| |
| /* H3800 specific pins */ |
| #define GPIO_H3800_AC_IN GPIO_GPIO (12) |
| #define GPIO_H3800_COM_DSR GPIO_GPIO (13) |
| #define GPIO_H3800_MMC_INT GPIO_GPIO (18) |
| #define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */ |
| #define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22) |
| #define GPIO_H3800_CLK_OUT GPIO_GPIO (27) |
| |
| /****************************************************/ |
| |
| #define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 |
| #define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 |
| |
| #define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18 |
| #define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */ |
| |
| /* H3100 / 3600 EGPIO pins */ |
| #define EGPIO_H3600_VPP_ON (1 << 0) |
| #define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ |
| #define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */ |
| #define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */ |
| #define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */ |
| #define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */ |
| #define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */ |
| #define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */ |
| |
| /* H3600 only EGPIO pins */ |
| #define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */ |
| #define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */ |
| #define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */ |
| #define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */ |
| #define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */ |
| #define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */ |
| #define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ |
| #define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ |
| |
| /********************* H3800, ASIC #2 ********************/ |
| |
| #define _H3800_ASIC2_Base (H3600_EGPIO_VIRT) |
| #define H3800_ASIC2_OFFSET(s,x,y) \ |
| (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) |
| #define H3800_ASIC2_NOFFSET(s,x,n,y) \ |
| (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) |
| |
| #define _H3800_ASIC2_GPIO_Base 0x0000 |
| #define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */ |
| #define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ |
| #define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ |
| #define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ |
| #define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */ |
| #define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */ |
| #define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */ |
| #define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ |
| #define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */ |
| #define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */ |
| |
| #define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction ) |
| #define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType ) |
| #define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType ) |
| #define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType ) |
| #define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear ) |
| #define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag ) |
| #define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data ) |
| #define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut ) |
| #define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable ) |
| #define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate ) |
| |
| #define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */ |
| #define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */ |
| #define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */ |
| #define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */ |
| #define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */ |
| #define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */ |
| #define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */ |
| #define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */ |
| #define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */ |
| #define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */ |
| #define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */ |
| #define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */ |
| |
| #define _H3800_ASIC2_KPIO_Base 0x0200 |
| #define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */ |
| #define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ |
| #define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ |
| #define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ |
| #define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */ |
| #define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */ |
| #define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */ |
| #define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ |
| #define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */ |
| #define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */ |
| |
| #define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction ) |
| #define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType ) |
| #define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType ) |
| #define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType ) |
| #define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear ) |
| #define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag ) |
| #define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data ) |
| #define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut ) |
| #define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable ) |
| #define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate ) |
| |
| #define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 ) |
| #define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 ) |
| #define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 ) |
| #define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 ) |
| #define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 ) |
| #define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 ) |
| #define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 ) |
| #define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 ) |
| |
| #define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */ |
| #define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */ |
| #define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */ |
| #define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */ |
| #define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */ |
| #define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */ |
| #define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */ |
| #define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */ |
| #define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */ |
| #define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */ |
| #define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */ |
| #define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */ |
| |
| /* Alternate KPIO functions (set by default) */ |
| #define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */ |
| #define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */ |
| #define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */ |
| #define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */ |
| #define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */ |
| |
| #define _H3800_ASIC2_SPI_Base 0x0400 |
| #define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */ |
| #define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */ |
| #define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */ |
| |
| #define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control ) |
| #define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data ) |
| #define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled ) |
| |
| #define _H3800_ASIC2_PWM_0_Base 0x0600 |
| #define _H3800_ASIC2_PWM_1_Base 0x0700 |
| #define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */ |
| #define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */ |
| #define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */ |
| |
| #define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase ) |
| #define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime ) |
| #define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime ) |
| |
| #define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase ) |
| #define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime ) |
| #define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime ) |
| |
| #define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */ |
| #define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */ |
| #define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */ |
| |
| #define _H3800_ASIC2_LED_0_Base 0x0800 |
| #define _H3800_ASIC2_LED_1_Base 0x0880 |
| #define _H3800_ASIC2_LED_2_Base 0x0900 |
| #define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */ |
| #define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */ |
| #define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */ |
| #define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */ |
| |
| #define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase ) |
| #define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime ) |
| #define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime ) |
| #define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock ) |
| |
| #define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase ) |
| #define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime ) |
| #define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime ) |
| #define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock ) |
| |
| #define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase ) |
| #define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime ) |
| #define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime ) |
| #define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock ) |
| |
| #define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */ |
| #define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */ |
| #define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 ) |
| #define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */ |
| |
| #define _H3800_ASIC2_UART_0_Base 0x0A00 |
| #define _H3800_ASIC2_UART_1_Base 0x0C00 |
| #define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */ |
| #define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */ |
| #define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */ |
| #define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */ |
| |
| #define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive ) |
| #define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit ) |
| #define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable ) |
| #define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify ) |
| #define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl ) |
| #define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl ) |
| #define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus ) |
| #define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus ) |
| #define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad ) |
| #define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL ) |
| #define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH ) |
| |
| #define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive ) |
| #define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit ) |
| #define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable ) |
| #define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify ) |
| #define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl ) |
| #define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl ) |
| #define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus ) |
| #define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus ) |
| #define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad ) |
| #define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL ) |
| #define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH ) |
| |
| #define _H3800_ASIC2_TIMER_Base 0x0E00 |
| #define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */ |
| |
| #define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command ) |
| |
| #define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */ |
| #define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */ |
| #define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */ |
| #define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */ |
| #define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */ |
| #define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */ |
| #define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */ |
| #define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */ |
| |
| #define _H3800_ASIC2_CLOCK_Base 0x1000 |
| #define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */ |
| |
| #define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable ) |
| |
| #define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */ |
| #define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */ |
| #define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */ |
| #define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */ |
| #define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */ |
| #define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */ |
| #define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */ |
| #define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */ |
| #define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */ |
| #define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */ |
| #define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */ |
| #define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */ |
| #define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */ |
| #define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */ |
| #define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */ |
| #define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */ |
| #define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */ |
| #define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */ |
| #define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */ |
| |
| #define _H3800_ASIC2_ADC_Base 0x1200 |
| #define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */ |
| #define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */ |
| #define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */ |
| |
| #define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer ) |
| #define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus ) |
| #define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data ) |
| |
| #define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */ |
| #define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */ |
| |
| #define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */ |
| #define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 ) |
| #define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 ) |
| #define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */ |
| #define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */ |
| |
| |
| #define _H3800_ASIC2_INTR_Base 0x1600 |
| #define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */ |
| #define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */ |
| #define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */ |
| |
| #define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag ) |
| #define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale ) |
| #define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet ) |
| |
| #define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */ |
| #define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */ |
| #define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */ |
| #define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 ) |
| #define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 ) |
| #define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 ) |
| #define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 ) |
| |
| #define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */ |
| #define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */ |
| |
| |
| #define _H3800_ASIC2_OWM_Base 0x1800 |
| #define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */ |
| #define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */ |
| #define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */ |
| #define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */ |
| #define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */ |
| |
| #define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command ) |
| #define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data ) |
| #define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt ) |
| #define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable ) |
| #define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor ) |
| |
| #define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */ |
| #define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */ |
| #define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */ |
| #define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */ |
| |
| #define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */ |
| #define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */ |
| #define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */ |
| #define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */ |
| #define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */ |
| |
| #define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */ |
| #define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */ |
| #define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */ |
| #define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */ |
| #define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */ |
| |
| #define _H3800_ASIC2_FlashCtl_Base 0x1A00 |
| |
| /****************************************************/ |
| /* H3800, ASIC #1 |
| * This ASIC is accesed through ASIC #2, and |
| * mapped into the 1c00 - 1f00 region |
| */ |
| |
| #define H3800_ASIC1_OFFSET(s,x,y) \ |
| (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1)))) |
| |
| #define _H3800_ASIC1_MMC_Base 0x1c00 |
| |
| #define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */ |
| #define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */ |
| #define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */ |
| #define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */ |
| #define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */ |
| #define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */ |
| #define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */ |
| #define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */ |
| #define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */ |
| #define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */ |
| #define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */ |
| #define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */ |
| #define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */ |
| #define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */ |
| #define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */ |
| |
| #define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock ) |
| #define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status ) |
| #define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate ) |
| #define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister ) |
| #define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont ) |
| #define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout ) |
| #define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout ) |
| #define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength ) |
| #define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks ) |
| #define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask ) |
| #define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber ) |
| #define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH ) |
| #define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL ) |
| #define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo ) |
| #define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull ) |
| |
| #define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */ |
| #define H3800_ASIC1_MMC_START_CLOCK (1 << 1) |
| |
| #define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0) |
| #define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1) |
| #define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2) |
| #define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3) |
| #define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */ |
| #define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5) |
| #define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6) |
| #define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7) |
| #define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */ |
| #define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */ |
| #define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */ |
| #define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */ |
| |
| #define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */ |
| #define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */ |
| #define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */ |
| #define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */ |
| |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00 |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01 |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02 |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03 |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */ |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */ |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */ |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */ |
| #define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */ |
| |
| #define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0) |
| #define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1) |
| #define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2) |
| #define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3) |
| |
| #define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0) |
| |
| /********* GPIO **********/ |
| |
| #define _H3800_ASIC1_GPIO_Base 0x1e00 |
| |
| #define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */ |
| #define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */ |
| #define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */ |
| #define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */ |
| #define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */ |
| #define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */ |
| #define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */ |
| #define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */ |
| #define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */ |
| #define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */ |
| #define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ |
| #define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */ |
| #define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */ |
| #define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */ |
| #define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */ |
| #define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */ |
| |
| #define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask ) |
| #define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction ) |
| #define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out ) |
| #define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType ) |
| #define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger ) |
| #define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger ) |
| #define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus ) |
| #define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus ) |
| #define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State ) |
| #define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset ) |
| #define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask ) |
| #define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir ) |
| #define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut ) |
| #define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status ) |
| #define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir ) |
| #define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut ) |
| |
| #define H3800_ASIC1_GPIO_STATE_MASK (1 << 0) |
| #define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1) |
| #define H3800_ASIC1_GPIO_STATE_OUT (1 << 2) |
| #define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3) |
| #define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4) |
| #define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5) |
| |
| #define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0) |
| #define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1) |
| #define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2) |
| |
| /* These are all outputs */ |
| #define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */ |
| #define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */ |
| #define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */ |
| #define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */ |
| #define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */ |
| #define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */ |
| #define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */ |
| #define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */ |
| #define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */ |
| #define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */ |
| #define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */ |
| #define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */ |
| #define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */ |
| #define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */ |
| #define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */ |
| |
| /* Write enable for the flash */ |
| |
| #define _H3800_ASIC1_FlashWP_Base 0x1F00 |
| #define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */ |
| #define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON ) |
| |
| #endif /* _INCLUDE_H3600_GPIO_H_ */ |