staging: rtl8192su: update r8192U.h
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h
index ddf3cf1..741c6bf 100644
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -1,19 +1,28 @@
-/*
- This is part of rtl8187 OpenSource driver.
- Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver
-
- Parts of this driver are based on the rtl8192 driver skeleton
- from Patric Schenke & Andres Salomon
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
- We want to tanks the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ * Linux device driver for RTL8192U
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
#ifndef R819xU_H
#define R819xU_H
@@ -110,6 +119,7 @@
#define COMP_TRACE BIT0 // For function call tracing.
#define COMP_DBG BIT1 // Only for temporary debug message.
+#define COMP_MLME BIT1
#define COMP_INIT BIT2 // during driver initialization / halt / reset.
@@ -133,12 +143,14 @@
#define COMP_SEC BIT20 // Event handling
#define COMP_LED BIT21 // For LED.
#define COMP_RF BIT22 // For RF.
+#define COMP_RXDESC BIT23
#define COMP_RXDESC BIT23 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
#define COMP_FIRMWARE BIT24 //for firmware downloading
#define COMP_HT BIT25 // For 802.11n HT related information. by Emily 2006-8-11
#define COMP_AMSDU BIT26 // For A-MSDU Debugging
+#define COMP_PS BIT26
#define COMP_SCAN BIT27
#define COMP_CMD BIT28
@@ -569,12 +581,6 @@
// Driver info are written to the begining of the RxBuffer
//
typedef struct rx_drvinfo_819x_usb{
- //
- // Driver info contain PHY status and other variabel size info
- // PHY Status content as below
- //
-
- //DWORD 0
u8 gain_trsw[4];
//DWORD 1
@@ -622,6 +628,9 @@
#endif
#define scrclng 4 // octets for crc32 (FCS, ICV)
+#define HAL_DM_DIG_DISABLE BIT0
+#define HAL_DM_HIPWR_DISABLE BIT1
+
typedef enum rf_optype
{
RF_OP_By_SW_3wire = 0,
@@ -972,8 +981,26 @@
RT_CID_Nettronix = 11,
RT_CID_DLINK = 12,
RT_CID_PRONET = 13,
+ RT_CID_COREGA = 14,
+ RT_CID_819x_ALPHA = 15,
+ RT_CID_819x_Sitecom = 16,
+ RT_CID_CCX = 17,
+ RT_CID_819x_Lenovo = 18,
+ RT_CID_819x_QMI = 19,
+ RT_CID_819x_Edimax_Belkin = 20,
+ RT_CID_819x_Sercomm_Belkin = 21,
+ RT_CID_819x_CAMEO1 = 22,
+ RT_CID_819x_MSI = 23,
+ RT_CID_819x_Acer = 24,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
+typedef enum _RT_OP_MODE{
+ RT_OP_MODE_AP,
+ RT_OP_MODE_INFRASTRUCTURE,
+ RT_OP_MODE_IBSS,
+ RT_OP_MODE_NO_LINK,
+}RT_OP_MODE, *PRT_OP_MODE;
+
typedef enum _RESET_TYPE {
RESET_TYPE_NORESET = 0x00,
RESET_TYPE_NORMAL = 0x01,
@@ -1017,11 +1044,12 @@
struct rtl819x_ops* ops;
struct usb_device *udev;
/* added for maintain info from eeprom */
+ short epromtype;
u16 eeprom_vid;
u16 eeprom_pid;
u8 eeprom_CustomerID;
u8 eeprom_SubCustomerID;
- u8 eeprom_ChannelPlan;
+ u16 eeprom_ChannelPlan;
RT_CUSTOMER_ID CustomerID;
LED_STRATEGY_819xUsb LedStrategy;
u8 txqueue_to_outpipemap[9];
@@ -1033,8 +1061,11 @@
int irq;
struct ieee80211_device *ieee80211;
+ u8 RATRTableBitmap;
+
+ u32 IC_Cut;
short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
- u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
+ u32 card_8192_version; /* if TCR reports card V B/C this discriminates */
short enable_gpio0;
enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
short hw_plcp_len;
@@ -1044,7 +1075,9 @@
spinlock_t tx_lock;
spinlock_t ps_lock;
struct mutex mutex;
+ bool ps_force;
spinlock_t rf_lock; //used to lock rf write operation added by wb
+ spinlock_t rf_ps_lock;
u16 irq_mask;
short chan;
@@ -1053,6 +1086,7 @@
short up;
short crcmon; //if 1 allow bad crc frame reception in monitor mode
+ bool bSurpriseRemoved;
struct semaphore wx_sem;
struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
@@ -1064,8 +1098,8 @@
u8 (*rf_set_chan)(struct net_device *dev,u8 ch);
void (*rf_close)(struct net_device *dev);
void (*rf_init)(struct net_device *dev);
- //short rate;
short promisc;
+ u32 mc_filter[2];
/*stats*/
struct Stats stats;
struct iw_statistics wstats;
@@ -1086,6 +1120,7 @@
struct tasklet_struct irq_rx_tasklet;
+ struct tasklet_struct irq_tx_tasklet;
struct urb *rxurb_task;
//2 Tx Related variables
@@ -1112,6 +1147,7 @@
struct ChnlAccessSetting ChannelAccessSetting;
struct work_struct reset_wq;
+ struct work_struct mcast_wq;
/**********************************************************/
//for rtl819xUsb
@@ -1121,6 +1157,7 @@
bool bDcut;
bool bCurrentRxAggrEnable;
u8 Rf_Mode; //add for Firmware RF -R/W switch
+ u8 FwRsvdTxPageCfg;
prt_firmware pFirmware;
RTL8192SUSB_LOOPBACK_E LoopbackMode;
bool usb_error;
@@ -1129,12 +1166,19 @@
u8 EEPROMThermalMeter;
u8 EEPROMPwDiff;
u8 EEPROMCrystalCap;
+ u8 EEPROMBluetoothCoexist;
u8 EEPROM_Def_Ver;
u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
u8 EEPROMTxPowerLevelCCK_V1[3];
u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G
+ u8 EEPROMOptional;
+ u8 ShowRateMode;
+ bool bForcedShowRxRate;
+
+ u32 RfRegChnlVal[2];
+
bool bDmDisableProtect;
bool bIgnoreDiffRateTxPowerOffset;
@@ -1169,6 +1213,8 @@
u8 EEPROMTxPwrTkMode;
u8 bTXPowerDataReadFromEEPORM;
+ u8 EEPROMRegulatory;
+ u8 EEPROMPwrGroup[2][3];
u8 EEPROMVersion;
u8 EEPROMUsbEndPointNumber;
@@ -1201,8 +1247,11 @@
u32 Pwr_Track;
u8 TxPowerDiff;
u8 AntennaTxPwDiff[2]; // Antenna gain offset, index 0 for B, 1 for C, and 2 for D
+ u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+ u8 ThermalValue;
u8 CrystalCap; // CrystalCap.
- u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+ u8 BluetoothCoexist;
+ u8 ExternalPA;
u8 CckPwEnl;
// Use to calculate PWBD.
@@ -1215,7 +1264,9 @@
u8 SwChnlStep;
u8 SetBWModeInProgress;
HT_CHANNEL_WIDTH CurrentChannelBW;
+ bool bChnlPlanFromHW;
u8 ChannelPlan;
+ u16 RegChannelPlan;
u8 pwrGroupCnt;
// 8190 40MHz mode
//
@@ -1246,6 +1297,8 @@
bool btxpower_trackingInit;
u8 OFDM_index;
u8 CCK_index;
+ u8 Record_CCK_20Mindex;
+ u8 Record_CCK_40Mindex;
// CCK TX Power Tracking
ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength];
ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
@@ -1263,6 +1316,11 @@
bool bcck_in_ch14;
bool btxpowerdata_readfromEEPORM;
u16 TSSI_13dBm;
+ u8 CCKPresentAttentuation_20Mdefault;
+ u8 CCKPresentAttentuation_40Mdefault;
+ char CCKPresentAttentuation_difference;
+ char CCKPresentAttentuation;
+ bool bDMInitialGainEnable;
//For Backup Initial Gain
init_gain initgain_backup;
u8 DefaultInitialGain[4];
@@ -1287,6 +1345,13 @@
// gpio
bool bHwRadioOff;
+ bool isRFOff;
+ bool bInPowerSaveMode;
+
+ bool RFChangeInProgress;
+ bool RegRfOff;
+ u8 bHwRfOffAction;
+
u32 reset_count;
bool bpbc_pressed;
// debug
@@ -1307,6 +1372,7 @@
int IrpPendingCount;
bool bResetInProgress;
bool force_reset;
+ bool force_lps;
u8 InitialGainOperateType;
u16 SifsTime;
@@ -1402,6 +1468,9 @@
};
#endif
+void LedControl8192SUsb(struct net_device *dev, LED_CTL_MODE LedAction);
+void InitSwLeds(struct net_device *dev);
+void DeInitSwLeds(struct net_device *dev);
short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
bool FirmwareDownload92S(struct net_device *dev);